Amped Wireless APA2600M Operating and maintenance instructions

v082516
Indicates when the Access Point is powered on. The LED will remain on.
Blinks when Wi-Fi Protected Setup (WPS) is activated and the Access Point awaits a connection.
Blinks rapidly when data traffic is transmitted or received over the 5GHz wireless network.
Blinks rapidly when data traffic is transmitted or received over the 2.4GHz wireless network.
Indicates when the Access Point is connected to your network.
Indicates when a USB storage device is connected to the USB 2.0 and/or the USB 3.0 port.
Power:
WPS:
5.0GHz Wireless Activity:
2.4GHz Wireless Activity:
Network Connection:
USB Connection:
LED Indicator Information
Once you have completed the Setup Wizard, you
will now see the Dashboard when you access
http://setup.ampedwireless.com. You will not see
the Setup Wizard again. Through the Dashboard
you can further adjust settings and access the
features of the Access Point. Here you will find
features like Guest Networks, User Access Controls,
Wi-Fi Coverage Controls, Parental Controls and
many other features.
Dashboard
7Setup Summary
Congratulations, the Access Point is now
successfully configured and your settings are now
saved. You may now connect additional devices
directly to the 4 wired ports on the back panel or
connect wirelessly to the Access Point.
The Wizard will notify you if there is a newer
firmware for the Access Point. We recommend
that you upgrade at this time if an update
is available.
GOT QUESTIONS?
Phone: [phone] or 909-217-3168
Email: [email protected]
Web: www.ampedwireless.com/support
?
6Personalize your Wi-Fi Settings
The default ID of your 5GHz Wi-Fi network and
2.4GHz Wi-Fi network is: Amped_AthenaAP_5.0 or
Amped_AthenaAP_2.4
To change it, enter a new name in the SSID field. Users
connecting wirelessly to the Access Point will use these
IDs to identify your Wi-Fi networks.
The default Security Key of your Wi-Fi networks
is: wireless
To change them, enter a new key for both the 5GHz
and 2.4GHz Wi-Fi networks in the Security Key field.
The keys must be at least 8 characters long.
Create a Password for your Access Point
This password is NOT your Wi-Fi connection
password. This password is to access the web
menu of the Access Point to access additional AP
settings. Leave this blank if you do not wish to
have a password.
Click Apply to save your settings. The Access Point
will reboot. This process may take up to 1 minute.
The page will automatically reload after the count-
down. If it does not, you may need to refresh the
page manually or check your connection to the AP.
The Wizard will detect your network settings.
Please be patient.
Once the Wizard has configured your network
settings, you should see a green check mark.
Click Next to continue.
5Network Connection Detection
4Welcome to the Setup Wizard
If this is your first time setting up the Access
Point, the Setup Wizard should automatically
load.
Be sure the Access Point is connected to
your network.
Click Next to continue.
If the Dashboard loads (see left image), instead
of the Setup Wizard, scroll to the bottom and
click the Setup Wizard button to access the
Wizard.
3
Recommended browsers: Google Chrome, Safari or Internet Explorer (8.0 and up). Do not use Firefox.
http://setup.ampedwireless.com
Open your Web Browser
If the URL fails to open try: http://192.168.80.240
Enter the setup web address into your browser:
ACCESSING THE WEB MENU DOES NOT REQUIRE INTERNET ACCESS. THE MENU IS SERVED FROM THE ACCESS POINT.
2Connect your Computer to the Access Point
Wired Connections:
Scan for available wireless networks on your PC or
tablet and connect to one of the following networks:
Wireless Connections:
Attach any Wired Devices
to the Access Point using
an Ethernet cable.
NETWORK ID: Amped_AthenaAP_2.4
PASSWORD: wireless
NETWORK ID: Amped_AthenaAP_5.0
PASSWORD: wireless
- or -
Note: If your network uses static IP address assignments, you will need to manually configure the settings for
your Access Point. See the instructions on the back to access the configuration menu of the Access Point.
Attach the antennas to the antenna connectors
on the Access Point.
a
Connect a cable from the Access Point's
port to your Router’s local network
port (LAN) or network switch.
NETWORK
c
Attach the Power Adapter to the Access Point’s
port and plug it into a power outlet.
PWR
b
Connect the Access Point to your Router/Network
1
b
c
Modem Internet
Router
(LAN port)
a
Allow up to two (2) minutes for the Access Point
to automatically configure itself to your network.
RE AD FIRS T
SETUP GUIDE
GOT QUESTIONS?
Phone: [phone] or 909-217-3168
Email: [email protected]
Web: www.ampedwireless.com/support
APA 2600M
ATHENA-AP
HIGH POWERTM AC2600 WI-FI®ACCESS POINT

