TUMBLE DRYER QUICK START GUIDE WTP 489 031 IO-WMS-3009 (EN)
11.2022./1
1. Top
2. Control Panel
3. Door
4. Base
5. Base access opening
6. Ventilation grates
7. Adjustable feet
8. Bottom cover
9. Name Plate
10. Lint lter
11. Drawer cover
8. Time drying button
9. Drying level
10. Delay start
11. Anti-Crease
12. Start/Pause button
10+11. Child Lock
Dear Customer,
This Quick Start Guide is enclosed with detailed dryer
operating instructions. Before using the appliance carefully
read the Operating Instructions, especially guidelines for
safe use.
Level the appliance before connecting it to a wall socket.
Do not start the dryer before it is properly set up.
Only dry delicate fabrics, synthetics, wool using
designated programs. Only load such fabrics according a
table of the maximum load sizes (see page 2).
The correct tumble dryer operation extends its lifetime
so make sure the drum seal is dry (leave the door ajar
after drying). Do not clean your tumble dryer with harsh or
abrasive detergents.
Before drying1
Spin the laundry in the washing machine before tumble
drying. The high spin speed can reduce the drying time
and save energy.
To make sure the drying results are uniform, sort the
laundry by fabric type and drying programme. Before
the drying close the locks, hooks and buttons, fasten
the belts, etc.
Do not over-dry clothes, as they can easily crease. Do
not dry rubber and elastic materials.
To prevent skin scalding caused by steam or hot
appliance components, only open the door after
the drying programme has been completed. To
avoid extended drying cycles and increased energy
consumption, clean the appliance lters after each use.
Do not dry clothes after dry cleaning.
Select the correct programme to refresh woollen
clothing to make the fabric fresh and uy.
Programme selector knob2
Use the programme selector knob to select the
desired drying programme
Selectable functions: [Delayed start], [Drying
level], [Delicates], [Anti-Crease].
Touch
Start a programme3
The Start / Pause indicator will ash when you
select a programme. To start the programme,
press the Start / Pause button. The Start /
Pause indicator indicates that the programme
has started and the drying indicator lights up.
If you open the door while the programme is
running, the appliance switches to standby. To
resume the programme, close the door and
press the Start / Pause button.
Do not open the door while the programme is
running. If you need to open the door, do not
keep it open for a long time.
End programme4
At the end of the programme, the Start / Pause,
water container full, clean the lint lter and clean the
heat exchanger indicators will light up.
You will also hear a beep when the programme
ends.
You can remove the laundry and prepare the
appliance for a new cycle.
1
2
3
4
5
6
7
8
9
10
11
4
8 9 10 11 12
10 + 11
