American DJ Crank 2 User manual

CRANK 2 SYSTEM™
American DJ ®User Instructions
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058
Portable Trussing System
CRANK 2 SYSTEM™ PARTS LIST:
2 x 10ʼ Tri-Pod Stands
4 x I-Beam Knobs w/ Wing Nuts
6 x Side Mount T-Connectors
2 x I-Beam Connectors
4 x Truss/T-Connector Locking Clip
1 x Center “I” Support bar
2 x 5ʼ Truss I-Beam
4 x Safety Pins
Part#: Z-CRANK2-IB/K
& Z-CRANK2/WN
Part#: LTS/T
Part#: Z-IBEAM/C
Part#: Z-CRANK2/IC
Part#: Z-CRANK2/IC-NH
Part#: Z-CRANK2/TRIPOD
Part#: Z-CRANK2/IB
Part#: Z-LTS/SP

Center “I” Support Bar with T-Connectors Assembled
T-Connector T-Connector/Truss Locking Clip Truss
Crank 2 System Assembly Instructions
Affordable Quality Lighting Products from American DJ® Los Angeles, CA. 90058
5’ Truss I-Beam
After T-Connector, Locking Clip,
and Truss are connected. This is
what it should look like.
Middle of Crank 2 System
I-Beam Connector
Center “I” Support Bar
5’ Truss I-Beam