AMC MP 06S User manual

IMPORTANT SAFETY INSTRUCTIONS
When using this electronic device,
basic precautions should always be
taken, including the following:
1. Read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet
basement or near a swimming pool etc).
3. Use this device when you are sure thatplayer has a stable base and it is fixed securely.
4. This product, in combination with amplifier and loudspeakers may be capable of
producing sound levels that could cause permanent hearing loss. Do not operate for a
long period of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult with
otorhinolaryngologists. The product should be positioned so that proper ventilation is
maintained.
5. The product should be located away from heat sources such as radiators, heat vents, or
other devices (including amplifiers) that produce heat.
6. The product should be connected to a power supply that is described in the operating
instructions or are marked on the product. Replace the fuse only with one of the specified
type, size and correct rating.
7. The power supply cord should be undamaged and never share an outlet or extension cord
with other devices so that the outlet or extension cord's power rating is exceeded. Never
leave device plugged be left plugged in to the outlet when it’s not being used for a long
period of time.
8. Care should be taken so that objects do not fall into, and liquids would not be spilled
through, the enclosure's openings.
9. The product should be serviced by qualified service personnel if:
The power supply cord or the plug has been damaged.
Objects have fallen into or liquid has been spilled on the product.
The product has been exposed to rain.
The product has been dropped or the enclosure damaged.
10. There are some areas with high voltage inside, to reduce the risk of electric shock do not remove
cover of the player. The cover should be removed by the qualified personnel only. No user
serviceable parts inside.

CONTENTS:
Before you start
What's in the box 4
Hints on installation 4
Disc, flash disc formats 4
Controls and connections
Front panel 5
Rear panel 5
IR remote control 6
Batteries changing 6
Settings and functions
Tuner functions 7
CD/USB/SD functions 8
Specifications
General 11
Tuner section 11
CD/USB/SD section 11

What’s in the box
The accessories which are included in the box are:
Remote control
Instruction manual
Power cable
Hints on installation
Do…
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a table, shelf or stereo rack
Don’t…
Use in a place exposed to high temperatures or humidity, including near radiators and other
heat-generating appliances.
Place on a window sill or a place where the player will be exposed to direct sunlight.
Use in an excessively dusty or damp environment.
Place directly on top of an amplifier, or other component that becomes hot in use.
Use near television or monitor as you may experience interference-especially if the television
uses an indoor antenna.
Use in a kitchen or other room where the player may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth-this may prevent proper cooling of the unit.
Place on an unstable surface, or one that is not large enough to support all four of the unit’s
feet.
Do not use or store batteries in direct sunlight or other hot place, such as inside car or near
heater. This can cause batteries to leak, overheat ,explode or catch fire. It can also reduce the
life or performance of batteries.
Disc, flash disc formats
You can play following disc formats: CD, CD-R, CD-RW, it does support CDDA (CD
Text) as well as ISO 9660 CD-ROM’s. Compressed audio files are supported from
USB/SD drive as well as from CD.

Front Panel
1. Power ON/OFF switch
2. USB slot
3. CD/USB/SD Display
4. Folder skip button
5. Track skip button
6. Repeat
7. Program button
8. CD/USB/SD selector
9. Speed control
10. SD MMC slot
11. Tuner display
12. Station preset buttons
13. Add number 10 to radio stations
14. Jump through 10 radio stations
15. Memory button
16. CD slot
17. STOP button
18. PLAY/ PAUSE button
19. EJECT button
20. LED indicator for IR remote control
21. Station search button (down)
22. IR detector for IR remote control
23. LED indicator for IR remote control
24. Station search button (up)
Rear Panel
1. FM antenna input
2. Tuner audio output
3. Priority audio output
4. CD/USB/SD audio output
5. Power socket and AC fuse holder

IR remote control
1. IR remote buttons which are assigned to control
CD/USB/SD player only.
2. IR remote buttons which are assigned to control both
CD/USB/SD player and radio tuner. In white color are
marked functions for the CD/USB/SD player, in red –
functions for the radio tuner.
3. IR remote buttons which are assigned to control radio tuner
player only.
4. This function identifies which part of the player CD/USB/SD
or Radio tuner will be active.
Batteries changing
1. Open the battery cover.
2. Insert the 2*AAA batteries in accordance with marks
in the remote control battery compartment.
3. Close the battery cover

Tuner Functions
MEMORY
This function is designed for adding radio stations in the presets.
After pressing “Memory” button the preset number starts flashing. Set the preset number by using
number keys and press “Memory” to save the preset. At this moment the displayed frequency will be
memorized in the selected preset (from 1to 30). After 5 seconds of inactivity memory mode shuts
off automatically.
UP/DOWN
Auto tuning starts after pressing “UP” or “DOWN” button for more than 1,5 sec
When “UP” or “DOWN”button is pressed for a short time manual search mode is activated,
Every time when “UP” button is pressed, the FM frequency is increased by 50kHz. Every time when
“DOWN” button is pressed, the FM frequency is decreased by 50kHz.
M-DOWN / M-UP
Press M-DOWN or M-UP buttons in order to scroll through radio stations which are recorder in
presets.
+10/--
This key jumps 10 steps through the preset station list. For example: If preset 2 is selected, after
pressing +10/-- button preset No. 12 will be selected. if +10/-- button will by pressed one more
time preset No. 22 will be selected. Press this button more than 1,5 second ant the station number
can be added using the numbers‘ key.
10/0
To jump between the 1 and 10 presets stations press “10/0” button.
SLEEP
The radio tuner automatically turns off after terminated time if the sleep mode is active. The sleep
time begins from 90 seconds and changes cyclically 90 →80 →70 →60 →50 →40 →30 →20
→10 →OFF with every push the SLEEP key when the sleep time is in the display.
AMS
This is auto searches function. Press “AMS” button more than 1,5 seconds and the tuner
automatically finds all available radio stations and stores it in the presets.
DIRECT
This function allows to set radio stations frequency by using the number buttons. Press this button
once, then use the number buttons to input the station frequency, again press “DIRECT” key to
confirm the frequency and the tuner will jump to this station. If the input frequency is beyond the
range, the tuner will display “ERROR”.
RDS
This key is useful to change RDS functions*cyclically PS →PTY →RT →CT
PS – program service (call letters or station identity name will displayed)
PTY - program type (allows easily to find similar program by genre News, Drama, Rock music…)
RT - radio text (textual information, usually title and artist of the currently playing song)
CT - clock time
_______________________________________________________________________________
RDS functions* - the RDS information and functions depend from radio station broadcasting.

