american lock A700 User manual

A700, A700WO, A706 7/16" 1-1/16" APKG1582940 APKG1612010 APKG2029010 APKG2084090 APKG1807020
A702, A702WO (zinc) 7/16" 1-1/16" APKG1582950 APKG1612010 APKG2029010 APKG2084090 APKG1807020
A701, A701WO, A707 7/16" 2" APKG1582960 APKG1612010 APKG2029010 APKG2084090 APKG1807020
A703, A703WO (zinc) 7/16" 2" APKG1582970 APKG1612010 APKG2029010 APKG2084090 APKG1807020
Disassembly
• Unlock shackle
• Use a Phillips screwdriver to remove security screw
• Remove security nut and trap door
• Remove cylinder and anti-bypass plate
• Place lock on flat surface and close shackle
• Actuator and ball bearings should fall out if not
see page 20
• Remove shackle retaining screw (APKG4765010)
• Remove shackle and spring
Assembly
• Insert shackle spring and shackle
• Insert and tighten shackle retaining screw
• Insert ball bearings
• Insert actuator as shown
• Check operation with follower tool
• Insert cylinder and rotate clockwise
• Insert trap door
• Insert security nut and screw
• Tighten security screw
• Check operation
American Lock Series A700
2
Model
D ameter Length
Shackle
Part No.
Shackle
Spr ng NKR NRK
Ball
Bear ngs
Actuator
For Quantity Content and Ordering Information See the Price Book
For Trap Door Part Numbers, See Page 32
Shackle
Steel Body
Anti-Bypass
Plate
Cylinder
Shackle
Spring Security
Nut
Trap
Door
Security
Screw
Actuator
Ball
Bearings
NKR
NRK