American Dryer Corp. CG20 User manual

SL20/CG20 Parts Manual
Phase 7
COIN & NON-COIN (OPL)
ADCPartNo.450222
AmericanDryerCorporation
88Currant Road
FallRiver,MA02720-4781
Telephone: [phone] / Fax: [phone]
E-mail:[e-mail]
www.amdry.com

Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OFPURCHASE ____________________________ MODELNO. __________________________________________
RESELLER’SNAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADCfactory. Whenordering replacement parts from thefactory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Pleasespecify the dryermodel numberand serialnumberin addition to thedescriptionand partnumber,so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANTNOTETOPURCHASER”
Informationmustbeobtainedfromyourlocalgassupplierontheinstructions
tobefollowedifthe user smells gas. Theseinstructionsmustbeposted in a
prominentlocationnearthedryer.
FORYOUR SAFETY
Donot store or use gasolineor
otherflammablevaporsand
liquidsinthevicinityofthisor
anyotherappliance.
POURVOTRESÉCURITÉ
Nepasentreposer ni utiliser d’essence
nid’autresvapeursou liquides
inflammablesàproximitédecet
appareiloude tout autreappareil.

Table of Contents
Phase7 OPLTop PanelAssembly
ForTopControl Models..................................................................................................................... 2
Phase7CoinTopPanelAssembly
ForTopControl Models..................................................................................................................... 3
Phase7TopPanelAssembly
ForBottomControl Models ............................................................................................................... 4
FrontBottomPanelAssembly ................................................................................................................. 5
MainDoorAssemblies............................................................................................................................ 6
MiddleFrontPanelAssembly ................................................................................................................. 7
LintDrawerAssembly ............................................................................................................................ 8
Basket(Tumbler)Assembly .................................................................................................................... 9
FrontBasket(Tumbler)/SupportPanelAssembly................................................................................... 10
RearSupportPanelAssembly ............................................................................................................... 11
Basket(Tumbler)RollerWheelAssemblies ........................................................................................... 12
S.A.F.E.SystemPipingAssembly ......................................................................................................... 13
TemperatureSensorAssemblies ............................................................................................................ 14
MotorDriveAssembly.......................................................................................................................... 15
DirectSparkIgnition(DSI) BurnerAssembly .................................................................................. 16, 17
ElectricOvenAssembly ........................................................................................................................ 18
LintBox/BlowerMotorAssembly ......................................................................................................... 19
BlowerAssembly ................................................................................................................................. 20
BlowerMotorAssembly ....................................................................................................................... 21
RearElectricalPanelAssembly
ForGas ModelsOnly ..................................................................................................................... 22
RearElectricalPanelAssembly
ForElectricModelsOnly................................................................................................................ 23
HeatDuctAssembly ............................................................................................................................. 24
SailSwitchAssembly ............................................................................................................................ 25
Base/Top/Sides/BackGuardAssemblies ............................................................................................... 26
PedestalBoxOption............................................................................................................................. 27
AdditionalPartsAvailable ..................................................................................................................... 28

2Phase 7 OPL Top Panel Assembly
Illus. No. Part No. Qty.Description
1 112579 1 Phase 7 Keyboard
2 137250 1 Phase 7 Ribbon Cable
3 137270 1 16” x 1” Large Character Display
4 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
5 153010 4 #6 Star Washer
6 883434 1 Phase 7 Board with Sensor Activated Fire Extinguishing (S.A.F.E.) System
7 818173 1 SL-20 Black Control Panel
818196 1 CG-20 Black Control Panel
8 153603 8 Snap Top Standoff
9 -------* 1 Logo ONLY
10 818206 1 Magnetic SwitchAssembly
* Contact reseller for logo.
ForTopControlModels

3
Phase 7 Coin Top Panel Assembly
ForTop ControlModels
Illus. No. Part No. Qty.Description
1 137270 1 16” x 1” Large Character Display
2 152015 4 8-32 Hex Nut
3 153010 4 #6 Internal and External Star Washer Zinc
4 150005 4 6-32 x 1/4” Phillips Round Head Machine Screw
5 112579 1 Phase 7 Keypad
6 137250 1 Phase 7 Ribbon Cable
7 887007 1 Phase 7 Coin Board (without S.A.F.E.)
887009 1 Phase 7 Coin Board (with S.A.F.E.)
8 152016 5 4-40 1/4” Hex Nut
9 153045 5 4 Split Lock Washer
10 883783 1 $0.25 US Coin Acceptor
883784 1 $0.25 Canadian Coin Acceptor
883785 1 0.880 x 0.062 Token Optic CoinAcceptor
883786 1 0.880 x 0.07 Token Optic CoinAcceptor
883787 1 100 Yen Optic Coin Acceptor
11 818181 1 Upper Control Panel (Black)
12 818132 1 CoinVault
13 318538 1 Faceplate for US Coin
14 818206 1 Magnetic Switch
15 883774 1 Optic Switch