Amped Wi reless
A Divisi on of Newo Co rporation
Copyri ght © 2016 Am ped Wireless / Newo C orporat ion. All rights res erved.
Amped Wi reless, N ewo Corporation , the Amped W ireless Logo are re gistere d trademarks or tra demarks o f Newo Corporatio n.
If you continue to have issues setting up the Access Point, give us a call — we’re here to help: 888-573-8820 or 909-217-3168
Visit our website for more support information and answers to frequently asked questions: www.ampedwireless.com/support
v082516
Using the Features on the Access Point
The Access Point is equipped with many powerful security features through the web menu:
If you are unfamiliar or want more information on how to set up features, please refer to the User’s Guide
at http://support.ampedwireless.com/apa2600m.
12:26
Wireless Access Scheduling
Control when your Wi-Fi is on/off
Location: 2.4 or 5GHz Wi-Fi Settings > Access Schedule
User Access Control (MAC/IP)
Restrict network access to specific users
Location: Smart Features > User Access
Wireless Coverage Control
Adjust the distance of your wireless network
Location: 2.4 or 5GHz Wi-Fi Settings > Wireless Coverage
Web Menu (Left Side)
Setting a Static/Manual IP for your Access Point
If your network uses Static IP settings, you will need to set a static IP address for your Access Point. Go to
the More Settings > Network Settings menu from the navigation menu and select Disabled / Static IP from
the DHCP drop down menu. Next, enter the IP information as it relates to your network. Click Apply and the
Access Point will reboot.
Note: Accessing the web menu from http://setup.ampedwireless.com will no longer work when using a Static IP.
You will only be able to access the menu using the Static IP address assigned to the Access Point.
Share USB Storage Devices
1
2
3
Connect a USB storage device to the USB 2.0 and/or the USB 3.0 port.
Log onto the web menu at http://setup.ampedwireless.com and
click the USB Storage tab.
Follow the instructions for configuring the settings to share the USB storage device.
Power & LED Lights On/Off
•Power On/Off: Push button to quickly turn the Access Point on or off.
•LED Lights On/Off: Push button to turn the LED indicators on
the front of the Access Point on or off.
Additional Features
Reset the Access Point to Default Settings
There are two options to reset the Access Point back to factory default settings: USB 3.0
Storage Port
b
Reset Button a
LED Lights On/Off c
USB 2.0
Storage Port
b
Wired Ports d
Power On/Off c
1
2
Access the Reset button through the web menu on the left side under
More Settings > Management > Save/Reload Settings. Select the Reset
Settings to Default.
Access the physical Reset button on the back panel of the Access Point:
Hold down the Reset button for five to ten (5-10) seconds. You may need
to use a pen tip or pin to access the button. Pressing the Reset button for
less than five (5) seconds will simply reboot the Access Point while saving
your existing settings.
a
b
c
Wired Port LEDs
•Indicates when a device is connected to a wired port (modem or local network) on the back of
the Access Point. The LED will blink rapidly when wired data traffic is transmitted or received.
Green LEDs will light up when there is an active gigabit connection.
Wi-Fi Protected Setup (One-Touch Setup or Push Button Configuration)
If your Wi-Fi device has WPS one-touch setup, you can use it to connect to the Access Point:
iPad Tablet
Tap the "Home" button to get to the home page.
Tap the "Settings" app icon.
Tap on Wi-Fi to enter the iPad’s Wi-Fi settings.
Toggle the Wi-Fi "On/Off" selector switch to "On".
Under "Choose a Network," select:
Amped_AthenaAP_2.4 or Amped_AthenaAP_5.0
When prompted, enter the wireless security key:
"wireless"
Tap the "Apps" menu on the tablet screen.
Locate and tap the "Settings" app icon.
Under "Wireless & networks," tap "Wi-Fi settings".
Tap the Wi-Fi box to turn on Wi-Fi and scan.
Under "Wi-Fi networks," select:
Amped_AthenaAP_2.4 or Amped_AthenaAP_5.0
