Ameriwood HOME TYLER 2795013COM User manual

B342795013COM
00GO
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Date of Purchase ___ / ___ / ___
Lot Number:
2795013COM
TYLER TOY STORAGE WITH DRAWERS
Tube
You
Assembly Difficulty Meter
Easy Tough

Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
ameriwoodhome.com
2
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 0.5-1 HOUR
Contact Us!
Helpful Hints
Tube
You

P
Quick
Tip
Assembly
P
P
P
ameriwoodhome.com
3
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You

Board Identification
Not actual size
ameriwoodhome.com
4
AC
LEFT SIDE PANEL
T2795013020GO
QTY: 1 PC
RIGHT SIDE PANEL
T2795013030GO
QTY: 1 PC
D
TOP
T2795013010GO
QTY: 1 PC
PARTITION
T2795013040GO
QTY: 2 PCS
E
RAIL
T2795013050GO
QTY: 1 PC
LOWER PARTITION
T2795013060GO
QTY: 1 PC
F
G
BOTTOM
T2795013070GO
QTY: 2 PCS
CENTER SHELF
T2795013080GO
QTY: 1 PC
BACK PANEL
T2795013090GO
QTY: 1 PC
B
Tube
You
H
I

Board Identification
Not actual size
ameriwoodhome.com
5
Tube
You
LEFT FRONT DRAWER
T2795013100GO
QTY: 1 PC
J
RIGHT FRONT DRAWER
T2795013110GO
QTY: 1 PC
K
LEFT SIDE DRAWER
T2795013120GO
QTY: 2 PCS
L
RIGHT SIDE DRAWER
T2795013130GO
QTY: 2 PCS
M
BACK PANEL DRAWER
T2795013140GO
QTY: 2 PCS
N
BOTTOM PANEL DRAWER
T2795013150GO
QTY: 2 PCS
O

Board Identification
Not actual size
ameriwoodhome.com
6
Tube
You
A
K
J
L
L
M
M
O
O
N
N
G
G
F
B
C
H
D
D
I
E

Part List
ameriwoodhome.com
7
Hardware Bag Reference number:
22795013COM0GO
Actual Size
×30 ×16 ×12
CAM LOCK
TGO2100
WOOD DOWEL
TGO2903 SCREW
TGO1008
Ø1.7 x 18mm
×33
NAIL
TGO6517
Ø6 x 30mm
Ø15 x 10mm
13
5
Tube
You
×30
Ø6 x 25mm
CAM BOLT
TGO2001
2
x1
Ø4.2 x 13mm
SCREW
TGO1304
×1
SCREW
TGO1314
Ø4.2 x 28mm
Not Actual Size
×1
9
WALL ANCHOR
TGO6501
Ø6 x 30mm
×1
10
WALL BRACKET
TGO3502
30x50x20mm
Ø4.2 x 45mm
4
x24
Ø3.5 x 12mm
SCREW
TGO1007
6 7 8
×2 set
11
14"
11-1 11-2
left cabinet member
left drawer member
12 ×2 set
12-1 12-2
right cabinet member
right drawer member
METAL SLIDE
TGO4514
14"

ameriwoodhome.com
STEP
8
1
1.1 Cam bolt (2) into (A) as illustrated.
1.2 Insert (3) into (D), (E) and (G) as illustrated.
1.3 Attach (10) into (A) with (7) as illustrated.
Tube
You
×8
23 ×10 ×1 7
7
10
×1
10
A
2
E
D x 2 G x 2
3

ameriwoodhome.com
STEP
10
3
3.1 Insert (3) into (B), (C) as illustrated.
3.2 Cam bolt (2) into (B), (C) as illustrated.
3.3 Attach (11-2) into (B) with (6) as illustrated.
3.4 Attach (12-2) into (C) with (6) as illustrated.
Tube
You
×8
23 ×2
B
C
2
B
C
×1
×1
11-2 12-2
x6
6
11-2
12-2
12-2
11-2
6 6 6 6 6 6
3
6