MUTE
Press “Mute” button to mute audio output, to disable mute press“Mute” again.
MO/ST
Press “MO/ST” button to set mono or stereo mode for the radio tuner.
ME/UP
This function allows jump to the next radio station of the radio station presets.
ME/DOWN
This function allows jump to the previous radio station of the radio station presets.
CD/TUNER
This function together with “CD” and “TUNER” LED identifies which part of the player
CD/USB/SD or FM tuner is ready to receive IR remote control commands.
CD/USB/SD Functions
PLAY/PAUSE
By pressing this key when CD is stopped, play starts after track search.
When this key is pressed during playing the CD mode is changed in to pause.
When this key is pressed during CD is paused, it switches back to play mode.
STOP
Stops CD USB CD player.
FUNCT
This button is designed for audio source selection. (CD/USB/SD)
CUE
In stop mode this key changes starting track (file) in ascending order, and automatically goes to first
track if it is in the last track.
Single pressed in play mode or program mode changes to next track, in random mode skips to
random track.
By pressing longer than 0,7 sec. switches to fast forward mode.
REV
In stop mode this key changes starting track (file) in descending order, and automatically goes to
the last track if it is in first track.
Single pressed in play mode or program mode changes to previous track (file).
By pressing longer than 0,7 sec switches to fast reverse mode.

FOLDER >>
In stop mode this key skips the starting play folder to next folder, and automatically switches to first folder if
current folder is last. In the program entry mode this key switches to next folder’s first file, if the folder is last it
switches to first folder. In normal play mode this key skips the playing file and switches to next folder’s first
file.
FOLDER <<
In stop mode this key skips the starting play folder to next previous, and automatically switches to last folder
if current folder is first. In the program entry mode this key switches to previous folder’s first file, if the folder is
first it switches to last folder. In normal play mode this key skips the playing file and switches to previous
folder’s first file.
REPEAT
This key switches PLAY mode like shown below:
A-B
While audio file is playing push A-B key ones to add a first repeat point in the track and press one
more time to enter second repeating point. The payer repeats track between these points till cancel
this function.
PLAY 1
By pressing this key once, the player will play until the end of track and stops. Pressing the key again
the function will be cancelled and the LCD will indicate OFF.
DISPLAY
This key allows change information on LCD in this order:
SPEED - / SPEED +
This function allows adjust playing speed when audio plays from CD, USB or SD. Use “SPEED –“ key
to slow down music or “SPEED +” to speeds up the music.
RESET
This key resets playing speed to normal. In order to reset speed without the remote control, press
“SPEED” knob located in front panel.
EJECT
By pushing this key CD is ejected.
PROG
This key is used for programming.
All program is cleared when STOP key is pushed in the programming mode.

PRIORITY OUTPUT
Priority output incorporates signal from CD USB SD payer and FM tuner. If music from CD, USB or SD
stops playing audio signal from the FM tuner automatically appears on this output.
CD USB SD OUTPUT
This is stereo audio output from CD USB SD player.
TUNER OUTPUT
This is stereo audio output from FM tuner.
POWER SOCKET AND AC FUSE HOLDER
This connector is designed to connect main power to the music player. Connector is combined with
fuse holder. Please use T630mA, 250V fuse only.
Contact with qualified service if fuse blows up constantly!
Disconnect main power cable before replacing fuse!

SPECIFICATIONS
GENERAL
1. FM tuner
2. CD/USB/SD player with compressed audio files support.
3. 30 preset for FM station memory.
4. CD with mechanical and electronic anti-shock, CD, CD-R, CD-R/W, USB, SD/MMC available.
5. Input: FM 75 ohm unbalanced antenna
terminal.
USB port, SD/MMC port.
6. Output: Stereo RCA output for FM tuner
and CD/USB/SD player.
7. Power supply : 230V AC 50Hz
8. Power consumption: 50 VA
9. Weight: 3,8kg
10. Dimension: 482mm x 44mm x 250mm
TUNER SECTION
1. Output level: -5 dBu
2. Tuning Frequency range 87,5 – 108 MHz
3. Sensitivity 10 μV
4. S/N ratio 55 dB
5. Image rejection 45 dB
6. THD 0,1 %
7. Audio channel separation 35 dB
CD SECTION
1. Output level: +4dBu (± 2dBu)
2. Output level difference between channels 2dB
3. Frequency response 20 Hz 20 KHz
4. Audio channel separation @ 1 KHz 60 dB
5. THD 0,1 %
6. S/N ration 70 dB

AMC is a registered trademark of AMC Baltic www.amcpro.eu