
Inserting or replacing the batteries
1. Open the battery compartment cover 9by turning it to the right in the direction
of Open and remove the cover.
2. Push back the battery compartment tab 11 and lift up the battery compartment
lid. (see Fig. B)
3. Insert 4 AA batteries into the battery compartment. Pay attention to the correct
battery polarity (+ or –) .
For battery replacement, remove the old batteries first.
4. Press down the battery compartment lid until you hear it click into position, then
replace the battery compartment cover and close the cover by turning it to the left
in the direction of Close.
Using the electric corkscrew
1. Use the foil cutter 7to remove any foil from the bottle before removing the cork.
To do so, place the foil cutter around the neck of the bottle and then rotate it while
pressing it gently.
2. Place the electric corkscrew 1on the top of the wine bottle, making sure that it
remains as upright as possible at all times. If you hold the electric corkscrew at an
angle to the bottle, the cork will not be removed properly.
3. Hold the electric corkscrew firmly and press and hold the cork removal button 3.
The corkscrew spiral 12 will rotate clockwise and enter the cork, and will then
gradually remove the cork from the bottle.
When the corkscrew stops, the cork has been fully removed from the bottle.
4. Release the cork removal button and lift the electric corkscrew away from the bottle.
5. Press and hold the cork ejection button 2to remove the cork from the corkscrew.
The corkscrew spiral will rotate anticlockwise to eject the cork.
6. Release the cork ejection button once the cork has come off the corkscrew spiral
and then return the electric corkscrew to the storage base 6.
B
C
l
o
s
e
O
p
e
n
C
l
o
s
e
O
p
e
n
11
Quick Start Guide