AML LDX10 User manual

Power Button
LDX10 Batch Data Collection Handheld
Quick-Start Guide
Getting StartedGetting Started Getting Started
Physical Features 24-key Keypad
1Charge the LDX10 for 6 hours 2Starting up the LDX10 3Download DC Console
800.648.4452
www.amltd.com
01132017-1
Power and Reboot Procedures
Use the USB cable and the optional adapter
to charge from a 110VAC wall outlet.
Download the DC Console utility at
www.barcodepower.com
Scan Key
Power
Button
LCD
Scan Engine
Window
USB Port
T9 Keypad
Utilize DC Console to
quickly modify existing
applications or create
new ones and transfer
files from your LDX10 to
your PC.
• If left idle for 30 minutes, the LDX10 will automatically
power down.
•Pressing the power button briefly, while the unit is on,
will either put the LDX10 into suspend mode, or wake it up
depending on its current state.
•Pressing and holding the power button for more
than 3 seconds causes the LDX10 to power off.
•Pressing the power button while the
LDX10 is OFF powers up and
re-boots the unit.
• While charging, the LDX10 display
will go dark after a time set in the
‘Display Properties’ settings in
Windows® Control Panel. Touching
the screen or any key will awaken it
from this idle state.
Bottom
Top
Note: Microsoft ActiveSync works only with
Windows®XP or earlier.
Note: The Windows Mobile Device Center is only
supported on Windows Vista™or later.
IMPORTANT!
Users must install either Microsoft®ActiveSync®
or Windows®Mobile Device Center®before
installing AML DC Console.

DC Suite Software
SupportAccessories
DC Suite Software DC Suite Software
Protective Cases Learn More About the LDX10 at:
Warranty Agreements
Red
(Standard)
Black
Orange
Yellow
Blue
Green
The LDX10 comes with
a suite of pre-installed
applications as a part
of our DC Suite. These
applications were
developed for
common data
collection tasks and
are ready to go right
out of the box.
www.amltd.com/ldx10
SVC-EWLDX10
SVC-EWPLDX10
Extended Warranty, 3 year, LDX10
Extended Warranty PLUS, 3 year,
LDX10
For DC Suite downloads and support visit:
www.barcodepower.com
Simple one-field
scanning.
Scan in Item
Number and
the unique
Serial Number.
Check-In/Out application for
tool or part rooms.
Scan the Item
Number and
then collect
Lot Number
and Quantity
information.
Dashboard
All applications are
launched from here.
As future
applications are
developed, they will
be made available
on the web at
barcodepower.com.
Scan the Item
Number and
key in the
Quantity.
Asset Tracking
application.
Compare two scans
and confirm that
they are the same
OR not the same.
© 2017 American Microsystems, Ltd. All rights reserved.
American Microsystems, Ltd. reserves the right to make
changes in specifications and other information contained
in this document without prior notice, and the reader
should in all cases consult American Microsystems, Ltd. to
determine whether any such changes have been made.
The information in this publication does not represent a
commitment on the part of American Microsystems, Ltd.
American Microsystems, Ltd. shall not be liable for technical
or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the
furnishing, performance, or use of this material. This
document contains proprietary information which is
protected by copyright. All rights are reserved. No part
of this document may be photocopied, reproduced, or
translated into another language without the prior written
consent of American Microsystems, Ltd.
2190 Regal Parkway
Euless, TX 76040
800.648.4452
www.amltd.com
www.barcodepower.com
Get Updates from AML
Don’t forget to register your product(s) online at
www.amltd.com/register to receive updates about
AML products and software.