AMC MP02 User manual

IMPORTANT SAFETY INSTRUCTIONS
When using this electronic device,
basic precautions should always be
taken, including the following:
1. Read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a
wet basement or near a swimming pool etc).
3. Use this device when you are sure that player has a stable base and it is fixed securely.
4. This product, in combination with amplifier and loudspeakers may be capable of
producing sound levels that could cause permanent hearing loss. Do not operate for a
long period of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult with
otorhinolaryngologists. The product should be positioned so that proper ventilation is
maintained.
5. The product should be located away from heat sources such as radiators, heat vents, or
other devices (including amplifiers) that produce heat.
6. The product should be connected to a power supply that is described in the operating
instructions or are marked on the product. Replace the fuse only with one of the
specified type, size and correct rating.
7. The power supply cord should be undamaged and never share an outlet or extension
cord with other devices so that the outlet or extension cord's power rating is exceeded.
Never leave device plugged in to the outlet when it is not being used for a long period
of time.
8. Care should be taken so that objects do not fall into, and liquids would not be spilled
through, the enclosure's openings.
9. The product should be serviced by qualified service personnel if:
The power supply cord or the plug has been damaged.
Objects have fallen into or liquid has been spilled on the product.
The product has been exposed to rain.
The product has been dropped or the enclosure damaged.
10. There are some areas with high voltage inside, to reduce the risk of electric shock do not
remove cover of the player. The cover should be removed by the qualified personnel only.
No user serviceable parts inside.

CONTENTS:
Before you start
What's in the box 4
Hints on installation 4
Controls and connections
Front panel 5
Rear panel 5
IR remote control 6
Batteries changing 6
Settings and functions
Tuner functions 7
Bluetooth functions 8
CD/USB/SD functions 9
Specifications
General 12
Tuner section/Bluetooth 12
CD/USB/SD section 12

What’s in the box
The accessories which are included in the box are:
Remote control
Instruction manual
Power cable
Hints on installation
Do…
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
Don’t…
Use in a place exposed to high temperatures or humidity, including near radiators and other
heat-generating appliances.
Place on a window sill or a place where the player will be exposed to direct sunlight.
Use in an excessively dusty or damp environment.
Place directly on top of an amplifier, or other component that becomes hot in use.
Use near television or monitor as you may experience interference-especially if the television
uses an indoor antenna.
Use in a kitchen or other room where the player may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth-this may prevent proper cooling of the unit.
Place on an unstable surface, or one that is not large enough to support all four of the unit’s
feet.
Do not use or store batteries in direct sunlight or other hot place, such as inside car or near
heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the
life or performance of batteries.

Front Panel
1. Power ON/OFF switch
2. LCD Display
3. Repeat
4. Folder skip button
5. Folder skip button
6. A-B repeat button
7. Mute
8. Music source selector CD/USB/SD
9. SD/MMC slot
10. LCD display
11. Jump through 5 radio station
12. MEMORY
13. Station search button
14. Station search button
15. Music scourge selector CD/TUNER/BT
16. Track skip button
17. Track skip button
18. USB slot
19. CD slot
20. Program button
21. Track skip button
22. Track skip button
23. Stop button
24. Play/pause button
25. CD eject button
26. IR detector
27. Station preset button 1
28. Station preset button 2
29. Station preset button 3
30. Station preset button 4
31. Station preset button 5
32. PAIR button
33. Bluetooth antenna and indicators
34. Play/pause
Rear Panel
1. FM antenna input
2. Audio output
3. Mains input socket
4. AC fuse holder

IR remote control
1. IR remote buttons which are assigned to control
CD/USB/SD player only.
2. IR remote buttons which are assigned to control both
CD/USB/SD player and radio tuner. In white color are
markered functions for the CD/USB/SD player, in red –
functions for the radio tuner.
3. IR remote buttons which are assigned to control radio tuner
player only.
4. This function identifies which part of the player CD/USB/SD
or Radio tuner will be sensitive to IR remote control. Selected
part is indicated by green color LED on the front panel.
Batteries changing
1. Open the battery cover.
2. Insert the 2*AAA batteries in accordance with marks
in the remote control battery compartment.
3. Close the battery cover