When prompted, enter the Password key: "wireless"
A.
B.
C.
D.
E .
F .
A.
B.
C.
D.
E.
F .
Android Tablet
Amped_RTA1750_5.0
Mac OS X
Click on the Wireless icon to see available wireless
networks. Select Amped_AthenaAP_2.4 or
Amped_AthenaAP_5.0 network. When prompted for
a password, enter "wireless".
Access the taskbar on the bottom right of your
screen, tap on the Wi-Fi icon, enable Wi-Fi, and select
Amped_AthenaAP_2.4 or Amped_AthenaAP_5.0.
When prompted for a password, enter "wireless".
Windows 10
How to Connect Wirelessly to the Access Point
Tap on your Settings icon, select Wi-Fi, and choose
the network, Amped_AthenaAP_2.4 or
Amped_AthenaAP_5.0. When prompted for a
password, enter "wireless".
iPhone
Swipe in from the right edge to access the charms
bar, tap on Settings, select the Wi-Fi icon, and select
Amped_AthenaAP_2.4 or Amped_AthenaAP_5.0.
When prompted for a password, enter "wireless".
Amped_AthenaAP
Network01
Network02
Windows 8
Hold down the WPS button on the Access Point (back panel) for 3 seconds. The Power LED will begin to blink.
As it blinks, push the WPS button on your wireless adapter or enable WPS with the provided software for your
wireless adapter. WPS will automatically configure the connection settings for your wireless adapter to connect
to the Access Point.
A.
B.
Connecting to the 5GHz network requires that you have a 5GHz capable network adapter.
Amped_AthenaAP_5.0
Amped_AthenaAP_5.0
Amped_AthenaAP_5.0
Amped_Athen...
Amped_Athen...
Troubleshooting Tips
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
PROBLEM:
SOLUTIONS:
I entered setup.ampedwireless.com and it failed to open the Web Menu.
a. Make sure your computer is connected to the Access Point wirelessly and NOT using a network cable.
Ensure the power is plugged in and on. Try to access the setup menu again.
b. Enter the following web address into your web browser instead of ‘setup.ampedwireless.com’:
http://192.168.80.240
c. Power off (unplug the power adapter) the Access Point and power it back on. Try again.
d. Reset your Access Point to default settings by holding the Reset button (located on the back panel) for
ten (10) seconds and try again.
e. If you are using a Static IP, you will need to enter the assigned IP address into the web browser to access the
web menu. When using a Static IP, the setup.ampedwireless.com shortcut will no longer work.
I do not have Internet access when connecting to the Access Point.
a. Your router or original network may not have Internet access. First check to see if you are able to access the
Internet by connecting directly with your router. If you cannot, there is a problem with your router that needs
to be fixed first. If you are able to access the Internet, continue with the following troubleshooting options below.
b. Your router may be using Static IP assignments. If so, you will need to configure a Static IP for the Access Point.
Connect your PC to the Access Point using an Ethernet cable. Disconnect your PC from any wireless networks
that it may be connected to. Access the web menu at setup.ampedwireless.com using a web browser. Access
the IP settings menu from the left hand navigation bar. Select ‘Disabled’ under the DHCP dropdown menu and
enter an IP address that matches your router’s IP settings.
My Access Point was working fine previously, but now I can no longer access the Internet through the Access Point.
a. The settings on your router’s network may have changed or you may have lost Internet connection on your home
router. Any changes to the DHCP settings of your home router may affect the Internet connection of the
Access Point. Check the settings on your router and try again.
b. Reboot the Access Point by unplugging the power adapter and plugging it back in. Allow up to 3 minutes
for the Access Point to reconfigure itself to your network. Check to see if your connection has been
re-established by viewing a website.
This is the second page of the Setup Guide. Start on the opposite side first.

