American Standard Williamsburg 0554.700 User manual

© 2003 American Standard Inc.
WILLIAMSBURG™
COUNTERTOP SINK
VITREOUS CHINA
WILLIAMSBURG COUNTERTOP SINK
• Vitreous china
• Self-rimming
• Front overflow
• Supplied with cutout template
• Faucet ledge (faucet not included)
❏0558.700 Faucet holes on 8” (203mm) centers
❏0554.700 Faucet holes on 4” (102mm) centers
(illustrated)
Nominal Dimensions:
24-1/2" x 18" (622 x 457mm)
Bowl sizes:
17" (432mm) wide,
10-1/2" (267mm) front to back,
5-1/2" (140mm) deep
Compliance Certifications -
Meets or Exceeds the Following
Specifications:
• ASME A112.19.2M for Vitreous China
Fixtures
To Be Specified
❏Color:
❏Faucet*:
❏Faucet Finish:
❏Supplies:
❏1-1/4" Trap:
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED
WITH SINK.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided pages.
* See faucet section for additional models available
FINISHED WALL
OR SPLASHBACK
102mm
(4)
616mm
(24-1/4)
OPTIONAL
183mm
(7-3/16)
67mm
(2-5/8)
457mm
(18)
C/L
COUNTER (BY OTHERS)
FINISHED FLOOR
203mm
(8)
1-1/4 O.D
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
248mm
(9-3/4)
19mm
(3/4)
343mm
(13-1/2)
SEALING
COMPOUND
178mm
(7)
178mm
(7)
*
*
787mm (31)
857mm (33-1/4)
857mm
(33-1/4)
70mm
(2-3/4)
610mm
(24)
152mm
(6)
MAX.
BARRIER FREE
CLEARANCE
686mm
(27)
MIN.
203mm
(8)
MIN.
229mm
(9)
MIN.
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USEABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 70mm (2-3/4") minimum from front edge
of countertop provides 686mm (27") knee clearance
area.
BARRIER FREE