Amber Grandview GRFF H Series User manual

FLOCKED FRAME SCREEN
USER MANUAL
Protecting Your Screen:
• Keep away from direct sunlight or high temperatures.
• Use a soft brush or cloth to lightly remove any
foreign particles.
Cleaning Your Screen:
• Do not use any solvents, chemicals or abrasive cleaners
on the screen surface.
• Use a mild detergent with warm water to remove any
marks on the surface or screen case.
• Always immediately dab the screen with a lint free
soft cloth to avoid soap marks.
• Do not scrub the surface.
Warranty: 12 Months
Happy Viewing!
There is a locking latch on the bottom wall mount only.
Step 6
Up Bracket
Bottom Bracket
Secure Button
Locking Latch
Fig 16
Fix the mounts onto the wall separately. (Fig 17-18)
H = Viewing height + 110mm
Step 7
Up Bracket
Bottom Bracket
h
Fig 17 Fig 18
Hook screen onto the top mount and bottom mount. (Fig 19-20)
Step 8
Fig 19 Fig 20
To uninstall the screen, please press the latch towards the wall to
release bottom frame from bottom mount, then lift the screen a
little to release it totally from top and bottom groove of the
mounts. (Fig 21-22)
Step 9
Fig 21 Fig 22
Product Code:
GRFFxxxH &GRFFxxxAT
• Keep the fabric from scratches.

Supplied parts
Lay each section of the frames on a tidy flat surface. (Fig 1)
Step 1
Unfold screen fabric and insert the tensioning bars into the fabric
grooves. (Fig 8-10)
Step 4
Align fixing lugs and the eyelets provided on the fabric. Using the
tensioning bar, pull fabric eyelets over the lugs. (Tip: Arrange horizontal
tensioning bars first then side tensioning bars). (Fig 11-15)
Step 5
Slide Fixing Lugs into grooves on the reverse side of frames.
(Fig 2 - 3)
Step 2
Insert both horizontal and vertical frame sections with the corner
stakes. Ensure all joints are square and then locko by
tightening with the screws provided. (Fig 4-7)
Step 3
Required (not supplied)
Electric Drill
Screw Driver Level 8 x Screws
to suit wall type
Horizontal Frame (x 2)&
Vertical Frame (x 2)
Fixing Lug
28 for 100”
30 for 115”
Side Tensioning
Bar (x 2)
Corner Brackets (x 4)
10mm Corner Screw
Horizontal Tensioning
Bar (x 2)
Mount (x 1)
Horizontal Frame
Vertical Frame
Fig 1
Fig 3Fig 2
Fixing Lug
Fig 4 Fig 5
Fig 6 Fig 7
Corner
Horizontal
Frame
Vertical
Frame
Fig 8
Fig 9 Fig 10
Fig 13
Fig 14
Fig 15
Fig 12
Fig 11