4Phase 7 Top Panel Assembly
ForBottom ControlModels
Illus. No. Part No. Qty.Description
1 818431 1 SL-20 Black Control Panel
2 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
3 153010 4 #6 Star Washer
4 887009 1 Phase 7 Board with Sensor Activated Fire Extinguishing (S.A.F.E.) System
5 153603 4 Snap Top Standoff
6 818206 1 Magnetic SwitchAssembly
7 -------* 1 Logo ONLY
* Contact reseller for logo.

5
Front Bottom Panel Assembly
Illus. No. Part No. Qty.Description
1 818165* 1 Front Bottom PanelAssembly
* Specify color when ordering.

6Main Door Assemblies
Illus. No. Part No. Qty.Description
1 883824 1 Door Pan with Glass
2 883823 1 Door (left hinge)
(includes illus. nos. 2, 13 and 14)
883825 1 Door (right hinge)
(includes illus. nos. 2, 13 and 14)
3 102313 1 Door Gasket (fiberglass)
4 151016 4 #8-32 Acorn Nut
5 150322 8 #6 x 1/2” Self-Drilling Screw
6 102314 1 Door Gasket (rubber)
7 153000 4 #8 Flat Washer
8 153012 4 #8 Star Washer
9 150327 2 #6 x 1/2” Phillips Flat Head Screw
10 170230 1 Door Handle
11 103079 2 Door Hinge
12 150328 2 1/4-20 x 1” Stainless Steel Phillips Head Screw
13 102384 2 Rubber Bumper
14 170608 1 Magnet
818159 1 DoorAssembly Complete (left hinge)
(includes illus. nos. 1 through 14)
818178 1 DoorAssembly Complete (right hinge)
(includes illus. nos. 1 through 14)
401010 1 Adhesive for Item (6) Door Gasket (5 oz. tube)...Not Illustrated

7
Middle Front Panel Assembly
Illus. No. Part No. Qty.Description
1 150322 32 #6 x 1/2” Self-Drilling Screw
2 318146 2 Door Catch Holder
3 818104 1 Middle Front PanelAssembly Complete (specify left or right hinged)
(includes illus. nos. 1 through 9)
4 318249 1 Door Catch Cover
5 150531 1 #6 x 1-1/4” Phillips Pan Sheet Metal Screw
6 170228 1 Door Catch
7 150399 4 #8 x 1/2” Phillips Self-Drilling Screw (for models without hinge studs)
8 150301 4 #8 x 7/16” Phillips Pan Head TEK Screw
9 150329 2 #4 x -3/8 Phillips Pan Head Machine Screw
10 151016 4 #8 Acorn Nut (for models with hinge studs)
11 153000 4 #8 Flat Washer (for models with hinge studs)
12 153012 4 #8 Star Washer (for models with hinge studs)

8
Illus. No. Part No. Qty.Description
1 883751 1 Lint Drawer Handle
(includes illus. nos. 1 through 5)
2 151010 2 #10-32 Hex Acorn Lock Nut
3 153420 2 #10 Split Lock Washer
4 318541 2 Offset Washer
5 117605 2 Gasket (sold by the foot)
6 883752 1 Lint Drawer Assembly
(includes illus. nos. 6 and 7)
7 116054 1 Lint Drawer Felt
818166 1 Lint Draw Complete with Handle
(includes illus. nos. 1 through 7)
LintDrawerAssembly

9
Basket(Tumbler)Assembly
Illus. No. Part No. Qty.Description
1 884359 1 Open Back Tumbler Assembly
884363 1 Solid Back TumblerAssembly
(as of May 2004)
(includes illus. nos. 1 through 8)
2 318242 3 5” Tapered Rib
3 150313 12 #10-16 x 1/2” TORX Screw
4 154217 1 1/8” x 1/2” Pop Rivet
5 102102 1 Rotational Sensor Magnet
401010 1 Adhesive for Felt Collar (5 oz. tube)
6 115906 2 Basket (tumbler) Felt

10
Illus. No. Part No. Qty.Description
1 883820 1 Front Basket (tumbler) Support Panel Complete
2 818110 1 Front RightWheelAssembly
(refer to Basket [Tumbler] Roller Wheel Assemblies on page 12)
3 818109 1 Front Left Wheel Assembly
(refer to Basket [Tumbler] Roller Wheel Assemblies on page 12)
4 121400 1 Universal Bushing
Front Basket (Tumbler)/Support Panel Assembly

11
Rear Support Panel Assembly
Illus. No. Part No. Qty.Description
1 818207 1 Temperature Sensor Probe Assembly
(refer to Temperature Sensor Assemblies on page 14)
2 318252 1 Rear Temperature Probe Mount
3 318234 1 Rotational Sensor Switch Bracket
4 152015 2 #8-32 Hex Nut
5 153000 2 #8 Flat Washer
6 153012 2 #8 Star Washer
7 153009 9 #10 Star Washer
8 152008 9 #10-32 Hex Nut
9 154200 12 5/32” x 5/16” Pop Rivet
10 154007 2 1/4” Push On Fastener
11 318342 1 Rear Basket (tumbler) Support Panel
12 122325 1 Magnetic Rotational Sensor Switch
13 150300 8 #10-16 x 1/2” Hex Washer TEK Screw
14 818109 1 Rear Right Roller WheelAssembly
(refer to Basket [Tumbler] Roller Wheel Assemblies on page 12)
15 818110 1 Rear Left Roller Wheel Assembly
(refer to Basket [Tumbler] Roller Wheel Assemblies on page 12)
16 818145 1 Rear BulkheadAssembly with SensorActivated Fire Extinguishing
(S.A.F.E.) System Piping Assembly
(refer to S.A.F.E. System Piping Assembly on page 13)
818111 1 Rear Bulkhead without SensorActivated Fire Extinguishing (S.A.F.E.)
System
17 156001 1 Caterpillar Grommet

12 Basket(Tumbler) Roller WheelAssemblies
Illus. No. Part No. Qty.Description
1 150510 3 1/4-20 x 3/4” Hex Head Machine Bolt
2 154267 1 M10 x 25mm Shoulder Screw
3 153007 3 1/4” Split Lock Washer
4 153002 1 5/16” Split Lock Washer
5 154013 1 M8 Hex Nut
6 154284 1 Basket (tumbler) Wheel Spacer
7 318232 1 Rear Left/Front Right Roller Wheel Bracket
818110 1 Rear Left/Front Right WheelAssembly Complete
(includes illus. nos. 1 through 10)
318233 1 Rear Right/Front Left Roller Wheel Bracket
818109 1 Rear Right/Front Left WheelAssembly Complete
(includes illus. nos. 1 through 10)
8 153596 3 1/4-20 Clinch Nut
9 153018 3 1/4” Flat Washer
10 180032 1 Idler Wheel

13
S.A.F.E.SystemPipingAssembly
Illus. No. Part No. Qty.Description
1 143581 1 3 GPM 3/8” N.P.T. Spray Nozzle
2 318167 1 Nozzle Bracket
3 143220 2 3/8” F.P.T. Brass Tee
4 143242 1 3/8” x 2-1/2” Brass Nipple
5 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connector
6 143155 3 3/4” Brass Street Elbow
7 143315 1 3/8” M.P.T. x 1/8” Brass Bushing
8 136987 1 Water Jet Pressure Switch
9 165114 1 SolenoidValve
10 143251 1 3/8” M.P.T. Brass Plug
11 142888 1 1/2” M.P.T. x 3/8” F.P.T. Hex Bushing
12 143099 1 3/8” OD Copper Tube
13 143303 1 3/8” N.P.T. Brass Lock Nut
14 818139 1 Rear BulkheadAssembly for SensorActivated Fire Extinguishing (S.A.F.E.)
System ONLY
818199 1 SensorActivated Fire Extinguishing (S.A.F.E.) System PipingAssembly
(includes illus. nos. 1 through 15)
15 824081 1 R.C. Network with Terminals
16 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
17 152008 2 #10 Nut
18 152034 2 #10 Split Lock Washer