Regulatory Document
APA2600M
ATHENA-AP
HIGH POWERTM AC2600
WI-FI®ACCESS POINT WITH
MU-MIMO

1
WARRANTY AND REGULATORY INFORMATION
The Amped Wireless (A division of Newo Corporation, Inc.) Limited Warranty
Warranty Period: The Amped Wireless Limited Warranty is for one (1) year from the date of purchase for new
products. Refurbished products carry the Limited Warranty for thirty (30) days after the date of purchase.
Guarantee: Amped Wireless warrants to the original purchaser that the hardware of this Amped Wireless
product shall be free of defects in design, assembly, material, or workmanship.
Conditions: The Amped Wireless Limited Warranty is for repair or replacement only at the sole discretion of
Amped Wireless. Amped Wireless does not issue any refunds for purchased product. In the event that Amped
Wireless is unable to repair or replace a product (i.e. discontinued product), Amped Wireless will offer a credit
toward the purchase of a similar product of equal or lesser value direct from Amped Wireless. Any repaired or
replacement products will be warranted for the remainder of the original Warranty Period or thirty (30) days,
whichever is longer. Amped Wireless reserves the right to discontinue any of its products without notice, and
disclaims any limited warranty to repair or replace any such discontinued product. Amped Wireless reserves
the right to revise or make changes to this product, its documentation, packaging, specifications, hardware,
and software without notice. If any portion of the Amped Wireless Limited Warranty is found to be
unenforceable, its remaining provisions shall remain in effect. All costs of shipping the product to Amped
Wireless shall be borne solely by the purchaser.

2
Limitations: IN NO EVENT “HALL AMPED WIRELE““’ NEWO CORPORATION’“ LIABILITY EXCEED THE AMOUNT
PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR
ITS DOCUMENTATION. The Amped Wireless Limited Warranty does not apply if: (a) the product assembly has
been opened or damaged, (b) the product or its software or firmware has been altered or modified, (c) the
podut has ot ee used ad istalled i aodae to Aped Wieless’ istutios, d the podut has
been subjected to misuse, or negligence. Amped Wireless does not guarantee the continued availability of a
thid pat’s seie fo hih this podut’s use o opeatio a euie. The Aped Wieless Liited
Warranty does not protect against acts of God, vandalism, theft, normal wear and tear, obsolescence and
environmental damages such as, but not limited to, weather and electrical disturbances. The Amped Wireless
Limited Warranty is the sole warranty for this product. There are no other warranties, expressed or, except
required by law, implied, including the implied warranty or condition of quality, performance merchantability,
or fitness for any particular purpose.
How to Claim Warranty: In the event that you have a problem with this product, please go to
www.ampedwireless.com/support to find help on solving your problem. In the event that you cannot and
eed to file a aat lai, please all Aped Wieless’ Elite “uppot o isit
http://www.ampedwireless.com/support/center.html#rma to obtain a Support Ticket Number (obtained from
Technical Support Reps), fill out a Return Authorization (RMA) form and obtain a Return Authorization (RMA)
number. A dated proof of original purchase and the RMA number is required to process warranty claims. You
are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless. The

3
bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole
discretion of Amped Wireless and determined based on the details of each RMA case. Customers outside of
the United States of America are responsible for all shipping and handling costs including custom duties, taxes
and all other related charges.
Technical Support: The Amped Wireless Limited Warranty is not related to the terms, conditions and policies
of Amped Wireless Elite Support offerings. For questions regarding support, please contact
[e-mail]

4
Regulatory Information
FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC
Rules and Regulations. Operation of this device is subject to the following two (2) conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the distance between the equipment and the receiver.

