American Standard Evolution 2422V User manual

H91
© 2008 AS America Inc. Revised 4/06
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1599.205.XXX (specify color)
Custom Accessories Available:
❏ Safe-T-Heater Whirlpool Heater: 9075.120
❏ 5 Foot Apron: 9261.019.XXX (specify color)
❏ Tile Bead Kit: 751755-100
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: Whirlpool Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
EVOLUTION™ 5' x 32"
Comfortable bathing design with form-tted
backrest and molded-in armrests
❏ 2422VC Whirlpool w/EverClean® System
• EverClean® System
• Deep Soak overow drain
• 1.4 HP single speed pump/motor
• Side-mounted air switch On/Off
• Eight Jet system featuring:
- Two ow adjustable Comfort Jets™
Hi-Flo Jets
- Six ow adjustable Comfort Jets™
including two in lumbar area
• Two silent air volume controls
• Undermount installation option
• Quick connect whirlpool heater system
(must order whirlpool heater separately)
❏ 2422V Whirlpool
• Same as 2422VC without EverClean System
❏ 2422V.002 Bathing Pool
Nominal Dimensions:
60" x 32" x 21-1/2"
(1524 x 813 x 546mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
* See American Standard Faucet Selector
EVOLUTION™ 5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS

H92
© 2008 AS America Inc.
EVOLUTION™ 5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 3/06
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
Model 2422VA
shown
60 x 32 x 21-1/2 In.
(1524 x 813 x 546mm)
74 Lbs. (34 Kg.)
690 Lbs. (313 Kg.)
74 Gal. (280 L)
33 Gal. (125 L)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 X 26 In. (1327 x 660mm)
18-1/2 In. (470mm)
52 Lbs./Sq.Ft. (253 Kgs./Sq.m)
GENERAL SPECIFICATIONS FOR 2422V WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1.4 HP, 9.7 AMPS, 120V.PUMP
60"
(1524mm)
32"
(813mm)
11"
(279mm)
7-3/4"
(197mm)
13-3/4"
(349mm)
6"
(152mm)
3"
(76mm)
3-1/4"
(83mm)
32"
(813mm)
20"(C)
(502mm)
21-1/2"(H)
(546mm)
C/L OF
OVERFLOW
20-1/8"(A)
(511mm)
CUT OUT IN FLOOR
FOR DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
GENERAL SPECIFICATIONS FOR 2422V BATHING POOL
60 x 32 x 20-1/2 (1524 x 813 x 546mm)
54 Lbs. (27 Kg.)
675 Lbs. (306 Kg.)
74 Gal. (280 L.)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 x 26 In. (1327 x 660mm)
18-1/2 (470mm)
57 Lbs./Sq.Ft. (247 Kgs./Sq.m)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)