American Signature IA34-415 User manual

06-19-2018
Page1/4
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
UNITSHOULDBEINSTALLEDBY2ORMOREPERSONS.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference.
All Bedsneedtobeset upintheexact final
locationsothatafterfullassemblyit will not
needtobemoved. Moving thebedwill cause
thesupport legstomoveoutof perpendicular
(90 degree),weakenthesupportsystem, and
mayallowthebedtocollapse.
FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
TOOLSREQUIRED(NOTPROVIDED)
PHILLIPS SCREWDRIVER
UTILITYKNIFE(FORCALKING)
COMPONENTS LIST:IA34-415
No. Description Sketch Quantity
1Headboard 1PC
2LeftLeg 1PC
3RightLeg 1PC
4WoodStretcher 1PC
5CenterSupportLeg 1PC
COMPONENTS LIST:IA34-406
No. Description Sketch Quantity
1Bedrails 2PCS
2Slats 5PCS
COMPONENTS LIST:IA34-407
No. Description Sketch Quantity
1Footboard 1PC
2Supportleg(forslats) 5PCS
HARDWARELIST:IA34-406
No. Description Sketch Quantity
IHangerBolt5/16"*3" 8PCS
JHalfMoonWasher5/16" 8PCS
KHexNut5/16" 8PCS
LHexWrench90*25*2mm 1PC
MWoodScrewM4*1-1/4" 10PCS
HARDWARELIST:IA34-415
No. Description Sketch Quantity
ABolt 5/16"*2" 6PCS
BBolt5/16"*1-1/2" 4PCS
CBolt1/4"*1-1/4" 4PCS
DLockWasher 5/16"10PCS
EFlatWasher 5/16"*3/4" 10PCS
FLockWasher 1/4" 4 PCS
GFlatWasher 1/4"*3/4" 4PCS
HAllenWrench4mm 1SET
ITEMNO: IA34-415/406/407
KING PANEL BED-ROSALIECHESTNUT
IA34-407
IA34-406
IA34-415

06-19-2018
Page2/4 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
STEP4:Thesiderailsmaybeusedon eitherside.
Arrangethesiderailssotheslatbearersarein
LOWERPOSITIONprior toattachmentinSTEP5.
Slatbearerin
upperposition
Slatbearerin
lowerposition
ITEMNO: IA34-415/406/407
KING PANEL BED-ROSALIECHESTNUT
HBBackside
LeftLeg
Right Leg
HBBackside
WoodStretcher
Center SupportLeg
A
D
E
H
D
E
BH
C
F
G
HHBBackside
STEP1:Puttheheadboardfacedownon a
softsurface.Attachtheleftlegand right
legtoheadboardbyusing6bolts(A), lock
washers(D)and flat washers(E).
STEP2:Attachthewoodstretcher
tothelegsbyusing4bolts(B), lock
washers(D)and flat washers(E).
STEP3:Attachthecentersupport leg
toheadboardandwood stretcherby
using4bolts(C),lockwashers(F)and
flat washers(G).

06-19-2018
Page3/4 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
STEP6:Attachthesupportlegswithlevelertotheslats.
Adjustthelevelersonbottom ofsupportlegswhennecessary.
SupportLeg
Leveler
ThisEndUp
Slat
STEP7:Placetheslatsintherightposition
markedby thespacerblocksandattachslats
totheslatbearerswithwoodscrews(M).
STEP5:Screwthebolts(I)intoHB&FB.Aligntheboltswiththeholesintheend ofsiderails
andattachthesiderailstoHB&FBusinghalfmoonwashers(J)and nuts(K).Thenuseahex
wrench(L)totightenall thenuts.
M
ITEMNO: IA34-415/406/407
KING PANEL BED-ROSALIECHESTNUT
Makesuretheslatbeareris
intheLOWERposition.
Slatbearer
SideRail
SideRail
SideRail
I
JK
L
Theoutsideholesmatchto6/6bedrails(-406 rails),
theinsideholesmatchtoHollywoodframe.

