Amazon B07NXJT6NN Operating and safety instructions

created by: Impala Services Ltd.Page size: 139.7 x 107.95 mm
B07NXJT6NN
150-Sheet Autofeed Micro-Cut Paper Shredder
Trituradora de Papel Microcorte de Alimentación
Automática de 150 Hojas
Déchiqueteuse Micro-Coupe à Alimentation
Automatique, 150 Feuilles

English ..................................... 3
Español.................................. 20
Français ................................. 38

3
Welcome Guide •English
Contents:
Before getting started, ensure the package contains the following components:
1
2
4
5
6
7
3
1Top lid button 5Paper tray viewing window
2Pull-out wastebasket 6Manual feed slot
3Casters 7Main power ON/OFF switch
(on the back side)
4Control panel

4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If this product is passed
to a third party, then these instructions must be included.
When using electrical appliances, basic safety precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons including the following:
Do not open lid once shred cycle has started.
• Always turn the shredder off and unplug the power cord from the power outlet when not in use,
before cleaning, moving, or emptying the wastebasket.
Risk of fire! Never use any petroleum-based or flammable oils or lubricants in
or around the machine as some oils can combust, causing serious injury.
• Never dispose of flammable chemicals or materials that have come into contact with flammable
chemicals (for example, nail polish, acetone and gasoline) in the shredder basket.
• Never shred large paper clips, window or insulated envelopes, continuous forms, newspaper,
bound pages (for example: notepads, checkbooks, magazines, etc...), transparencies,
laminated documents, cardboard, any items with adhesives, hard materials or plastic (except
credit cards).
• A power outlet should be near the equipment and be easily accessible.
• Never let the wastebasket become full. This will lead to shredded material being pulled back up
into the shredder and cause jams.
• Never place the shredder near water or any heat source.
• Do not use the shredder if the power cord is damaged in any way.
• Do not attempt to service this product yourself as doing so may expose you to sharp cutting
blades and/or electricity and will void the manufacturer’s warranty.
• Never try to clean or clear the shredder blade.
• Never shred beyond the specified sheet capacity. This may result in extensive damage to the
machine.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTICE
CAUTION
WARNING

5
Read the instructions before use. Do not spray or keep any aerosol
products in or around the shredder.
Avoid touching the feed slot with
hands.
Keep loose clothing or jewelry away
from the feed slot.
Product is not intended for use by
children (product is not a toy). Avoid getting hair near the feed slot.
Do not insert foreign objects into
the feed slot.
Do not shred:
Adhesive labels Avoid placing staple side here
Stapled papers Unopened mail / envelopes
>1/4” (6mm) heavy duty paper Stapled papers
Folded sheets Bound documents
Binder clips Jumbo clips
CDs / DVDs Laminated sheets / magazines
No staples in center Avoid placing staple side here

6
Before First Use
• Check for transport damage.
• Before connecting the product to the power supply, check that the power supply voltage and
current rating corresponds with the power supply details shown on the product rating label.
Risk of suffocation! Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Installation
1. Make sure the basket door is shut and securely closed. The safety power cut-off will not
operate if the door is open. Shredders with pull-out wastebaskets will also cut power upon bin
removal. The supplied wastebasket activates a safety switch, which allows the shredder to be
operable.
2. The power outlet should be near the equipment and easily accessible.
3. Connect the power cord to any standard 120 V AC outlet.
Micro-cut shredders have very sharp exposed blades on the underside.
DANGER
CAUTION

7
Operation
Main power switch 7
• The main power switch 7must be “ON” to operate. In an emergency, stop the shredder
immediately and turn switch to “OFF” mode. This completely disconnects all power to the
machine.
Control panel 4
Auto-On (blue): This setting automatically starts the shredder upon loading paper into
the paper tray or inserting paper into the manual feed slot. When the paper has passed
through, the shredder automatically stops.
Off: This setting turns off all features of the shredder. For safety reasons, we recommend
that you leave the shredder in the “OFF” position when it is unattended or not in use.
Reverse: In the unlikely event of a paper jam, use the reverse setting to help clear
the cutters of paper that did not pass through. Never attempt to clear a jam using the
reverse function until you have emptied the wastebasket.
Forward: The forward setting can also be used to help clear the cutters in the event of
a paper jam. This allows you to manually activate the shredder to cutting mode.
LED status indicators
Overheat: The Red LED light indicates the shredder has shredded continuously
beyond the maximum running time, has overheated, and will automatically shut off. If
this happens, switch the shredder to “OFF” for 45minutes or longer before resuming
normal operation.
Overload: The Red LED light indicates when too much paper is inserted. Use
“Reverse” mode to back up and reduce number of sheets.
Door open: The Red LED light indicates the shredder basket or top lid is not closed
properly. Shredders with pull-out wastebaskets feature a safety power cut-off upon bin
removal. Make sure the pull-out wastebasket is properly back in place and the blue
“Power On” indicator is lit.

8
Bin full: When the wastebasket is full, the Red LED light will indicate it needs to be
emptied. While lit, the shredder will not operate until the wastebasket is cleared.
Feed Error: The Red LED light indicates the paper in the paper tray cannot be grabbed
by the feeders, open the lid to make sure the papers are unfolded and positioned
properly.
Features:
• Auto-Reverse Technology: When the shredder detects over-capacity shredding, the motor will
immediately stop and reject paper before actual shredding begins.
• Energy-Saving Auto Power Sleep: This setting turns off all features of the shredder. For
safety reasons, we recommend that you leave shredder in the “OFF” position whenever it is
unattended or not in use.
Auto Feed Shredding Operation
Auto Feed Shredding Capacity:
Shreds:
• Maximum 150sheets of letter size (8-1/2” x 11”) 20lb bond paper per load.
• Up to 20sheets of stapled paper stacks.
• Up to 20sheets of clipped paper stacks.
Power on shredder:
Plug into grounded standard
US household power outlet
(120 V~).
Put main power switch in
ON (I) position.
Turn power on.

9
Open lid and load paper
*Paper should be flat and aligned with paper tray.
NOTICE

10
Close lid:
• The shredder automatically starts when you close the lid.
Risk of pinching hand! Keep fingers/clothes/any other accessories away
while closing the lid.
Manual Feed Shredding Operation
Power on shredder
Plug into grounded
standard US household
power outlet (120 V~).
Put main power switch in
ON (I) position.
Turn power on.
Make sure you do not exceed the max.
sheet count per pass (10sheets). Insert
paper as straight as possible into feed
slot and release.
Insert one credit card at a time into the
middle of the feed slot.
CAUTION