American Standard Lifetime 2645L User manual

HD-9
© 2007 American Standard Inc.
LIFETIME™ OVAL
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
LIFETIME™ OVAL
5-1/2' Whirlpool and Bathing Pool
❏ Model# 2645L (specify color)
• Acrylic with berglass reinforcement
• Molded-in lumbar back rest
• Factory installed and tested whirlpool system
• 1.4 HP single speed, self-draining pump/motor
• Six adjustable Ideal Flow Comfort Jets™
• Side-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
• Self leveling feet
• Designed with undermount installation option
❏ Model# 2645LC:
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
❏ Model# 2645L.002 Bathing Pool only
Nominal Dimensions:
66” x 36” x 19-3/4”
(1676 x 914 x 502mm )
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Revised 7/07
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
OR 1599.500.020 (white only)
To Be Specied - Optional:
❏ 5-1/2 Foot Acrylic Apron: 9366.018.XX (specify color)
❏ 5-1/2 Foot Apron: 9266.018.XXX (specify color)
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* See American Standard Faucet Selector
AlphaSan® is a registered trademark of Milliken & Co.

HD-10
© 2007 American Standard Inc.
LIFETIME™ OVAL
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
Revised 7/07
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9266.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
66"
(1676mm)
5-3/8"
(137mm)
6"
(152mm) 36"
(914mm)
8-1/4"
(210mm)
3"
(76mm)
11-1/4"
(286mm)
36"
(914mm)
18"
(457mm)
19-3/4"(H)
(502mm)
18-1/4"(C)
(464mm)
C/L OF
DRAIN
15-1/4"(A)
(387mm)
CUT OUT IN FLOOR
FOR DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
66 x 36 x 19-3/4 In.
(1676 x 914 x 502mm)
96 Lbs. (44 Kg.)
580 Lbs. (263 Kg.)
58 Gal. (219 L)
42 Gal. (159 L)
49 x 26 In. (1245 x 660mm)
62 X 32 In. (1575 x 813mm)
12-3/4 In. (324mm)
35 Lbs./Sq.Ft. (171 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2645L BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.PUMP