American Dryer Corp. Dyer AD-26 User manual

AD-26 / AD-295AD-26 / AD-295
AD-26 / AD-295AD-26 / AD-295
AD-26 / AD-295
PP
PP
Parar
arar
arts Mants Man
ts Mants Man
ts Manualual
ualual
ual
24 VAC Phase 5
1992 thru 1998
AmericanDryerCorporation
88CurrantRoad
FallRiver,MA02720-4781
Telephone: [phone] / Fax: [phone]
E-mail:[e-mail]
www.amdry.com
ADCPartNo.450122

Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this
product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVEALL SAFETYPRECAUTIONSdisplayedon theequipmentorspecified intheinstallation/operator's
manual included with the dryer.
WARNING: UNDERNOCIRCUMSTANCES should thedoorswitchor the heat circuit
devices ever be disabled.
WARNING: Thedryermustneverbeoperatedwithanyofthebackguards,outertops, or
servicepanelsremoved. PERSONALINJURYorFIRECOULDRESULT.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the
rightto makechanges from timeto time,withoutnotice orobligation, inprices,specifications, colors,andmaterial,
and to change or discontinue models.
Important
Foryourconvenience,logthefollowinginformation:
DATEOFPURCHASE ________________________________________ MODEL NO. _______________________________
DISTRIBUTORSNAME __________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts
from the factory, you can FAX your order to ADC at [phone] or telephone your orders directly to the
ADC Parts Department at [phone]. Please specify the dryer model number and serial number in
addition to the description and part number, so that your order is processed accurately and promptly.The
illustrations on the following pages may not depict your particular dryer exactly.
The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts
thoroughly before ordering.
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER
SMELLSGASMUSTBEPOSTEDINAPROMINENTLOCATION.THE
INSTRUCTIONSTOBEPOSTEDSHALLBEOBTAINEDFROMTHE
LOCAL GAS SUPPLIER.

Table of Contents
Coin Control DoorAssembly For Models Mfd. as of March 21, 1997 .................................................2
Coin Control DoorAssembly For Models Mfd. prior to March 21, 1997 ..............................................3
Non-Coin Control DoorAssembly For Models Mfd. as of March 21, 1997..........................................4
Non-Coin Control DoorAssembly For Models Mfd. prior to March 21, 1997.......................................5
Dual Timer Control DoorAssembly For Models Mfd. as of March 21, 1997 .......................................6
Dual Timer Control DoorAssembly For Models Mfs. prior to March 21, 1997 ....................................7
Single Coin Microprocessor Control PanelAssembly For Models Mfd. as ofApril 11, 1996...............8
Single Coin Microprocessor Control PanelAssembly for Single Coin 25¢ Models Only ....................9
Dual Coin Microprocessor Control Panel Assembly .........................................................................10
Non-Coin Microprocessor Control Panel Assembly..........................................................................11
Microprocessor Control Box Assembly.............................................................................................12
25¢ CoinAcceptor Listing .................................................................................................................13
Dual CoinAcceptor Component Listing for Export Models Only.................................................14, 15
Dual Timer Control Panel Assembly .................................................................................................16
Non-Microprocessor Coin Control Panel Assembly..........................................................................17
Non-Microprocessor Control Box Assembly .....................................................................................18
Main DoorAssembly .........................................................................................................................19
Main Door SwitchAssembly .............................................................................................................20
Coin VaultAssembly .........................................................................................................................21
Coin Front PanelAssembly...............................................................................................................22
Non-Coin Front PanelAssembly .......................................................................................................23
Lint Door Assembly...........................................................................................................................24
Lint Basket / Lint Switch Assemblies ................................................................................................25
AD-26 Tumbler / Support Assemblies For Models Mfd. as of August 17, 1998.................................26
AD-26 Tumbler / SupportAssemblies For Models Mfd prior to August 17, 1998 ..............................27
AD-295 Tumbler / SupportAssemblies For Models Mfd. as of November 2, 1998 ...........................28
AD-295 Tumbler / SupportAssemblies For Models Mfd. prior to November 2, 1998........................29
Tumbler Brush Assembly..................................................................................................................30
Microprocessor Temperature Sensor Bracket Assembly .................................................................31
Non-Microprocessor Temperature Sensor Bracket Assembly..........................................................32
Sail Switch Assembly........................................................................................................................33
Tumbler Bearing Assembly .........................................................................................................34, 35
Totally Enclosed, Non-Vent Motor / IdlerAssemblies...................................................................36, 37
Upshot Burner Assembly ............................................................................................................38, 39
Back Guard Assembly.......................................................................................................................40
12-Rib 120" (J) Poly BeltArrangement .............................................................................................41
Upshot Burner Assembly Specifications ...........................................................................................42
AdditionalPartsAvailable ..................................................................................................................43

