American Standard Colony 2740.118C User manual

H65
COLONY™ 5' x 30" w/INTEGRAL APRON
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
Revised 1/07
COLONY™ 5' x 30" WHIRLPOOL AND
BATHING POOL with INTEGRAL APRON
❏2740.118 Whirlpool, Right Hand Outlet
❏2740.218 Whirlpool, Left Hand Outlet
Product Features:
• High Gloss Acrylic with berglass reinforcement
• Integral apron with removable access panel
• Integral three-sided, tiling/water retention ange
• Integral lumbar support
• Molded-in arm rests with elbow supports
• Above oor rough
• 1.25 HP single speed, self-draining pump/motor
• Six multi-direction jets
• One air volume control
• Deck mounted air switch On/Off control
• Factory installed and tested whirlpool system
EverClean™ Whirlpool Massage featuring System I
❏2740.218C Whirlpool featuring System I,
Left Hand Outlet
❏2740.118C Whirlpool featuring System I,
Right Hand Outlet
• Same as above except with the EverClean™
whirlpool system featuring Antimicrobial
AlphaSan®
❏2740.102 Bath only, Right Hand Outlet
❏2740.202 Bath only, Left Hand Outlet
• Same as above without whirlpool system
Nominal Dimensions:
(59-7/8" x 29-7/8" x 19-1/4")
1521 x 759 x 489mm
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Specied - Required:
❏Color:
❏Bath Faucet: (specify nish)
❏Bath Drain: 1583.470 (specify nish)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
© 2007 American Standard Inc.

H66
COLONY™ 5' x 30" w/INTEGRAL APRON
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
60
(1524mm)
30
(762mm)
WATER
RETENTION
FLANGE
(3 SIDES)
7
(178mm)
C/L OF DRAIN
1-1/2 (38mm) (6) JETS
PUMP
FINISHED
WALL
3/4
(19mm)
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 O.D.
TAILPIECE
SEE FITTING
SPECS FOR
DIMENSIONS
(1) AIR VALVE
ON/OFF
SWITCH
ACCESS TO PUMP/MOT
THROUGH REMOVABLE
FRONT ACCESS PANEL
14-1/8
(359mm)
BATH SUPPORT
MATERIAL
19
(483mm)
7/8 WATER
RETENTION
FLANGE
(3 SIDES)
19-1/4
(489mm)
ROUGH
FLOOR
FINISHED
WALL
TOP OF
DECK
3
(76mm)
3-3/4
(95mm)
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
C/L OF
OVERFLOW
12
(305mm)
OPT. 4
(102mm)
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
2-1/2
(64mm)
UNDERSIDE
OF DECK
LEVELING
STRINGER
NOT FOR
SUPPORT
TILING
FLANGE
BATH SUPPORT
MATERIAL
19
(483mm)
7/8 WATER
RETENTION
FLANGE
(3 SIDES)
19-1/4
(489mm)
LEVELING STRINGER
NOT FOR SUPPORT
ROUGH
FLOOR
FINISHED
WALL
TOP OF
DECK
59-7/8
(1521mm)
29-7/8
(759mm)
WATER
RETENTION
FLANGE
(3 SIDES)
6-1/4
(159mm)
C/L OF DRAIN
1-1/2 (38mm)
3
(76mm)
3-3/4
(95mm)
FINISHED
WALL
12
(305mm)
OPT.
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
C/L OF
OVERFLOW
4
(102mm)
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
SHOWER ARM
2-1/2
(64mm)
3/4
(19mm)
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 O.D.
TAILPIECE
SEE FITTING
SPECS FOR
DIMENSIONS
UNDERSIDE
OF DECK
14-1/8
(359mm)
GENERAL SPECIFICATIONS FOR 2740 WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP 1.1 HP, 9.9 AMPS,120V.
59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
105 Lbs. (47 Kgs.)
480 Lbs. (216 Kgs.)
45 Gal. (171 L)
38 Gal. (144 L)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
11-1/2 (292mm)
39 Lbs./Sq.Ft. (188 Kgs./Sq.m)
20.8
35.3
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
GENERAL SPECIFICATIONS FOR 2740 BATHING POOL
59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
70 Lbs. (32 Kgs.)
462 Lbs. (208 Kgs.)
47 Gal. (178 L)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
11-1/2 (292mm)
37 Lbs./Sq.Ft. (179 Kgs./Sq.m)
20.8
35.3
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2740.118).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and
A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Revised 1/07
© 2007 American Standard Inc.