American Standard Colony Pedestal Sink 0113.404 User manual

J14
© 2008 AS America Inc.
COLONY™ 24"
PEDESTAL SINK
VITREOUS CHINA
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
23-3/4"
(603mm)
35-1/4"
(895mm)
*23"
(584mm)
*21"
(533mm)
4-1/4"
(108mm)
8" (203mm)
8"
(203mm)
5-1/2"
(140mm)
1-1/4" O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
FINISHED
FLOOR
3/8" (10mm) DIA.
ANCHOR SCREW
HOLES ON
16" (406mm) CTRS
ANCHOR SCREW
HOLES (2) 3/8"
(10mm) DIA. ON
4-3/4" (121mm)
CTRS
28-1/4"
(718mm)
DRAIN
CHASE
OPEN
TO
FLOOR
8"
(203mm)
FINISHED
WALL
20"
(508mm)
20-3/4"
(527mm)
16"
(406mm)
3-3/4"
(95mm)
8"
(203mm)
PEDESTAL ANCHORING
SCREW HOLES
3/8" (10mm) DIA.
5" (127mm) REF.
PEDESTAL/WALL
CLEARANCE 4"
(102mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
5-1/2"
(140mm)
PEDESTAL
BASE
S9 WALL-MT
HANGER
5/16" (8mm) X 1-1/16" (27mm)
ANCHOR SCREW HANGER
MTG HOLES (2) ON
4-1/2" (114mm) CTRS
1-1/4"
(32mm)
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Faucet:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
COLONY™ 24" PEDESTAL SINK
• Vitreous china lavatory and pedestal
• Front overow
• Fitting ledge with generous shelf area
• Supplied with mounting kit
Shown with 2385.060 Reliant faucet
(not included)
❏ 0113.411 Faucet holes on 4" (102mm) centers
(Illustrated)
❏ 0113.811 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
23-3/4" x 20" x 35-1/4"
(603 x 508 x 895mm)
Separate Components:
❏ 0113.404 Pedestal top 4" (102mm) centers
❏ 0113.808 Pedestal top 8" (203mm) centers
❏ 731100-400 Pedestal only
Bowl sizes:
18-1/2" (470mm) wide
12-1/2" (318mm) front to back
5-1/2" (127mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08