American Standard Trap Standards 7798.020 User manual

M37
© 2008 AS America Inc. Revised 12/03
TRAP STANDARDS
ENAMELED CAST IRON
TRAP STANDARDS
❏ 7798.020 2" iron pipe with cleanout plug
and strainer
❏ 7798.030 3" iron pipe with cleanout plug
and strainer
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixture
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
267mm
(10-1/2)
51mm
(2)
SEAL
127mm
(5)
2.882 X 11-1/2
381mm
(15)
108mm
(4-1/4)
152mm
(6)
DIA.
117mm
(4-5/8)
DIA.
3mm
(1/8)
MAX. 25mm (1)
MIN. 8mm (5/16)
102mm
(4)
WASHER
3 N.P.T. INSIDE THREADS
FOR 7798.030
2 N.P.T. INSIDE THREADS
FOR 7798.020
67mm(2-5/8) SEAL
WHEN OUTLET
THREADED 51mm(2)
C/L OF OUTLET
FINISHED
FLOOR
REMOVABLE PERFORATED GRID
7798.020 / .030 IS FOR ENAMELED IRON SERVICE SINK

M38
© 2008 AS America Inc.