amnimo AG10 User guide

Edge Gateway
Startup Guide

Table of Contents 2
Table of Contents
Table of Contents........................................................................................................................2
Introduction..................................................................................................................................4
Safety Precautions......................................................................................................................5
About Edge Gateway ..................................................................................................................6
Notes on Edge Gateway ........................................................................................................... 6
About This Manual......................................................................................................................7
Notes on This Manual .............................................................................................................. 7
List of Manuals.......................................................................................................................... 7
Icons and Symbols Used in This Manual............................................................................... 8
Confirmation of Included Items.................................................................................................9
Edge Gateway Set ..................................................................................................................... 9
Items Prepared by the Customer............................................................................................10
Our Separately-sold Accessories (Products) ...................................................................... 10
Items Prepared by the Customer .......................................................................................... 10
Overall Diagram of the System ...............................................................................................11
Step 1 Starting Up/Connecting ............................................................................................12
For indoor-type Edge Gateway.............................................................................................. 12
For outdoor-type Edge Gateway ........................................................................................... 14
Step 2 Signing in to Edge Gateway......................................................................................17
Changing the IP Address of a PC.......................................................................................... 17
Signing in for the first time .................................................................................................... 21
Signing in using the GUI................................................................................................................... 21
Signing in using the CLI ................................................................................................................... 23
Step 3 Configuring Edge Gateway......................................................................................27
If establishing a mobile connection...................................................................................... 27
Reasons why a connection test is required ................................................................................. 27
Flow of a connection test ................................................................................................................ 28
Configuring Simple Settings .................................................................................................. 38

Table of Contents 3
Setting the Time ...................................................................................................................... 45
Setting the time zone........................................................................................................................ 45
Setting the time ................................................................................................................................. 47
Setting SSH .............................................................................................................................. 50
Setting PPP .............................................................................................................................. 54
Configuring Storage Settings................................................................................................. 57
Saving Settings to Gateway................................................................................................... 60
Optional Configuration Guide..................................................................................................62
Connecting a Network Camera ...............................................................................................63
Configuring VMS .......................................................................................................................64
Installing a Desktop Client..................................................................................................... 64
Connecting to a Media Server ............................................................................................... 66
Setting an initial system................................................................................................................... 66
Connecting to the system you set.................................................................................................. 69
Checking devices............................................................................................................................... 71
Saving VMS Settings............................................................................................................... 74
Saving the Nx Witness password and settings ........................................................................... 74
Configuring Device Management System .............................................................................76
Registering Credentials .......................................................................................................... 77
Enabling Edge Gateway.......................................................................................................... 79
Configuring Enhanced Video Management System.............................................................81
Displaying Camera Images .................................................................................................... 81
Configuring remote.it................................................................................................................83
Creating a remote.it Account................................................................................................. 84
Configuring remote.it .............................................................................................................. 85
Connecting to the Service Using remote.it .......................................................................... 92
Licenses and Trademarks........................................................................................................95
Licenses.................................................................................................................................... 95
Trademarks .............................................................................................................................. 95
Revision history .........................................................................................................................96

Introduction 4
Introduction
Thank you for choosing our amnimo Edge Gateway (hereinafter referred to as "Edge Gateway").
This Startup Guide (hereinafter referred to as "this manual") explains how to set up Edge Gateway. Ensure
that you read this manual before using Edge Gateway.
Once you have completed the setup, keep this manual in a place where you can refer to it at any time.

Safety Precautions 5
Safety Precautions
Before using Edge Gateway, carefully read the "Before You Use" included in the package of Edge Gateway to
ensure safe and proper handling.

About Edge Gateway 6
About Edge Gateway
Notes on Edge Gateway
Edge Gateway does not guarantee backwards compatibility of product versions with respect to
configuration data.

