XP95 Analogue Base Item Number: 201-0004
Installation guide
1
Description
The XP95 base has been designed to have a ‘one way
only’ fit.
By means of a unique, patented ‘XPERT card’ the
address information is held in the base while keeping
the base entirely free of electronic components. This
coded plastic card is inserted into the base, so that the
address remains the same, no matter how often the
detector is replaced by similar devices.
Installation
Observe anti-static precautions at all times
1. Wire as shown in Figure 1 and Figure 2 for
Common Remote LED
Notes
1. Polarity must be observed on detectors beyond
the one driving the remote indicator
2. The earth terminal is provided for easier
installation and is not required by the detector
head.