AME BARITRAP 750 User manual

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 1
e BARITRAP 750 bariatric free
standing trapeze is a oor mounted
devices that allows patients to
reposition themselves in bed.
Total Height 69.5 “
Total Width 32.5”
Total Depth 58”
Width Between Legs 28.5”
Boom Length 40”
Product Weight 97 lb.
Shipping Weight 110 lbs.
Weight Capacity 750 lbs.
TECHNICAL SPECIFICATIONS
BARITRAP 750 FREESTANDING TRAPEZE

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 2
DEVICE DESCRIPTION AND PARTS
TRAPEZE PACKAGE CONTENTS:
(2) Main Frame Legs
(1) Mid-Section
(1) Boom
(1) Bar and Handle
(12) ½” Bolts and Washers
(4) 6” Bolts, Washers and Lock Nuts (4) End Caps to go over Lock
Nuts
REQUIRED TOOLS FOR ASSEMBLY:
7/32 Hex Key
9/16 Wrench
Prior to installation, verify that all package contents have been
received in good condition. If components are damaged or missing,
contact us immediately.
DO NOT use substitute parts or assemble the while missing parts.
As you read through this be aware of the four
signal terms below:
DANGER
Information that appears under the DANGER description concerns the protection of personnel
from direct and pending hazards that, if not avoided, will result in immediate, serious personal
injury or death in addition to damage of the equipment.
WARNING
Information that appears under the WARNING description concerns the protection of personnel
from possible hazards that can result in injury or death in addition to damage of the equipment
CAUTION
Information that appears under the CAUTION description concerns the protection of personnel
from possible hazards that may result in minor injury or damage of the equipment
NOTE
Information that appears under the NOTE description gives added information, which helps in
understanding the item being described.
CLEANING
e trapeze frame should be cleaned
periodically using a mild detergent and
water. Be sure to completely dry the
trapeze frame before use. When washing
the trapeze straps, use only mild detergent
and water. DO NOT USE BLEACH.
Allow straps to completely air-dry before
use. Do not place straps in dryer.
On a quarterly basis, all hardware on the
trapeze should be checked and tightened,
the frame should be inspected to check
for wear or damage, and the strap should
be inspected for wear or damage.

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 3
ASSEMBLY & DIRECTIONS FOR USE
STEP 1
Clear a work space and remove all contents from
shipping box. You can use the top of the box to
place unwrapped items in.
STEP 2
Place trapeze legs on the oor. Make sure foot pads
are on the oor. Next, attach the mid-section on the
posts coming up from the trapeze legs.

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 4
STEP 3
Use the (12) ½” hex bolts and washers to attach
the mid-section to the trapeze legs.
STEP 4
Use the (4) 6” hex bolts, washers and lock nuts to
attach the trapeze boom to the mid-section.
ASSEMBLY & DIRECTIONS FOR USE

861 Taylor Rd., Suite “I”
Columbus, Ohio 43230
www.ame-medical.com
Phone: [phone]
Fax: [phone]
[email protected]
PAGE 5
STEP 5
Check to ensure that all bolts are tightened and
secure. Not doing so may result in injury to the
patient/resident or sta.
STEP 6
Attach the trapeze handle to an appropriate spot
for the resident.
YOU HAVE NOW COMPLETED THE ASSEMBLY
OF YOUR MEDICAL BARIATRIC FREE-STAND-
ING TRAPEZE. Be sure to double-check all bolts and
part placements on the trapeze. Also, be sure to remove
all packaging materials from the area before allowing
residents into the area.
Prior to use, be sure to read and refer to the full Own-
er’s Manual for additional warnings. ALWAYS test this
devise prior to each use.
ASSEMBLY & DIRECTIONS FOR USE