AMERICAN SPECIALTIES EZ FILL 0394 Series User manual

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
MODEL №:
ISSUED:
REVISED:
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
0394-(n)
06-16
13 FEB 2020
EZ FILL™ VANITY MOUNTED AUTOMATIC FOAM SOAP DISPENSER (Pg 1 of 2)
*
AC
ADAPTER
1-1/2" DIA
[Ø38]
2-1/4"
[57]
2-3/4"
[69]
2-9/16"
[65]
5-3/32"
[129]
6-1/4"
[160]
13-1/8"
[332]
6-3/4"
[170]
4-1/8"
[104]
5/8"
[16]
BOTTLE
SUPPORT MANUAL PRIMING
FILL BUTTON
BATTERY BOX
EXTENSION CABLE
[OPTIONAL]
8-5/8"
[219]
5-7/8"
[145]
3-7/16"
[87]
3-1/2" DIA
[Ø90]
9-3/32"
[231]
1-1/4"
[32]
BATTERY
BOX
L= 23-5/8"
[600] TYP.
0390-ARK
ANTI-ROTATION
PIN
SPECIFICATION
EZ FILL™ Vanity Mounted Automatic Foam Soap Dispenser shall hold and dispense 33.8 oz (1 L) of liquid foaming soap
with pH in range 7± 1.5 and viscosity in range 1–100 cP (mPa•s) and shall dispense in stream cycles with soap volume and
air volume adjustable by owner with remote control programming unit (optional, Model № 0390-R; supplied one (1) per six
(6) pack). Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump is
powered by six (6) ‘D’-size 1.5V batteries (supplied by others) in a screw-locked IP67 rated compartment (provided) located
under counter or an AC Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others). Unit shall
have chrome plated spout and sensor housing with a highly polished finish (or Matte Black when code –41 is specified) over
all exposed surfaces. Unit shall have LED in sensor to indicate function and battery condition (when Battery Box, 0390-BP
{provided}, is used). A self-adhesive label shall be supplied for use at owner’s option to indicate dispenser function. Tank
shall be translucent to show quantity of soap remaining at any time. Tank shall be disengaged and engaged into pump as-
sembly under counter by manually unscrewing to allow refilling and threading back up into pump/control housing to retain
for operation. Unit shall mount on vanity deck up to 2" [51] thick through 1" Dia [Ø25] hole min to 1-1/4" Dia [Ø32] max
and shall resist forced rotation up to 177 in-lbf (20 Nm) with 0390-ARK properly installed (provided). Owner’s Manual and
Installation Guide (OM & IG) shall be provided with unit in carton.
EZ FILL™ Vanity Mounted Automatic Foam Soap Dispenser shall be Model № 0394-______(specify suffix code -41
for Matte Black color from schedule) of American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-
NOTE
ALL DIM’S INCH [MM]
ILLUSTRATION FOR REF ONLY AND NTS
SEE SOAP DISPENSER CARE & MAINTENANCE
DOCUMENT ONLINE FOR CLEANING
**
FIELD CUT TO SUIT TO
BE MINIMUM LENGTH
(SEE OM & IG)

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
MODEL №:
ISSUED:
REVISED:
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
INSTALLATION
Install spout and sensor housing to vanity deck with anti-rotation kit escutcheon flange, rubber washers and basin nut
(supplied) through 1-1/8" Dia [Ø28,5] mounting hole and 5/32" Dia [Ø4] adjacent hole for anti-rotation pin of escutcheon
flange. Connect flex tubing from soap dispenser head to fitting on top of foam compressor. Connect com plug from
dispenser head to com socket from foam compressor. Mount pump assembly with wall bracket to convenient structure under
vanity within 24" [610] of L-fitting on foam compressor bottom with two (2) screws and wall anchors (supplied). Connect
flex tubing from L-fitting on air compressor to fitting on top of pump assembly. Connect com plug from foam compressor to
com socket from pump assembly. Mount battery compartment in convenient location under vanity deck with two (2) screws
and wall anchors (supplied) within easy reach of extension cable length and plug connector into mating inline power
connector. Install six (6) ‘D’-size 1.5V cells (supplied by others) in under-deck battery compartment according to polarity
indication, plug battery cable jack into battery box socket in cover handle and screw lock cover. Alternatively, plug AC
Adapter into GFCI power outlet located under vanity within 13.5 ft (412 cm) of pump assembly and plug connector into
mating inline power connector. See OM & IG provided in box with unit for complete installation details.
OPERATION
System shall operate each time an object is positioned within the sensing range of 1-3/16" [30] to 3-15/16" [100] ± 3/8" [10]
directly in front of the spout of the dispenser. A stream of foam soap will be pumped from the nozzle during each activation.
Optional remote control unit Model № 0393-R (supplied {one (1) per six (6) pack} or order separately) will allow owner
programming of alternate dispense amounts and simplify priming when refilling soap container for initial setup and soap-out
conditions. See Model № 0393-R TDS and Owner’s Manual for complete description of functions. Unit will dispense foam
soap while batteries are at suitable charge level (or AC adapter is connected) and correct viscosity soap is present in the tank
and system is correctly maintained to enable dispensing (LED is not flashing continuously or does not remain dark when
trigger attempt is made). LED will display flash for sensing and continuous flashing for low battery condition (if AC
Adapter is not utilized). Manual priming fill button on pump runs motor (or use 0390-R) for easy soap priming. Soap is
manually replenished and batteries are replaced on service interval determined by maintenance schedule. See OM & IG for
complete description of Features and Operations.
0394-(n)
06-16
13 FEB 2020
EZ FILL™ VANITY MOUNTED AUTOMATIC FOAM SOAP DISPENSER (Pg 2 of 2)
Schedule of Model № Suffix Codes and Application
Model № Suffix Service Application
1A Universal Model, Battery Operation Bright Chrome Plated Finish
1A-41 Universal Model, Battery Operation Matte Black Finish
1AC USA/UK/EU AC Adapter Operation Bright Chrome Plated Finish
1AC-41 USA/UK/EU AC Adapter Operation Matte Black Finish
3AC AU Model, AC Adapter Operation Bright Chrome Plated Finish
3AC-41 AU Model, AC Adapter Operation Matte Black Finish
6-1A Universal Model, Battery Operation, Six Pack Bright Chrome plated Finish
6-1A-41 Universal Model, Battery Operation, Six Pack Matte Black Finish
6-1AC USA/UK/EU AC Adapter Operation, Six Pack Bright Chrome Plated Finish
6-1AC-41 USA/UK/EU AC Adapter Operation, Six Pack Matte Black Finish
6-3AC AU Model, AC Adapter Operation, Six Pack Bright Chrome Plated Finish
6-3AC-41 AU Model, AC Adapter Operation, Six Pack Matte Black Finish