2 American Dryer Corporation 450122-6
AD-26/AD-295 Coin Control Door Assembly
For Models Mfd. as of March 21, 1997
Illus. No. Part No. Qty.Description
1 881585 1 AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
881583 1 AD-26/AD-295 Stainless Steel Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 #10 x 1/2” Hex Washer TEK Screw
* Specifycolorwhenordering.

450122-6 Telephone: [phone] / www.amdry.com 3
Illus. No. Part No. Qty.Description
1 880236 1 AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
850414 1 AD-26/AD-295 Coin Control D
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
* Specifycolorwhenordering.
Coin Control Door Assembly
For Models Mfd. prior to March 21, 1997

4 American Dryer Corporation 450122-6
Illus. No. Part No. Qty.Description
1 881586 1 AD-26/AD-295 Non-Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 #10 x 1/2” Hex Washer TEK Screw
* Specifycolorwhenordering.
Non-Coin Control Door Assembly
For Models Mfd. as of March 21, 1997

450122-6 Telephone: [phone] / www.amdry.com 5
Illus. No. Part No. Qty.Description
1 880918* 1 AD-26/AD-295 Non-Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
880917* 1 AD-26/AD-295 Non-Coin Control Door Only
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
* Specifycolorwhenordering.
Non-Coin Control Door Assembly
For Models Mfd. prior to March 21, 1997

6 American Dryer Corporation 450122-6
Illus. No. Part No. Qty.Description
1 881596 1 AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 2 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
7 150300 4 Hex Washer TEK Screw
Dual Timer Control Door Assembly
For Models Mfd. as of March 21, 1997

450122-6 Telephone: [phone] / www.amdry.com 7
Illus. No. Part No. Qty.Description
1 880773* 1 AD-26/AD-295 Coin Control Door with Trim Less Locks
(includes illus. nos. 1, 5, and 6)
850415* 1 AD-26/AD-295 Coin Control Door Only
2 112350 1 ADC Logo Only
870011 1 Logo Double Stick Tape Kit
3 160040 1 ACE®Lock Assembly Only
4 160140 - ACE®Key Only
(key number XX4451)
5 180315 1 AD-26/AD-295 Lower Control Door Trim
6 150310 5 #8 x 1/2" Phillips Pan Head "A" Screw
* Specify color when ordering.
Dual Timer Control Door Assembly
For Models Mfd. prior to March 21, 1997

8 American Dryer Corporation 450122-6
Illus. No. Part No. Qty.Description
1 112568 1 Single Coin Keyboard for Hanke Acceptor
2 881163 1 25¢ Hanke Coin Acceptor with Optic
881450 1 25¢ Canadian Coin Acceptor with Optic
881451 1 0.880 Token Hanke Coin Acceptor with Optic
3 150150 1 2.5 mm x 10 mm Stainless Steel Phillips Screw
4 881143 1 Hanke Optic Switch
5 150415 1 #10-16 x 1/2” Phillips Screw
6 883353 1 Control Panel Assembly Complete Less Acceptor
(includes illus. nos. 1 and 5 through 10)
883352 1 Control Panel Only
7 137216 1 Phase 5 Coin Board
8 152102 4 M-3 Metric Hex Nut
9 153010 2 #6 Star Washer
10 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
Single Coin Microprocessor Control Panel Assembly
For Models Mfd. as ofApril 11, 1996