ameriwoodhome.com
STEP
9
2
2.1 Cam bolt (2) into (F) as illustrated.
2.2 Attach (11-2), (12-2) into (F) with (6) as illustrated.
Tube
You
×4
2
Left
surface
FF
FF
Right surface
Left
surface
Right surface
12-2
11-2
6 6 6
6 6 6
6
11-2
12-2
2
×1
×1
11-2 12-2 x6
6

ameriwoodhome.com
STEP
11
4
4.1 Cam bolt (2) into (H) as illustrated.
4.2 Attach (D) into (H) with (4) as illustrated
Tube
You
D
D
H
H
4 ×4
4
FINISHED EDGE
FINISHED EDGE
×2
2
2

ameriwoodhome.com
STEP
12
5
5.1 Attach (F) into (H) with (1) as illustrated.
5.2 Attach (F) into (G) x 2 with (1) as illustrated.
Tube
You
1 ×6 Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
1
1
D
D
D
D
H
H
G
G
F
FINISHED EDGE
FINISHED EDGE
F

ameriwoodhome.com
STEP
13
6
Tube
You
E
H
G
G
B
C
1
6.1 Attach (E), (H) and (G) into (B), (C) with (1) as illustrated.
1 ×8 Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
D
D
F
FINISHED EDGE

ameriwoodhome.com
STEP
14
7
Tube
You
Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
7.1 Attach (A) into (B), (C), (D) and (E) with (1) as illustrated.
1 ×8
E
D
D
B
C
A
FINISHED EDGE 1

ameriwoodhome.com
STEP
15
8
Tube
You
8.1 Attach (I) into (A), (B), (C) and (G) with (5) as illustrated.
5
×33
A
B
CI
G5

ameriwoodhome.com
STEP
16
9
9.1 Cam bolt (2) into (J), (K) as illustrated.
9.2 Insert (3) into (L), (M) as illustrated.
Tube
You
Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
JK
×8
2
2
L x 2 M x 2
3 ×4
3

ameriwoodhome.com
STEP
17
10
Tube
You
10.1 Attach (L), (M) into (J) with (1) as illustrated.
10.2 Attach (O), (N) into (M), (L), (J) with (4) as illustrated.
10.3 Attach (11-1) into (L) with (6) as illustrated.
10.4 Attach (12-1) into (M) with (6) as illustrated.
M
L
J
J
O
M
L
N
N
M
L
4 ×4
×1 ×1
11-1 12-1
x6
6
6
6
6
6
6
6
6
11-1
12-1
12-1
4
1 ×4 Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
1
11-1
O

ameriwoodhome.com
STEP
18
11
Tube
You
11.1 Attach (L), (M) into (K) with (1) as illustrated.
11.2 Attach (O), (N) into (M), (L), (K) with (4) as illustrated.
11.3 Attach (11-1) into (L) with (6) as illustrated.
11.4 Attach (12-1) into (M) with (6) as illustrated.
M
L
K
K
O
M
L
N
N
M
L
4 ×4
×1 ×1
11-1 12-1
x6
6
6
6
6
6
6
6
6
11-1
12-1
12-1
4
1 ×4 Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
1
11-1
O

ameriwoodhome.com
STEP
19
12
STUD
Hole
Option 2
Option 1
WALLBOARD
For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate
anchors to securely attach the safety bracket
×1 ×1
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest
drawers
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restarints may only
reduce, but not eliminate the risk of
tipover
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket (10) aligned in this
location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety bracket (10)
into the stud. Drive the screw (8) through the safety bracket (10) into the wall stud. Tighten the screw (7) that was not fully
tighened in step 1.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket (10), then move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor (9) into the hole until it is flush. Move your unit into
location and fasten the wall bracket (10) to the wall anchor (9) with the screw (8).Tighten the screw (7) that was not fully
tightened in step 1.
10
9
9
7
Tube
You
8
8

ameriwoodhome.com
STEP
20
13
Tube
You
13.1 Push the Drawer (J), (K) into the dresser as illustrated
J
K
Cabinet Slide
drawer slide