About This Manual 7
About This Manual
Notes on This Manual
The contents of this manual are subject to change without notice.
Reproduction in whole or in part of this manual is prohibited without permission.
The information in this manual has been prepared with great care. However, if you have any doubt,
questions or find any error, please contact our Customer Support.
Contact: amnimo Customer Support
E-mail: [e-mail]
URL: https://support.amnimo.com/
Note that for changes to specifications, structure, and used parts where it seems that there are no
problems in terms of function or performance, they may not be revised on each occasion.
List of Manuals
amnimo G Series Edge Gateway User's Manual
https://amnimo.com/manual/edge_gw/en-us/edge_gw_users_manual.pdf
amnimo Gateway Series GUI User's Manual
https://amnimo.com/manual/edge_gw/gui/en-us/gui_users_manual.pdf
amnimo Gateway Series CLI User's Manual
https://amnimo.com/manual/edge_gw/cli/en-us/cli_users_manual.pdf
Nx Witness VMS Guide
https://amnimo.com/manual/edge_gw/vms/en-us/index.htm
Device Management System Manual
https://amnimo.com/manual/edge_gw/alpine/dms/en-us/index.htm
Enhanced Video Management System Manual
https://amnimo.com/manual/edge_gw/evms/en-us/index.htm
Edge Gateway Startup Guide (this manual)
https://amnimo.com/manual/edge_gw/sg/en-us/edge_gw_sg.pdf

About This Manual 8
Icons and Symbols Used in This Manual
The icons and symbols in this manual have the following meanings:
Provides informat
ion about features and operations that should be paid special
attention.
Provides additional information about features and operations.

Provides reference information in this manual or other documents.
Indicates that the command operation can be performed in general user mode.
Indicates that the command operation can be performed in administrator mode.
Indicates that the command operation can be performed in configuration mode.

Confirmation of Included Items 9
Confirmation of Included Items
First, confirm that all of the items are included in the box.
Edge Gateway Set
Indoor-Type Edge Gateway
Outdoor-Type Edge Gateway

Indoor-Type Edge Gateway main unit x 1
Before You Use x 1
Rubber foot x 4

Outdoor-Type Edge Gateway main unit x 1
Before You Use x 1
Grommet (for main unit) x 2
Cable Tie (for securing cables) x 2

Items Prepared by the Customer 10
Items Prepared by the Customer
To set up as described in this manual, it is necessary to prepare the following separately sold products.
Separately sold products are not covered under the Edge Gateway warranty.
Our Separately-sold Accessories (Products)
For specifications and standards, refer to the "amnimo G Series Edge Gateway User's Manual".
Indoor-Type Edge Gateway
Outdoor-Type Edge Gateway

AC adapter (DC 12 V/1 A)
Rod antenna x 2
External antenna x 2
If the rod antenna has poor sensitivity, you
may need an external antenna.
GPS antenna
Main unit fixing metal fittings
Console conversion (RJ-45 -D-sub 9-pin)
Direct current power cable

Rain-proof AC cable
3P-5m with round crimp terminals. Outer diameter
9.15 mm
Cable gland (for ethernet cables)
Compatible with wires with a diameter of 6-10 mm
Cable gland (for power supply only)
Compatible with wires with a diameter of 9-14 mm
Wall mounting metal fittings (stainless steel, set of
4)
Pole mounting metal fittings (stainless steel, set of
2)
Pole mounting bands (stainless steel, set of 2)
Items Prepared by the Customer
SIM card
Required for mobile connection.
For specifications and standards, refer to the "amnimo G Series Edge Gateway User's Manual".
PC for setting up
Required to configure various settings for Edge Gateway.
This document uses Windows 10 to explain the procedure.
LAN cable (recommended category: CAT5e or higher)
Required to connect Edge Gateway to a PC.

Overall Diagram of the System 11
Overall Diagram of the System
This manual explains how to set up a network using the following setting example.
Mobile connection
Connect to the Internet using a SIM.
WAN connection
Connect to the Internet using the eth0 interface.
LAN connection
Connect to a private network using the LAN0 to 3 interfaces.
Factory-default network settings
eth0：dhcpv4
lan0:
lan1:
lan2:
lan3:
br0: 192.168.0.254/24
- lan0/lan1/lan2/lan3

Step 1 Starting Up/Connecting 12
Step 1 Starting Up/Connecting
This step explains how to start up Edge Gateway.
For indoor-type Edge Gateway
1Insert the SIM card you want to use into the back of Edge Gateway.
Insert the SIM card so that its contact faces inside.
2Connect the LAN0 port on Edge Gateway to the PC using a LAN cable.
Power outlet
AC
adapter
Micro SIM
card
LAN cable

Step 1 Starting Up/Connecting 13
3Set the DIP switches for configuration on the front of Edge Gateway to Linux startup mode.
Description of the DIP switch icons
DIP switch
Description
ON status
OFF status
The DIP switch No.4 may be either ON or OFF. It is not referred by the boot loader. (Used
only on the application side.)
4Connect the AC adapter to Edge Gateway.
The power is automatically turned on and Edge Gateway starts up.

