AMP Research BedStep 75314-01a User manual

1/2 IM75300 rev 10.17.13
www.amp-research.com
Chevy Silverado / GMC Sierra
1500 2014
Torque wrench
18mm T25
20-03797-10
19-03783-90
18mm
19-03962-90 13mm
33 ft-lbs / 44 Nm
PART NUMBER:
AMP 75314-01A
19-03948-90 19-03961-90
19-03963-90
18mm 13mm
19-03901-90
19-03900-90
19-03377-90
11-03639-90
19-03901-90
1 2
3 4
Remove factory nuts
Install bracket to truck Torque nuts to
59 ft-lbs / 80Nm
Insert threaded bracket (19-03963-90) into bum-
per and assemble bracket (19-03961-90) with
supplied bolt. Use slotted end of bracket at
bolt.
Designed and manufactured by AMP Research®. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221;
7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents pending. Made in USA © 2009 AMP Research
Three-year limited warranty. Professional installation is recommended.
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST

2/2 IM75300 rev 10.17.13
www.amp-research.com
T25
13mm
Install bracket (19-03962-90) to upper bed panel. Slotted side will mount on bed panel. See im-
age for bracket orientation. Use provided bolts and nuts to mount and torque bolts to 16 ft-lbs /
22Nm
Install step pad. Offset pad to rearward position Torque 3 PT screws to 5 ft-lbs /6Nm
Note: Overtightening screws may
damage step pad.
5
67
8

Congratulations on the purchase of your
AMP RESEARCH BedStep®
Here’s what you should know...
OPERATION
The AMP Research BedStep®is foot operated and deploys and retracts with a nudge of your foot.
To deploy, press down using your left foot, on the foward outside corner of the step pad.
To retract, gently kick the underside of the step pad.
Max Load Capacity: 300lbs.
Always use appropriate hand holds when stepping up to or down from your truck’s cargo bed.
MAINTENANCE TIPS
The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or
sponge to dislodge any mud, dirt or accumulated road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor All®to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.
amp-research.com
LIMITED WARRANTY
WARNING
AMP RESEARCH warrants product to be free from defects in material and workmanship, for terms specied below, provided
there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replace-
ment of any item found by the factory to be defective within the time period specied.
If you have a warranty claim, rst you must call our factory at the number below for instructions. You must retain proof of
purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will
return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, re,
vandalism, negligence,
misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE
LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal
rights, and you may also have other rights that vary from state to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
Be sure to read and precisely follow the provided instructions when installing this product. Failure to do so could place the
vehicle occupants in a potentially dangerous situation. After installing or reinstalling, re-check to insure that the product is
properly installed.