American Standard Standard Collection Elongated Toilet... User manual

K47
© 2008 AS America Inc.
Standard Collection®
RIGHT HEIGHT™
ELONGATED TOILET
VITREOUS CHINA
To Be Specied:
❏ Color:
❏ White ❏ Linen
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
483mm
(19)
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2) CTRS
425mm
(16-3/4)
152mm (6)
381mm (15)
273mm
(10-3/4)
838mm
(33)
C/L OF SUPPLY
AS REQUIRED
FINISHED
FLOOR
13mm (1/2)
89mm (3-1/2)
305mm
(12)
438mm
(17-1/4)
* 152mm (6)
* 203mm
(8)
C/L OF OUTLET AND
TOILET MTG BOLTS
743mm
(29-1/4)
216mm
(8-1/2)
25 ± 6mm (1 ± 1/4)
FINISHED WALL
C/L
400mm
(15-3/4)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Standard Collection® RIGHT HEIGHT™
ELONGATED TOILET
❑ 2474.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 12" (305mm) rough-in
• Elongated bowl
• Close-coupled tank
• AquaForce ushing technology
• 16-1/2" rim height for accessible applications
• Chrome trip lever matches Standard Collection
faucets and accessories
• Includes design-matched molded wood
seat (5725.064)
• 2 bolt caps
• 100% factory ush tested
❑ 3264.016 Bowl
❑ 4396.016 Tank
Nominal Dimensions:
743 x 438 x 838mm
(29-1/4" x 17-1/4" x 33")
Fixture and seat only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08