Tuner Functions
MEMORY
This function is designed for adding radio stations in the presets.
Radio tuner is turned on:
Select the radio station frequency by using “TUNE -” or “TUNE +” buttons. After pressing “Memory”
button the preset number starts flashing. Set the preset number by using number keys and press
“Memory” to save the preset. At this moment the displayed frequency will be memorized in the
selected preset (from 1to 10). After 5 seconds of inactivity memory mode shuts off automatically.
-TUNE +
Auto tuning starts after pressing “TUNE -” or “TUNE +” button more than 1,5 sec
When “TUNE -” or “TUNE +”button is pressed for a short time manual search mode is activated,
Every time when “TUNE -” button is pressed in manual mode the FM frequency is increased by
50kHz. Every time when “TUNE +”button is pressed, the FM frequency is decreased by 50kHz.
+5
This key jumps 5 steps through the preset station list. For example, if preset 2 is selected, after
pressing +5 button preset No. 7 will be selected.
+10/--
This key jumps 10 steps through the preset station list. For example. If preset 2 is selected, after
pressing +10/-- button preset No. 12 will be selected. if +10/-- button will by pressed one more
time preset No. 22 will be selected. Press this button more than 1,5 second ant the station number
can be added using the numbers‘ key.
10/0
To jump between the 1 and 10 presets stations press “10/0” button.
SLEEP
The radio tuner automatically turns off after terminated time if the sleep mode is active. The sleep
time begins from 90 seconds and changes cyclically 90 →80 →70 →60 →50 →40 →30 →20
→10 →OFF with every pushing the SLEEP key when the sleep time is in the display.
AMS
This an auto search for radio stations function. Press “AMS” button more than 1,5 seconds and the
tuner will search the radio station and store in memory automatically.
DIRECT
This function allows to set radio stations frequency by using the number buttons. Press this button
once, then use the number buttons to input the station frequency, again press “DIRECT” key to
confirm the frequency and the tuner will jump to this station. If the input frequency is beyond the
range, the tuner will display ERR.
RDS
This key is useful to change RDS functions*cyclically PS →PTY →RT →CT
PS – program service (call letters or station identity name will displayed)
PTY - program type (allows easily to find similar program by genre News, Drama, Rock music…)
RT - radio text (textual information, usually title and artist of the currently playing song)
CT - clock time
_______________________________________________________________________________
RDS functions* - the RDS information and functions depend from radio station broadcasting.

MUTE
Press “Mute” button to mute audio output, to disable mute press“Mute” again.
MO/ST
Press “MO/ST” button to set mono or stereo mode for the radio tuner.
ME/UP
This function allows to jump to the next radio station of the radio station presets.
ME/DOWN
This function allows to jump to the previous radio station of the radio station presets.
CD/TUNER/BT
This function switch, which part of the player CD/USB/SD, Radio tuner or Bluetooth player will
be active. Selected part is indicated by green color LED on the front panel or active LCD display.
STATION PRESET BUTTONS
These buttons allows quickly find your favorite radio station if radio station was saved in the
preset.
BT LED INDICATOR
BT LED indicates if Bluetooth player if selected as music source.
CD/TUNER/BT
This button is designed for select audio scourge CD, TUNER or Bluetooth player.
Bluetooth Functions
PAIR
After pressing this key more than 3s, the module will cancel the present matching Bluetooth
device and wait for marching other device. At this moment PAIR LED indicator starts blinking in 0,5s
period.
PAIR LED INDICATOR
When the LED is blinking with 0,25s period, the Bluetooth module is searching for the last
matched device and matches it automatically. When the LED is blinking with 0,5s period, the Bluetooth
module is waiting for marching some device. When marching is successful, the LED will be turned off.
PLAY/PAUSE
By pressing this key when Bluetooth player is stopped, play starts after track search. When this
key is pressed during the playing, the Bluetooth player mode is changed in to pause. When this key is
pressed during the pause, it switches back to play mode.
<< / >>
In play mode after playing time exceed 5sec, “<<” button starts track from the beginning, if the
“>>” key is pressed the music skip to forward track.