450122-6 Telephone: [phone] / www.amdry.com 9
Illus. No. Part No. Qty.Description
1 112560 1 AD-26/AD-295 Single Coin Keypad Label Only
2 880887 1 AD-26/AD-295 Single Coin Panel Control less Acceptor - 24 VAC
(includes illus. nos. 1 through 5)
880888 1 AD-26/AD-295 Control Panel Only
3 137216 1 AD-26/AD-295 Phase 5 Microprocessor Controller Only
824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw
6 -------- 1 25¢ CoinAcceptor Only
(refer to 25¢Coin Acceptor Component Listing on page 13)
7 137056 1 Optical Switch Only
8 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
NOTE: Contactfactoryfor exportmodels.
Single Coin Microprocessor Control Panel Assembly
ForSingleCoin25¢ModelsOnly

10 American Dryer Corporation 450122-6
Illus. No. Part No. Qty.Description
1 112560 1 AD-26/AD-295 Dual Coin Keypad Label Only
2 880906 1 AD-26/AD-295 Dual Coin Panel Control less Acceptor - 24 VAC
(includes illus. nos. 1 through 5)
880904 1 AD-26/AD-295 Dual Coin Control Panel Only
3 137216 1 AD-26/AD-295 Phase 5 Control Microprocessor Only
824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw
6 -------- 1 Dual CoinAcceptor Only
(refer to Dual Coin Acceptor Component Listing on
page 14and page 15)
7 137056 2 Optical Switch Only
8 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
NOTE: Contactfactoryfor exportmodels.
Dual Coin Microprocessor Control Panel Assembly
ForExportModelsOnly

450122-6 Telephone: [phone] / www.amdry.com 11
Non-Coin Microprocessor Control PanelAssembly
Illus. No. Part No. Qty.Description
1 112560 1 AD-26/AD-295 Dual Coin Twin-Keypad Label Only
2 880905 1 AD-26/AD-295 Non-Coin Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 5)
880916 1 AD-26 /AD-295 Non-Coin Control Panel Only
3 137216 1 Phase 5 Non-Coin Computer Board Only
824998 1 Phase 5 Battery Clip Only
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw

12 American Dryer Corporation 450122-6
Illus. No. Part No. Qty.Description
1 150103 2 #8-32 x 3/4" Phillips Round Head Machine Screw
2 141403 1 24 VAC Transformer Only
3 151001 2 #8-32 Pal Nut
4 151000 * #6-32 Pal Nut
5 136008 * 3-Position Fuse Block
6 150002 * #6-32 x 1" Phillips Round Head Machine Screw
7** 136057 * 1/2-Amp (Slo Blo) Fuse Only
8 150002 2 #6-32 x 1" Phillips Round Head Machine Screw
9 120715 1 30-Position Terminal Block
10 151000 2 #6-32 Pal Nut
11 122626 1 15-Pin Socket Connector Only
12 122705 11 Socket Terminal Only
13 122704 11 Pin Terminal Only
14 122625 1 15-Pin Socket Connector Only
137025 1 6/15 Position Starin Relief ... Not Illustrated
15 122631 1 6-Pin Socket Connector Only
16 122705 3 Socket Terminal Only
17 122704 3 Pin Terminal Only
18 122630 1 6-Pin Connector Only
137025 1 6/15 Position Starin Relief ... Not Illustrated
19 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
20 121010 1 L-70 Ground Lug
21 132475 1 2-Pole Contactor
22 824828 1 RC Network with Connectors
23 150103 4 #8-32 x 3/4" Phillips Round Head Machine Screw
24 151001 4 #8-32 Pal Nut
* For 115 VAC application quanityis 1 and for 208/230VAC application quanity is 2.
** Check fuse rating for verification.
MicroprocessorControl BoxAssembly

