Ambar EPC 05 User manual

Bluetooth Headset with Charging Case
User Manual

Thank you for selecting this Ambar Bluetooth Headset! The product
Bluetooth headset 4.2 provides high grade tone due to the noise
cancellation technology with the function of Handsfree. Please carefully
read the User Manual before using the product.
Functions

Micro USB Charging Port
1. 1.0-2.0h (full charging); 5.0V, 500mAh;
2. Best performance with full battery.
Noise Cancelling
Double Microphones Noise Cancelling for Wind Noise Reduction.
Microphone Mute Button
Press Mute-button once to mute the Microphone.
LED Light
1. Under charging, red indicator is on;
2. After charging is full, the blue indicator is on;
3. Low battery, red indicator flashe twice with voice prompt
Function
Operation
Enable Pairing Mode
Hold the Multi-function Button for 5s
Power On
Turn the Power button to ON state
Power Off
Turn the Power button to OFF state
Answer Telephone
Click the Multi-function Button once
End up Calling
Click the Multi-function Button once
Reject the Incoming Call
Hold the Multi-function Button for 2s
Latest Number Redialing
Double click the Multi-function Button
Stop the Outbound Call
Click the Multi-function Button once
Voice Dialing
Hold the Multi-function Button for 1s
Microphone Mute
Switching
Click the Mute Button once
Volume Up/Down
Click the volume +/- Button once
Pause/Play
Click the Multi-function Button once
Previous/next Track
Hold the volume +/- Button for 2s

Steps to Connect Wireless Headset with the Cell Phone
1. Turn on the power button, then hold the Multi-function Button (for about 5s) till
the headset indicator flashes in red and blue by turn to enter in the Searching state.
(Voice prompt “pairing", under the pairing state, and then it can be found by Mobile
Phone);
2. Enable Wireless of the mobile phone, click Search Wireless Device till the mobile
phone finds the headset signal, and then the name of headset Ambar EPC 05 will be
displayed;
3. Click the headset name Ambar EPC 05 to connect, after successfully connected,
voice prompt “connected", the headset indicator flashes in blue;
4. Input password: 0000 if needed (default password is 0000).
Here, congratulations, you have successfully connected the Headset, enjoy music
and make calling with It.
Step to Connect with Two Mobile Phones
1. Turn on the power button, then hold the Multi-function Button for about 5s till the
headset indicator flashes in red and blue by turn to enter in the Searching state,
voice prompt “pairing";
2. Enable the Wireless function of mobile phone 1, click Search Wireless Device to
search the headset name Ambar EPC 05, and then click Pairing to connect, voice
prompt “connected";
3. Turn off the Wireless function of mobile phone 1, hold the headset Multi-function
Button till the red indicator lights on, then turn off the headset;
4. Enable the Wireless headset again to enter in the Searching state;
5. Enable the Wireless function of mobile phone 2, click Search Wireless Device to
search the headset name Ambar EPC 05, and then click Pairing to connect;
6. Enable the Wireless function of mobile phone 1 and find the targeted headset, and
then click to connect.

Please use headset near your mobile phone.
The straight distance between your mobile phone and headset reaches 10m without
obstacle, if it exceeds 10m, it may possibly cause tone drop and disconnection.
How to Reconnect:
1. Your headset will try to reconnect the lost connection;
2. If the headset doesn't try to reconnect, please click the Multi-function Button
once or manually connect with the Wireless equipment menu of the mobile phone.
Recover Default Settings
When charging, hold the Multi-function Button for about 4s till the blue indicator
flashes to recover default settings.
Troubleshooting
The mobile phone can't find the headset Possible Reasons:
1. The headset is not under ON and standby state;
2. The headset program is error;
3. The program of the mobile phone is error.
Solutions:
1. After turning off the headset, hold the Multi-function Button (red and blue
indicator flashes by turn) to enable pairing state;
2. Recover the Wireless headset's default settings;
3. After restarting the mobile phone, remove all pairing data in the Wireless of the
mobile phone.

Cautions:
1. After the Wireless headset has entered in the pairing mode, it will connect
within 2 min, otherwise, the headset will automatically turn off;
2. When charging, hold the Multi-function Button for about 4s till the blue indicator
flashes to recover default setting.
II. No sound from the headset
Possible Reasons:
1. The volume of the mobile phone is unsuitable;
2. The Wireless headset and mobile phone are not connected correctly;
3. The Wireless headset is out of the working range.
Solutions:
1. Adjust the volume in the mobile phone;
2. Operate with the reference of the use steps;
3. Keep the headset in the range of 10m to the mobile phone without any obstacle.
Cautions:
1. Do not have any other operation when searching headset for avoiding program
error;
2. Please use headset near the mobile phone to assure best effect.
III. Charging red indicator doesn’t light on
Possible Reasons:
The headset has not been used for a long period.
Solutions:
Charge headset for about 30min, and then the red indicator may light on.
Cautions:
It will drop the capacity and service life of the battery if it is over charged or the
Wireless headset is stored in the environment such as closed car.