Ameriwood 5943220T User manual

B345943220T00
>> assembly instructions
Modern
3 drawer dresser
style # 5943220T (Espresso)
style # 5943306T (White)
DPCI # 249-05-0490 (Espresso)
DPCI # 294-05-0486 (White)
TM

Congratulations on your latest Target purchase.
Now what? Don't start sweating over the box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your
room in no time. Good luck--- though we're confident you won't need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order
missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly. Please do not use power tools.
tools needed
2

3
table of contents
introduction
hardware
parts list
how to use the cam lock system
assembly
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number
ready when calling.
2
4
5-6
7
8-28

4
hardware
(1) x16
cam lock
#A22570
(2) x16
cam bolt
#A22510
(3) x8
wood dowel
#A21660
(4) x6
connector housing
#A22900 (white)
#A22920 (black)
(5) x6
connector bolt
#A22910
(12) x6
drawer bracket
#A54223
(7) x18
#6x1-1/4" flat head screw
#A11600
(8) x12
#8x7/16" pan head screw
#A12120
(6) x28
nail
#A21110
(9) x4
#8x1-3/4" pan head screw
#A13410
(14) x3
slide set
#A56750 (black)
#A56760 (white)
(11) x30
#6x 7/16" flat head screw
#A11080
(13) x1
safety bracket kit
#A84050
14a
14b
14c
14d
13a
13b
13c
13d

Parts List DESCRIPTION
PART NUMBER
QTY
ITE LEFT PANEL
35943220010
1A RIGHT PANEL35943220020
1B TOP35943220030
1
CBOTTOM35943220040
1D BRACE359432200502
ESIDE BASE RAIL359432200602
FUPPER DRAWER FRONT35943220070
1
GDRAWER FRONT
35943220080
2
HLEFT DRAWER SIDEC1500370331010L3
RIGHT DRAWER SIDEC1500370331010R3
DRAWER BACKC1500704331510B3
DRAWER BOTTOM359433311203
DRAWER BRACE359430001303
MCENTER BASE RAIL
35943220160
1P BACK PANELK594300000
1
Parts shown are the base cabinet of your model. Please note,
most parts are labeled with a sticker or have a letter stamped
on a raw edge.
Parts F, M, P may not be labeled.
This piece is paperboard construction. It is not made from
wood but is required for assembly of your unit.
C
B
E
D
F
F
P
A
GH
MM
upper drawer drawer
5943220T (Espresso) PARTS LIST
5
back
panel
drawerbottom
drawerbottom
drawerback
drawerback
left
drawer side
left
drawer side
right
drawer side
right
drawer side

Parts List DESCRIPTION
PART NUMBER
QTY
ITE LEFT PANEL
35943306010
1
ARIGHT PANEL35943306020
1B TOP35943306030
1C BOTTOM35943306040
1D BRACE
359433060502
ESIDE BASE RAIL359433060602
FUPPER DRAWER FRONT35943306070
1G DRAWER FRONT359433060802
HLEFT DRAWER SIDE
C1500370331010L3
RIGHT DRAWER SIDEC1500370331010R3
DRAWER BACK
C1500704331510B3
DRAWER BOTTOM359433311203
DRAWER BRACE359430001303
MCENTER BASE RAIL35943306160
1P BACK PANELK594300000
1
A
P
F
F
D
E
B
C
Parts shown are the base cabinet of your model. Please note,
most parts are labeled with a sticker or have a letter stamped
on a raw edge.
Parts F, M, P may not be labeled.
This piece is paperboard construction. It is not made from
wood but is required for assembly of your unit.
GMH
drawer
upper drawer
5943306T (White) PARTS LIST
6
back
panel
left
drawer side
drawerback
drawerbottom
right
drawer side
drawerback
drawerbottom
right
drawer side
left
drawer side
M

7
how to use the cam lock system
2
3
½ turn to fully
lock.
4
Tighten to fully seat. Do not over
tighten. Proper orientation of cam.
1
Lock
Titus
Titus
Titus

1
step
8
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.
Proper orientation of CAM LOCK
(1) x2
cam lock
(3) x2
wood dowel (11) x9
#6x7/16" screw (14) x3
left cabinet slide
(2) x2
cam bolt
A
1
1
2
2
3
3
11
11
11
11
11
11
11
11
11
14a
14a
14a
14a
14a
11
2
finished edge
marked with an "L"

2
step
9
Proper orientation of CAM LOCK
(1) x2
cam lock (2) x2
cam bolt (3) x2
wood dowel (11) x9
#6x7/16" screw (14) x3
right cabinet slide
B
1
1
2
2
3
3
11
11
11
11
11
11
11
11
11
14b
14b
14b
14b
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.
finished edge
marked with an "R"
211
14b

3
step
10
(2) x4
cam bolt
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.
(13) x1
bracket & screw
(safety bracket kit)
finished edge
C
2
2
2
2
13a
13a
13b
13b
do not tighten screw (13b)

4
step
(5) x6
connector bolt
11
D
55
5
5
5
5

5
step
x2
12
(1) x4
cam lock
(3) x4
wood dowel
1
1
3
3
E
1. Refer to page 7 for instructions on how to use the cam lock system.

6
step
13
(9) x2
#8x1-3/4" pan head screw
1. Finished edges will face down.
finished edge
finished edge
9
9
A
D
Note: These edges will be flush with each other.

7
step
UNLOCK LOCK
14
D
A
E
E
finished edge
1. Refer to page 7 for instructions on how to use the cam lock system.
finished edge
finished edge
x2

8
step
15
(9) x2
#8x1-3/4" pan head screw
UNLOCK LOCK
9
A
B
D
E
E
1. Attach the right panel (B) to braces (E) first.
2. Refer to page 7 for instructions on how to use the cam lock system.
finished edge
raw edge
x2

9
step
16
UNLOCK LOCK
A
B
E
C
1. Refer to page 7 for instructions on how to use the cam lock system.
finished edge
x4

10
step
17
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
(6) x28
nail
Attach the back panel so that the
bottom edge is even with the bottom (D)
and aligned side to side.
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
D
back
panel

11
step
18
(1) x2
cam lock
(2) x2
cam bolt (4) x6 connector housing You will need to tap the connector (4) with a hammer
to fully insert. Be sure the connector is positioned as
shown before pushing into holes.
x2
FP
1. Screw-in cam bolts must be screwed down flush.
2. Refer to page 7 for instructions on how to use the cam lock system.
Proper orientation of CAM LOCK
1
1
2
4
4
4
4

12
step
19
UNLOCK LOCK
1. Refer to page 7 for instructions on how to use the cam lock system.
P
F
F
x2

13
step
Turn connector screw
clockwise to lock in place.
D
F
F
P
20
x6