06-19-2018
Page4/4 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
FUNCTIONALITY INSTRUCTION
1PoweredUSBPortfor
Charging on bothsides
IA34-406
IA34-407
IA34-415
ITEMNO: IA34-415/406/407
KING PANEL BED-ROSALIECHESTNUT

04-12-2018
TOOLSREQUIRED(NOTPROVIDED)
Page1/1
ITEMNO:IA34-4502-DRAWERNS-ROSALIECHESTNUT
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference. FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
PHILLIPS SCREWDRIVER
HARDWARELIST:
No. Description Sketch Quantity
ABolt5/16''x1-3/4" 8PCS
BLockWasher 5/16'' 8PCS
CFlatWasher 5/16''*5/8" 8PCS
DAllenWrench4mm 1SET
TippingRestraintHardware 1SET
COMPONENTS LIST:
No. Description Sketch Quantity
1Case 1PC
2Leg 4PCS
STEP1:Putthecaseupsidedownonasoftsurface, Attachthe
legstothebottomof casebyusing8bolts(A), lockwashers(B)
andflatwashers(C).Returnthecasetotheupright position.
B
A
C
D
FUNCTIONALITY INSTRUCTION
Felt-linedTopDrawer
Cedar-linedBottom Drawer
LeveleronLegs
Adjusttheleveler
whennecessary
Pullout Panel
2ACoutlet PowerPack
Felt-linedHiddenDrawer
Leveler
Leg
CaseBottom
2"

HARDWARELIST:
No. Description Sketch Quantity
ABolt5/16''x1-3/4" 8PCS
BLockWasher 5/16'' 8PCS
CFlatWasher 5/16''*5/8" 8PCS
DAllenWrench4mm 1SET
TippingRestraintHardware 1SET
04-12-2018
Page1/1
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference. FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
TOOLSREQUIRED(NOTPROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:
No. Description Sketch Quantity
1Case 1PC
2Leg 4PCS
3SupportLeg 1PC
STEP1:Putthecaseupsidedownonasoft
surface, Attachthelegsandsupportlegto
thebottomof caseby using 8bolts(A),lock
washers(B)andflatwashers(C).Returnthe
casetotheuprightposition.
B
A
C
D
FUNCTIONALITY INSTRUCTION
Leveler
Leg
CaseBottom
LeveleronLegs& SupportLeg
Support Leg
Leveler
Adjusttheleveler
whennecessary
Felt-linedTopDrawers
Cedar-linedBottomDrawers
Removable Jewelry tray
OpenDrawertoFlipupDrawer
2"
ITEMNO:IA34-455TALLDRESSER-ROSALIECHESTNUT

V Mount
Assembly instructions for the V
mount are in the V mount package.
Follow these instructions when
attaching V mount and V to the
V frame.
hank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING HIS PRODUC PLEASE READ, UNDERSAND, AND FOLLOW HESE INSRUCIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
OOLS REQUIRED (NO PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIS:
No. Description Sketch Quantity
A Bolt Ø1/4"*1-1/4" 8 PCS
B Lock Washer Ø1/4" 8 PCS
C Flat Washer Ø1/4" *3/4" 8 PCS
D Allen Wrench 4mm 1 SE
COMPONENS LIS :
No. Description Sketch Quantity
1 V Frame 1 PC
2 Metal Strip 2 PCS
3 V Mount 1 Set
FUNCIONALIY INS RUCION
Leveler on Legs &
Support Leg
Adjust the leveler
when necessary
04-12-2018
Page 1/2
IEM NO: IA34-487 V PANEL MOUN-ROSALIE CHESNU
MADE IN VIE NAM
ASSEMBLY INSRUCIONS
R
RR
IA34-487
IA34-455

A
B
C
D
all Dresser Back
A
B
C
D
Metal Strip
SEP 1: Attach the metal strips to inner sets of threaded inserts on the tall dresser by using 4 bolts
(A), lock washers (B) and flat washers (C). See below. Do not tighten the bolts completely.
all Dresser Back
all Dresser Back
Metal Strip
SEP 2: Attach the metal strips to the V frame by using 4 bolts (A), lock washers (B) and
flat washers (C). ighten all the bolts on V frame and tall dresser with Allen wrench.
Metal Strip
04-12-2018
Page 2/2
IEM NO: IA34-487 V PANEL MOUN-ROSALIE CHESNU
MADE IN VIE NAM
ASSEMBLY INSRUCIONS
R
RR