American Standard Sebring 0573.000 User manual

J35
BARRIER FREE
© 2008 AS America Inc.
SEBRING™
COUNTERTOP SINK
VITREOUS CHINA
SEBRING™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Center drain outlet
• Front overow
❏ 0573.000 Oval sink without faucet deck
Nominal Dimensions:
464mm x 381mm
(18-1/4" x 15")
Bowl sizes:
400mm (15-3/4") wide
311mm (12-1/4") front to back
140mm (5-1/2") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
FINISHED
WALL
OR
SPLASH BACK
178mm
(7)
381mm
(15)
38mm
(1-1/2)
MIN.
51mm
(2)
MIN.
B
A
C/L
464mm
(18-1/4)
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
165mm
(6-1/2)
178mm
(7)
16mm
(5/8)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
SUPPLIES
AS REQ'D.
305mm
(12)
*
254mm
(10)
*
FINISHED
FLOOR
787mm
(31)
SUGGESTED
FITTING
CENTER-SET
SPREAD
A
27mm(1-1/16)
32mm(1-1/4)
B
102mm(4)
203mm(8)
Revised 2/08
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.