American Standard Stratford 2470.002 User manual

STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
STRATFORD 5-1/2' WHIRLPOOL AND
BATHING POOL
❏2470.028W Whirlpool Featuring System I:
• Americast®brand engineered material
• Acid-resistant porcelain finish
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• End drain outlet
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
❏2470.128W Whirlpool Massage featuring
System I with Grab Bar Drilling
• Same as 2470.028W except with grab bar
drilling (grab bar must be ordered
seperately)
❏2470.028WC StayClean™ Whirlpool
Massage featuring System I
• Same as 2470.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏2470.128WC StayClean™ Whirlpool
Massage featuring System I
• Same as 2470.128W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan® and grab bar
drilling (grab bar must be ordered
seperately)
❏2470.002 Bathing Pool
❏2470.102 Bathing Pool with Grab Bar Drilling
• Same as 2470.002 except with grab bar
drilling (grab bar must be ordered seperately
Nominal Dimensions: 66" x 32" x 20"
(1676 x 813 x 508mm)
Bathing Well Dimensions: 60" x 27" x 18"
(1524 x 686 x 457mm)
Americast®brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.
© 2005 American Standard Inc. BV-36
Rev. 4/05
NOTE: Roughing-in dimensions shown on reverse
side of page.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏Color:
❏Bath Filler: (specify finish)
❏Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏Safe-T-Heater*: 9075.120
❏Jet Trim Ring Kit: 9860.200-one per kit
(specify color) for Body Massage Jets only
❏Universal Tile Bead Kit: 751755-100
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.

STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
© 2005 American Standard Inc.
1676mm
(66)
813mm
(32)
235mm
(9-1/4)
406mm
(16)
OUTLINE OF 1638 X 775mm
(64-1/2 X 30-1/2) CUTOUT
19mm
(3/4)
C/L OF
SUPPLIES
FINISHED
WALL
32mm
(1-1/4)
C/L OF DRAIN
OUTLET
229 X 305mm
(9 X 12) FLOOR CUTOUT
508mm
(20)
476mm
(18-3/4)
MIN.
32mm
(1-1/4)
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE 70mm
(2-3/4)
117mm (4-5/8)
SUPPORT
STRINGER
305mm
(12) 102mm
(4)
1651-1982mm
(65-78)
OPTIONAL
70mm
(2-3/4)
FINISHED
WALL C/L OF
SHOWER ARM
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
OVERFLOW
SEE FITTING SPECS
FOR DIMENSION
203mm
(8)
1676mm
(66)
813mm
(32)
PROVIDE ACCESS
TO PUMP FOR
SERVICING
ON ALL
INSTALLATIONS
235mm
(9-1/4)
406mm
(16)
OUTLINE OF 1638 X 775mm
(64-1/2 X 30-1/2) CUTOUT
19mm
(3/4)
C/L OF 1/2
SUPPLIES
AS REQUIRED
FINISHED
WALL
PUMP
ON/OFF
SWITCH
32mm
(1-1/4)
C/L OF DRAIN
OUTLET
229 X 305mm
(9 X 12) FLOOR CUTOUT
508mm
(20)
476mm
(18-3/4)
MIN.
32mm
(1-1/4)
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE 70mm
(2-3/4)
117mm (4-5/8)
SUPPORT
STRINGER
324mm
(12-3/4) 102mm
(4)
711mm
(28) 32mm (1-1/4) DIA. HOLE
1/2 N.P.T. SHOWER
44mm (1-3/4) DIA. HOLES
FOR CONTROL VALVES
32mm (1-1/4) DIA. HOLE FOR
1/2 N.P.T. SPOUT
203mm
(8)
1651-1982mm
(65-78)
OPTIONAL
1/2 SUPPLIES
AS REQ'D
C/L OF SHOWER
CURTAIN ROD
1930mm (76)
OPTIONAL
TO FLOOR
70mm
(2-3/4)
FINISHED
WALL
C/L OF
OVERFLOW
76mm
(3)
SAFE-T-HEATER
REMOVABLE BLANK
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER,
ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY RIM,
SUMP SUPPORT NOT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY
OTHERS
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH
WHIRLPOOL/BATH FOR ADDITIONAL INFORMATION.
OPTIONAL 3-WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED
SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
SHOWN WITH POP-UP C.D. & O.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
CONCEALED PIPING NOT INCLUDED.
GENERAL SPECIFICATIONS FOR 2470 WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP 1.6 HP, 9.7 AMPS,120V.
66 x 32 x 20 In. (1676 x 813 x 508mm)
201 Lbs. (90 Kg.)
701 Lbs. (315 Kg.)
60 Gal. (227 L)
40 Gal. (152 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
55 Lbs./Sq.Ft. (223 Kgs./Sq.m)
13.9
33.7
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
GENERAL SPECIFICATIONS FOR 2470 BATHING POOL
66 x 32 x 20 In. (1676 x 813 x 508mm)
174 Lbs. (78 Kg.)
674 Lbs. (303 Kg.)
60 Gal. (227 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
48 Lbs./Sq.Ft. (206 Kgs./Sq.m)
13.9
33.7
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
Dimensions of fixtures are nominal and may vary within the range of toler-
ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibili-
ty is assumed for use of superseded or voided leaflet.
IMPORTANT: