American Standard 7293.152 User manual

Exposed Wall Mount
Sink Faucet and Gooseneck Spout
ROUGHING-IN DIMENSIONS
M968264 REV. 1.5 (3/16)
Certified to comply with ANSI A112.18.1M
7293.152
7293.252
7293.252F15
171mm (6-3/4")
229mm (9")
FINISHED WALL
203mm (8")
70mm to 83mm
(2-3/4 to 3-1/4")
1/2" NPT
(FEMALE)
60mm Dia.
(2-3/8")
3mm (1/8")
ECCENTRIC
ROUGH-IN
1
Prepare water supply lines per "Roughing-in
Dimensions". Install 1/2" NPT. SUPPLY NIPPLES
1/2"NPT.
FEMALE
THREADS
FINISHED
WALL
1/2"NPT.
SUPPLY NIPPLE 1/2"to 1"
1-1/4"DIA.
OPENING
Installation
Instructions
Plumbers' Putty or Caulking
Adjustable Wrench Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.

SERVICE
4
To change direction of handle rotation, proceed as follows:
Turn HANDLE to OFF position.
Remove HANDLE SCREW and HANDLE.
Remove SPRING CLIP (1).
Lift STOP WASHER (2), turn 90°and replace.
Replace SPRING CLIP (1).
Replace HANDLE and HANDLE SCREW.
AERATOR may accumulate dirt causing distorted and reduced water flow.
Remove AERATOR and rinse clean.
If spout drips, operate handles several times from OFF to ON position.
Do not force - handles turn only 90°.
90°
FINISH INSTALLATION
Apply thread sealant or teflon tape to SUPPLY NIPPLES (1).
Slide COUPLING NUTS (2) onto INLET SHANKS (3).
Thread ESCUTCHEONS (4) fully onto INLET SHANKS (3).
Thread INLET SHANKS (3) onto SUPPLY NIPPLES (1). Distance
between INLET SHANK (3) outlets must be 8" to match the VALVE (5).
Insert RUBBER WASHERS (6) into INLET SHANK (3).
Attach VALVE (5) to INLET SHANKS (3).
Tighten both COUPLING NUTS (2) firmly.
2
Remove AERATOR (1).
Turn HANDLES TO OFF POSITION.
Slowly turn water supplies on and check all connections for leaks.
Operate HANDLES to flush water lines thoroughly.
Turn HANDLES to OFF position and replace AERATOR (1).
Thread ESCUTCHEONS against finished wall.
TEST FAUCET
3
8"
13/32"
1
1
1
2
2
3
4
5
6
M968264 REV. 1.5 (3/16)

M968264 REV. 1.5 (3/16)
7293.152
7293.252
7293.252F15
M962962-0020A
FEMALE ECCENTRIC SHANK KIT
994053-0070A
CARTRIDGE
012254-0020A
HANDLE SCREW
012245-0020A
METAL HANDLE
012244-0070A
SPOUT SEALS
066111-0020A
(2.2 GPM) AERATOR
M922880-0020A
(1.5 GPM) AERATOR
060353-0020A
PORCELAIN LEVER HANDLE
012182-002220A (2.2 GPM)
SPOUT
012182-002150A (1.5 GPM)
SPOUT
CHROME 002
Appropriate finish code
MODEL NUMBER
Exposed Wall Mount
Sink Faucet with Gooseneck Spout
5
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
Product names listed herein are
trademarks of AS America, Inc.
© AS America, Inc. 2016