American Standard Town Square 2748.002 User manual

H25
© 2008 AS America Inc.
TOWN SQUARE® 5' x 42"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
TOWN SQUARE® 5' x 42" WHIRLPOOL AND
BATHING POOL
❏ 2748.018WC Whirlpool Massage System
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• Two person design with center drain and dual
lumbar ends
• Faucet/Accessory deck area
• 1.6 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Six multi-directional and ow adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• EverClean® System
❏ 2748.018WC.K2 Whirlpool Massage System
with Chromatherapy
Same as 2748.018WC but also includes:
• Two digitally controlled lights
• Backlit electronic control with color selector and
color cycle function
❏ 2748.002 Bathing Pool only
Nominal Dimensions:
59-1/2" x 41-5/8" x 23"
(1511 x 1057 x 584mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion additive
right into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could cause
deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
To Be Specied - Required:
❏ Color:
❏ Drain 1594.170 (specify nish):
❏ Town Square Bath Faucet:
❏ D/M Filler with Personal Shower: 2555.901
(specify nish)
❏ D/M Filler less Personal Shower: 2555.900
(specify nish)
❏ Town Square Bath/Shower Faucet:
❏ B/S for Wall Mount Spout: 2555.602 (specify nish)
❏ B/S for Deck Mount Spout: 2555.652 (specify nish)
❏ Other Bath Faucet (specify nish):
To Be Specied - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Apron: 9460.018 (specify color
❏ Tile Bead Kit: 751755-200
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
Rev. 2/08

H26
© 2008 AS America Inc.
TOWN SQUARE® 5' x 42"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
SAFE-T-HEATER
REMOVABLE
BLANK
59-1/2"
(1511mm)
INTEGRAL
FITTING DECK
2-1/2" X 14"
(64 X 356mm)
29-7/8"
(759mm)
41-5/8"
(1057mm)
ON/OFF
SWITCH
SUCTION OUTLINE OF CUTOUT
58-1/4" X 40-1/4"
(1480 X 1022mm)
PROVIDE ACCESS
TO PUMP FOR
SERVICE ON ALL
INSTALLATIONS
C/L OF
DRAIN
OUTLET
FLOOR CUTOUT
5" X 12"
(127 X 305mm)
3/4"
(19mm)
14-1/2"
(368mm)
5-1/4"
(133mm)
JETS (6)
3"
(76mm)
OUTLINE OF
SKID RESISTANT
SURFACE
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2" N.P.T.
THREADS
2"
(51mm)
5-3/4"
(146mm)
C/L OF
OVERFLOW
21"
(533mm)
23"
(584mm)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
1-1/2" O.D.
TAILPIECE
3/4"
(19mm)
3-1/8"
(79mm)
PUMP
EDGE OF
FLOOR
CUTOUT
PUMP
59-1/2"
(1511mm)
INTEGRAL
FITTING DECK
2-1/2" X 14"
(64 X 356mm)
29-7/8"
(759mm)
41-5/8"
(1057mm)
OUTLINE OF CUTOUT
58-1/4" X 40-1/4"
(1480 X 1022mm)
C/L OF
DRAIN
OUTLET
FLOOR CUTOUT
5" X 12"
(127 X 305mm)
3/4"
(19mm)
14-1/2"
(368mm)
5-1/4"
(133mm)
3"
(76mm)
OUTLINE OF
SKID RESISTANT
SURFACE
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2" N.P.T.
THREADS
2"
(51mm)
5-3/4"
(146mm)
C/L OF
OVERFLOW
21"
(533mm)
23"
(584mm)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
1-1/2" O.D.
TAILPIECE
3/4"
(19mm)
3-1/8"
(79mm)
EDGE OF
FLOOR
CUTOUT
GENERAL SPECIFICATIONS FOR 2748 WHIRLPOOL
59-1/2 x 41-5/8 x 23 In. (1511 x 1057 x 584mm)
110 Lbs. (50 Kg.)
611 Lbs. (278 Kg.)
60 Gal. (227 L)
55 Gal. (208 L)
34 x 24 In. (864 x 610mm)
52 x 31 In. (1321 x 1321mm)
12-1/2 In. (318mm)
40 Lbs./Sq.Ft. (194 Kgs./Sq.m)
27.8
45.4
1.6 HP, 9.7 AMPS ,120V.WHIRLPOOL PUMP
WHIRLPOOL ELECTRICAL SPECIFICATIONS
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
GENERAL SPECIFICATIONS FOR 2748 BATHING POOL
59-1/2 x 41-5/8 x 23 In.
(1511 x 1057 x 584mm)
110 Lbs. (50 Kg.)
611 Lbs. (278 Kg.)
34 x 24 In. (864 x 610mm)
52 x 31 In. (1321 x 1321mm)
12-1/2 In. (318mm)
40 Lbs./Sq.Ft. (194 Kgs./Sq.m)
27.8
45.4
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
OPTIONAL TILING BEAD KIT No. 751755-200 AVAILABLE.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certied.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
Rev. 2/08