450122-6 Telephone: [phone] / www.amdry.com 13
25¢ Coin Acceptor Component Listing
Illus. No. Part No. Qty.Description
1 881930 1 AD-26/AD-295 25¢ Coin Acceptor Body Only
2 154320 1 #4-40 x 11/16" x 1" U-Bolt Only
3 880800 1 AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Kit
(includes illus. nos. 3 and 15)
125720 1 AD-26/AD-295 25¢ Coin Acceptor Lower Reject with Bracket Only
4 152016 2 #4-40 Hex Nut
5 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
6 137056 1 Optical Switch Only
7 137049 1 Optical Switch Mounting Bracket Only
8 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
9 150020 1 #4-40 x 5/16" Slotted Pan Head Machine Screw
10 125715 1 AD-26/AD-295 25¢ Coin Acceptor UpperAssembly Complete
(includes illus. nos. 10 through 14)
11 125706 1 3/16" CoinAcceptor Retaining Ring Only
12 125704 1 CoinAcceptor Spring Only
13 125705 2 Coin Acceptor Spacer Only
14 125703 1 CoinAcceptor Rod Only
15 150110 1 #8-32 x 1/4" Binding Head Phillips Machine Screw

14 American Dryer Corporation 450122-6
Dual Coin Acceptor Component Listing
ForExportModelsOnly
Illus. No. Part No. Qty.Description
1 125726 1 $1 Canadian CoinAcceptor Body Only
881931 1 1 English Pound (1£) CoinAcceptor Body Only
125738 1 10 Danish Krone (10KR) Coin Acceptor Body Only
881923 1 1 Dutch Guilder (1G) CoinAcceptor Body Only
2 882054 1 25¢ Canadian Coin Acceptor Body Only
125731 1 5 Belgian Franc (5BF) Coin Acceptor Body Only
125737 1 5 Danish Krone (5KR) Coin Acceptor Body Only
881926 2 25¢ Dutch Guilder CoinAcceptor Body Only
3 154320 2 #4-40 x 11/16" x 1" U-Bolt
4 880801 1 Large Lower Reject with Bracket Kit
(includes illus. nos. 4 and 18)
125721 1 $1 Canadian Coin Acceptor LowerAssembly Only
1 50 English Pence (50P) Coin Acceptor LowerAssembly Only
1 1 English Pound (1£) Coin Acceptor Lower Assembly Only
1 20 Belgian Franc (20BF) Coin Acceptor Lower Assembly Only
1 5 French Franc (5 FF) Coin Acceptor Lower Assembly Only
1 10 Danish Krone (10KR) Coin Acceptor LowerAssembly Only
1 1 Dutch Guilder (1G) CoinAcceptor LowerAssembly Only

450122-6 Telephone: [phone] / www.amdry.com 15
Dual Coin Acceptor Component Listing (continued)
ForExportModelsOnly
Illus. No. Part No. Qty.Description
5 880800 1 Small Lower Reject with Bracket Kit
(includes illus. nos. 5 and 18)
125720 1 25¢ Canadian Coin Acceptor LowerAssembly Only
1 20 English Pence (20P) Coin Acceptor LowerAssembly Only
1 5 Belgian Franc (5BF) Coin Acceptor Lower Assembly Only
1 25¢ Dutch Guilder CoinAcceptor Lower Assembly Only
880801 1 Large Lower Reject with Bracket Kit
(includes illus. nos. 5 and 18)
6 152016 4 #4-40 Hex Nut
7 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
8 137056 2 Optical Switch Only
9 137049 2 Optical Switch Mounting Bracket
10 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
11 150020 2 #4-40 x 5/16" Slotted Pan Head Machine Screw
12 125716 1 $1 Canadian Coin Acceptor UpperAssembly Complete
(includes illus. nos. 12 and 14 through 17)
1 50 English Pence (50P) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 1 English Pound (1£) Coin Acceptor UpperAssembly Complete
(includes illus. nos. 12 and 14 through 17)
1 20 Belgian Franc (20BF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 5 French Franc (5FF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 10 Danish Krone (10KR) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 12 and 14 through 17)
1 1 Dutch Guilder (1G) CoinAcceptor UpperAssembly Complete
(includes illus. nos. 12 and 14 through 17)
13 125715 1 25¢ Canadian Coin Acceptor UpperAssembly Complete
(includes illus. nos. 13 through 17)
1 20 English Pence (20P) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
1 5 Belgian Franc (5BF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
1 25¢ Dutch Guilder CoinAcceptor UpperAssembly Complete
(includes illus. nos. 13 through 17)
125716 1 2 French Franc (2FF) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
1 5 Danish Krone (5KR) Coin Acceptor Upper Assembly Complete
(includes illus. nos. 13 through 17)
14 125706 2 3/16" CoinAcceptor Retainer Ring Only
15 125704 2 CoinAcceptor Spring Only
16 125705 4 Coin Acceptor Spacer Only
17 125703 2 CoinAcceptor Rod Only
18 150110 2 #8-32 x 1/4" Binding Head Phillips Machine Screw