14 TemperatureSensorAssemblies
Illus. No. Part No. Qty.Description
1 818207 2 Basket (tumbler) Temperature Sensor Probe
(includes illus. nos. 1 through 3)
2 122646 1 2-Pin Plug
3 122706 2 Socket Terminal ONLY
4 883821 1 Sensor Activated Fire Extinguishing (S.A.F.E.) System Temperature Sensor
ProbeAssembly Complete
(includes illus. nos. 4 through 8)
5 122646 1 2-Pin Plug
6 122706 2 Socket Terminal ONLY
7 318525 1 Sensor Activated Fire Extinguishing (S.A.F.E.) System Probe Bracket
8 154007 2 Push On Fasteners

15
MotorDriveAssembly
Illus. No. Part No. Qty.Description
1 154279 4 5/16-18 x 3/4” Carriage Bolt (for motor bases without studs)
2 153002 4 5/16” Split Lock Washer
3 154321 1 5/16” x 3/8” Allen Setscrew
4 152004 4 5/16-18 Hex Nut
5 153001 4 5/16” Flat Washer
6 181120 1 4-Pole Motor (for earlier models without studs)
7 318247 1 4-Pole Motor Sheave (60 Hz models)
318248 1 4-Pole Motor Sheave (50 Hz models)
8 318548 1 Motor Base
9 100197 1 Drive Belt
818121 1 Drive MotorAssembly 60 Hz
(includes illus. nos. 1 through 8)
818126 1 Drive MotorAssembly 50 Hz
(includes illus. nos. 1 through 8)
10 818200 1 Motor Base Plate (for later models with studs)

16 Direct Spark Ignition (DSI) Burner Assembly

17
Direct Spark Ignition (DSI) Burner Assembly
Illus. No. Part No. Qty.Description
1 143226 1 1/2” Brass Street Elbow
2 141317 1 1/2” Bronze Union Elbow
3 882451 1 Ignitor ProbeAssembly with High Voltage (HV) Wire
(includes illus. nos. 3 and 16)
4 128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve
880960 1 1/2” 24 VAC Redundant (liquid propane) Gas Valve
5 140868 1 #31 Burner Orifice (natural gas) ONLY (40K BTU Burners)
140870 1 #34 Burner Orifice (natural gas) ONLY (35K BTU Burners)
140869 1 #49 Burner Orifice (liquid propane [L.P.] gas) ONLY (40 K BTU Burners)
140871 1 #51 Burner Orifice (liquid propane [L.P.] gas) ONLY (35 K BTU Burners)
6 141129 1 Inshot Burner
7 318293 1 Commercial Electric Oven Housing ONLY
818163 1 Direct Spark Ignition (DSI) Gas TrainAssembly Complete (natural gas)
(includes illus. nos. 1 through 14)
883610 1 Liquid Propane (L.P.) Conversion Kit (includes orifice) (40 K BTU Burners)
883799 1 Liquid Propane (L.P.) Conversion Kit (includes orifice) (35 K BTU Burners)
8 318345 1 Commercial Gas Oven Mounting Bracket
9 318395 1 Burner Retainer Clip
10 142953 1 3/8” x 1/2” Steel Bushing
11 818177 1 Gas Burner Mounting Bracket
12 318519 1 Gas Valve Support Bracket
13 150300 12 #10-16 x 1/2” Hex Washer TEK Screw
14 142634 1 3/8” x 19” Pipe Nipple
15 128935 1 Direct Spark Ignition (DSI) Module with Three (3) Tries
16 128919 1 High Voltage (HV) Ignition Cable with Cap
17 152013 2 #6-32 Hex Nut

18 ElectricOvenAssembly
Illus. No. Part No. Qty.Description
1 318543 1 Electric Oven Housing
2 318294 1 Electric Oven Mounting Bracket
3 120086 1 3-Phase (3ø) Oven (5.4 kW at 240 volt or 8.1 kW at 416 volt)
818155 1 Electric OvenAssembly Complete
(includes illus. nos. 1 through 9)
4 150300 6 #10-16 x 1/2” Hex Washer TEK Screw
5 130400 1 Temperature Sensor
6 153022 4 #10 Flat Washer
7 153024 9 #10 Split Lock Washer
8 152008 9 #10-32 Hex Nut
9 121011 1 Bus Bar