Amigo AeroTow T2 User manual

AeroTow T2
User manual
Are you ready to go?
989-777-0910 AmigoAeroTow.com

To connect the tug to the aircraft, move the tug close to the front
wheel. Approach at a slight angle so that the (1) static connector
lines up with the tire, then swing the tug right so that the (2)
locking connector lines up with the tire.
Return to the handle of the tug and tighten the (3) locking lever
located on the right side of the handle bar to secure the (2)
connector to the aircraft. This will lock both adapters onto the
aircraft so you are able to safely operate the tug.
|Connecting your aircraft
Static connector, always approach the aircraft with a
slight angle, favoring the static connector.
1
Locking connector.
2
Locking lever.
3
11
22
33

Check the surrounding area, and remove any obstacles or
obstructions before moving your aircraft, remove chocks.
Return to the handle of the tug.
Turn power on and move your aircraft using the reverse / forward
switch located on the front of the handle control box.
Chock your aircraft.
Unlock the locking lever and pull the tug away slightly left to
detach the locking connector rst.
Reverse the tug away from the aircraft.
|Moving your aircraft
|Disconnecting your aircraft
You’re ready to go!
|Handle controls
AA
BB
A. T2 power on / off
B. Press in for forward / reverse

T2 Weight
Unit weight is 225 lbs
Drive train
200 watt / .26 hp
drive

Battery & Charger
x2 12V, AGM batteries.
1 / 2 / 4 amp selectable
charger

Max tow capacity
6,000 lbs on level
ground
Controls
Electric, forward /
reverse.
Power, on / off
Tires
18” x 8” x 8.5”
|Precautions
|Specs
As the operator, you are fully responsible for the safe
operation of the tug and any damage done to the aircraft or
hangar due to operation errors.
1
Familiarize yourself with the throttle and speed response of
the tug before attaching your aircraft. The tug does not stop
immediately, this is intentional to protect your aircraft from
damage.
2
Aircraft should never be moved on any type of uneven,
sloping or hilly terrain.
3
Store the tug in a dry location when not in use.
4
Always turn the tug off while not in use. The tug will
automatically turn off after 10 minutes. Toggle the power
switch to turn on.
5
Leave the tug plugged in while not in use. The smart charge
feature will prevent damage to the battery.
6
Extreme cold can negatively impact the batteries, but climate
control is not necessary in most circumstances.
7