16 American Dryer Corporation 450122-6
Dual Timer Control PanelAssembly
Illus. No. Part No. Qty.Description
1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch - 24 VAC
3 880774 1 Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
880920 1 AD-26/AD-295 Dual Timer Control Panel Only
4 131917 1 Push-to-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2" Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block (for models mfd. as of May 2, 1993)
120713 1 18-Position Terminal Block (for models mfd. prior to May 2, 1993)
10 150002 2 #6-32 x 1" Round Head Machine Screw
11 150110 4 #8-32 x 1/4" Phillips Head Machine Screw
12 150001 2 #6-32 x 1/2" Round Head Machine Screw
13 131931 1 Dual Timer Relay - 24 VAC
14 151000 2 #6-32 Pal Nut
15 112050 1 Dual Timer Label Only
16 150309 1 #10-16 x 1/2" HH TEK Crimptite Screw
17 124103 2 Arrow Timer Knob
18 124027 1 60-Minute Timer - 24 VAC
19 124028 1 15-Minute Timer - 24 VAC
20 122602 1 9-Pin Connector Only
21 122700 8 Pin Terminal Only
--- 122801 1 Pin/Socket ExtractionTool

450122-6 Telephone: [phone] / www.amdry.com 17
Non-Microprocessor Coin Control Panel Assembly
Illus. No. Part No. Qty.Description
1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocket Heat Selector Switch - 24 VAC
3 880900 1 Coin Meter Control Panel Assembly Complete Less Meter - 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
880899 1 Coin Meter Control Panel Only
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2" Phillips Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7* 125601 1 25¢ Coin Meter (Specify Timing) - 24 VAC
8 150303 2 #4 x 3/4" Pan Head "A" Screw
9 120712 1 12-Position Terminal Block
10 150415 1 # 10-16 x 1/2" Phillips Round Head Crimptite Screw
11 122602 1 9-Pin Male Connector Only
12 122700 6 Pin Terminal Only
— 122801 1 Pin/ExtractionTool
* Consult factory for coin meters not listed.

18 American Dryer Corporation 450122-6
Non-MicroprocessorControl BoxAssembly
Illus. No. Part No. Qty.Description
1 122603 1 9-Pin Socket Female Connnector
2 122701 6 Socket Terminal Only
122801 1 Pin/Socket ExtractionTool
3 315010 1 9-Pin Connector Bracket
4 150300 2 #10 x 1/2" Hex Washer TEK Screw
5 150300 2 #10 x 1/2" Hex Washer TEK Screw
6 141403 1 24Vac Transformer
7 136008 * Fuse Block/Strip Only
8** 136057 * 1/2Amp (Slo Blo) Fuse
9 150301 * #8-18 x 7/16" Phillips Pan Head TEK Screw
10 150002 2 #6-32 x 1" Slotted Round Head Machine Screw
11 120715 1 30-Position Terminal Block
12 151000 2 #6-32 Pal Nut
13 132475 1 Motor Contactor
14 150103 4 #8-32 x 3/4" Phillips Round Head Machine Screw
15 151001 4 #8-32 Pal Nut
16 824828 1 Filter Capacitor
* For 115 VAC application quanity is 1 and for 208/230 VAC application quanity is 2.
** Check fuse rating for verification.