Step 1 Starting Up/Connecting 14
For outdoor-type Edge Gateway
1Insert the SIM card you want to use for Edge Gateway and connect the PC to the LAN0 port on Edge
Gateway using a LAN cable as shown in the following figure.
Insert the SIM card so that its contact is on the bottom.
2Set the DIP switches for configuration on top of Edge Gateway to Linux startup mode.
LAN cable
Micro SIM card

Step 1 Starting Up/Connecting 15
Description of the DIP switch icons
DIP switch
Description
ON status
OFF status
The DIP switch No.4 may be either ON or OFF. It is not referred by the boot loader. (Used
only on the application side.)
3Connect the AC power cable to Edge Gateway.
Turn on the power switch and start up Edge Gateway.
Refer to the "Installation Guide for Outdoor Type (Edge Gateway/IoT Router)" included with the
product for details.
AC power cable
Power switch

Step 1 Starting Up/Connecting 16
Shutting down Edge Gateway
You can shut down Edge Gateway using one of the following methods. The LED PWR blinks during shutdown.
Once the LED PWR lights up red, shutdown is complete.
Turn off the power by pressing the push switch on the main unit with a thin and sharp-tipped object for
at least 3 seconds during startup.
Indoor-Type Edge Gateway
Outdoor-Type Edge Gateway
Shut down using the following commands:
For information on using the commands, refer to the "Edge Gateway Series CLI User’s Manual".
admin@amnimo:~$ sudo systemctl poweroff 
[sudo] password for admin: ←Enter the root password and press the [ Enter ] key
Stopping Docomo of user admin.
Stopping Unpack initramfs on shutdown...
(Omitted)
[ OK ] Reached target Shutdown.
Starting Power-Off
NOTICE: You can turn off the power.
LED display during shutdown process
Item
PWR
ANT
MOB
ST1
ST2
ST3
Remarks
Shutdown is processing
125 ms intervals
State in which the device
can be powered off
Precautions regarding the autostart feature
Since Edge Gateway is intended to operate 24 hours a day, it has the function to automatically
recover from a shutdown when a failure occurs, etc.
Therefore, even if you shut down Edge Gateway as explained in this section, it will restart as
long as power is supplied from a power connector.
If you want Edge Gateway to be powered down, shut it down and make sure the LED is in a
power-off state (the power LED lights in red), and pull out the power plug.
PUSH
Switch
PUSH
Switch

Step 2 Signing in to Edge Gateway 17
Step 2 Signing in to Edge Gateway
This step explains the procedure for signing in to Edge Gateway using the GUI
(Graphical User Interface) or the CLI (Command Line Interface).
Changing the IP Address of a PC
To sign in to the GUI settings screen, Edge Gateway and the PC must be on the same network. Change the
IP address of the PC so that it can be consistent with the IP address of Edge Gateway, "192.168.0.254".
This manual uses Windows 10 for descriptions.
In this document, the IP address of the PC is changed to "192.168.0.10" so that it can be
consistent with the IP address of Edge Gateway, "192.168.0.254".
1Click [ Network & Internet] in "Windows Settings".

Step 2 Signing in to Edge Gateway 18
2Click [ Network and Sharing Center].
3Click [ Change adapter settings].

Step 2 Signing in to Edge Gateway 19
4Right-click [Ethernet] and select [Properties] from the displayed menu.
5Select "Internet Protocol Version 4 (TCP/IPv4)" and click [Properties].
6Set the IP address.
❶Select [Use the following IP address].
❷Enter "192.168.0.10" in "IP address" and "255.255.255.0" in "Subnet mask".
❸Click [OK].

Step 2 Signing in to Edge Gateway 20
7Click [OK].
The IP address has been set.