American Standard Colony 2388.012 User manual

K96
© 2008 AS America Inc.
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
229mm
(9)
19mm ± 6mm
(3/4 ± 1/4)
305mm
(12)
711mm
(28)
C/L OF OUTLET
83mm
(3-1/4)
FINISHED WALL
381mm
(15)
419mm
(16-1/2)
C/L
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
308mm
(12-1/8)
159mm
(6-1/4)
16mm
(5/8)
FINISHED
FLOOR
743mm
(29-1/4)
235mm
(9-1/4)
152mm
(6)
508mm
(20)
203mm
(8)
SUPPLY
AS
REQ'D
365mm
(14-3/8)
*
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
❏ Seat: American Standard #5308.014 “Laurel”
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
COLONY™
ROUND FRONT TOILET
VITREOUS CHINA
COLONY™ ROUND FRONT TOILET
❑ 2388.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory ush tested
❑ 3338.012 Bowl
❑ 4392.016 Tank
Nominal Dimensions:
711 x 508 x 743mm
(28" x 20" x 29-1/4")
Fixture only, seat and supply by others
Alternate Tank Congurations Available:
❑ 4392.500 Tank complete with Aquaguard Liner
❑ 4392.800 Tank complete with trip lever located
on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08