Important for iOS users: If error message “Connection Unsuccessful” appears on the screen after
Bluetooth devices was paired, please select “Forget this device” from iOS menu and then, repeat the
connection process again.
“Connection Unsuccessful”error message “Forget this device”menu screen
CD/USB/SD Functions
PLAY/PAUSE
By pressing this key when CD is stopped, play starts after track search.
When this key is pressed during playing the CD mode is changed in to pause.
When this key is pressed during CD is paused, it switches back to play mode
STOP
When CD is playing or is in pause mode, by pressing this key it stops.
FUNC
This button is designed for audio source selection (CD/USB/CARD). Function is active, if CD module
is selected by using CD/TUNER/BT button.
A - B
This function is for repeat the selected place in the sound track. When sound track is playing press
this button one time to set start point and press second time to set end point. For the stopping "A -
B" repeat, press "A – B" button one more time.
CUE
In stop mode this key changes starting track (file) in ascending order, and automatically goes to first
track if it is in the last track.
Single pressed in play mode or program mode changes to next track, in random mode skips to
random track.
By pressing longer than 0,7 sec. switches to fast forward mode.

REV
In stop mode this key changes starting track (file) in descending order, and automatically goes to
the last track if it is in first track.
Single pressed in play mode or program mode changes to previous track (file).
By pressing longer than 0,7 sec switches to fast reverse mode.
FOLDER >>
In stop mode this key skips the starting play folder to next folder, and automatically switches to first folder if
current folder is last.
In the program entry mode this key switches to next folder’s first file, if the folder is last it switches to first
folder.
In normal play mode this key skips the playing file and switches to next folder’s first file.
FOLDER <<
In stop mode this key skips the starting play folder to next previous, and automatically switches to last folder
if current folder is first.
In the program entry mode this key switches to previous folder’s first file, if the folder is first it switches to last
folder.
In normal play mode this key skips the playing file and switches to previous folder’s first file.
REPEAT
In USB/SD mode, when pushing the key PLAY mode switches like shown below:
While pushing the key in CD mode, PLAY mode is changed in this order:
EJECT
By pushing this key CD is ejected.
PROG
This key is used for programming.
All program is cleared when STOP key is pushed in the programming mode.
MUTE
When this key is pushed during CD/USB/SD is playing, the sound in the output is muted. Pressed
again the sound is turned on again.
IR DETECTOR
This is IR detector for receiving the instructions from the remote control. All obstacles between the
IR detector and remote control reduce the remote control reliability.
ON/OFF switch.
Turns on and off the device.

SD MMC card’s slot
This slot is designed for SD and MMC cards. Please note that maximum supported capacity of card is
up to 32GB.
USB flash’s slot
This slot is designed for USB flash disc and it can support up to 32GB capacity.
LCD display
Displays the main information from the Tuner, Bluetooth and CD player.
CD slot
CD drive for the play music from compact disc.

SPECIFICATIONS
GENERAL
1. FM tuner
2. Bluetooth player
3. CD/USB/SD player with compressed audio files support.
4. CD with mechanical and electronic anti-shock, CD, CD-R, CD-R/W, USB, SD/MMC available.
5. Input: FM 75 ohm unbalanced antenna
terminal.
USB port, SD/MMC port.
6. Output: Stereo RCA output for FM tuner
and CD/USB/SD player.
7. Power supply : 230V AC 50Hz
8. Power consumption: 50 VA
9. Weight: 3,8kg
10. Dimension: 482mm x 44mm x 250mm
TUNER SECTION
1. Output level: -5 dBu
2. Tuning Frequency range 87,5 – 108 MHz
3. Sensitivity 10 μV
4. S/N ratio 55 dB
5. Image rejection 45 dB
6. THD 0,1 %
7. Audio channel separation 35 dB
CD SECTION
1. Output level: +4dBu (± 2dBu)
2. Output level difference between channels 2dB
3. Frequency response 20 Hz 20 KHz
4. Audio channel separation @ 1 KHz 60 dB
5. THD 0,1 %
6. S/N ration 70 dB
AMC is a registered trademark of AMC Baltic www.amcpro.eu