5
-Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device
that ae ot epessl appoed  the aufatue a oid the use’s authoit to opeate the euipet.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter. Avoid use of this product near water or during an electrical storm as there may be a remote risk
of electrical shock from lighting. This product may contain lead, known to the State of California to cause
cancer, and birth defects or other reproductive harm. Wash hands after handling. This device must always be
used with a Listed Computer or device.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz
frequency range.
FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential
for harmful interference to co-channel Mobile Satellite systems.

6
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.

7
Industry Canada Statement: This Class B digital apparatus complies with RSS-247 and ICES-003 of the Industry
Canada Rules. This device complies with Industry Canada license-exempt RSS standard(s). Operation of this
device is subject to the following two (2) conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm
between the radiator and your body.
The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.

8
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as
appropriate.
This device has been designed to operate with an antenna having a maximum gain of 4.03 dBi and 4.58 dBi at
2.4 GHz and 5 GHz respectively. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device.
No.
Antenna Type
For 2.4GHz Gain (dBi)
For 5GHz Gain (dBi)
Antenna Connector
1
Dipole
4.03
Band 1 : 4.58
Band 4 : 4.58
RP-SMA
2
Dipole
4.03
Band 1 : 4.58
Band 4 : 4.58
RP-SMA
3
Dipole
4.03
Band 1 : 4.58
Band 4 : 4.58
RP-SMA
4
Dipole
4.03
Band 1 : 4.58
Band 4 : 4.58
RP-SMA

9
Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS-
247 et ICES-00 d’Idustie Caada. Le present appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. Le fonctionnement de cet appareil est sujet aux deux conditions
suivantes:
(1) Cet appareil ne peut pas causer de brouillage préjudiciable
(2) Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un
dysfonctionnement.
Déclaration d’eposition à la radiation : Cet uipeet espete les liites d’epositio au aoements
IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une
distance minimale de 21  ui spae l’let aoat de ote ops.
L’etteu e doit i te utilis ae ue aute atee ou u aute émetteur ni se trouver à leur proximité.
Pour les produits disponibles aux Etats-Unis / Canada du marche, seul le canal 1 a 11 peuvent etre exploites.
Selection d'autres canaux n'est pas possible.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a
l’iteieu afi de eduie les isues de ouillage pejudiiale au sstees de satellites oiles utilisat les
memes canaux.

10
Le gai aial d’atee peis pou les dispositifs utilisat la ade 725-5850 MHz) doit se conformer a
la liite de p.i..e. speifiee pou l’eploitatio poit a poit et o poit a poit, selo le as.
Cet appareil a été concu pour fonctionner avec une antenne ayant un gain maximum de 4,03 dBi et 4,58 dBi
sur les bandes .GHz et  GHz espetieet. L’utilisatio d’atee aat u gai supieu est stiteet
itedit pa le gleet d’Idustie Caada. L’ipdae d’atee euise est 0 ohs.
Le present emetteur radio a ete approuve par Industrie Canada pour fonctionner avec les types d'antenne
enumeres ci-dessous et ayant un gain admissible maximal et l'impedance requise pour chaque type d'antenne.
Les types d'antenne non inclus dans cette liste, ou dont le gain est superieur au gain maximal indique, sont
strictement interdits pour l'exploitation de l'emetteur.
No
Tpe d’antenne
Gain en 2.4 GHz (dBi)
Gain en 5 GHz (dBi)
Connecteur d’antenne
1
Dipole
4,03
Bande 1 : 4,58
Bande 4 : 4,58
RP-SMA
2
Dipole
4,03
Bande 1 : 4,58
Bande 4 : 4,58
RP-SMA
3
Dipole
4,03
Bande 1 : 4,58
Bande 4 : 4,58
RP-SMA
4
Dipole
4,03
Bande 1 : 4,58
Bande 4 : 4,58
RP-SMA

11
LEGAL NOTICES & DISCLAIMERS
Copyright Information and Trademark Usage Guidelines
© 2016 Amped Wireless / Newo Corporation. All rights reserved. Amped Wireless, Newo Corporation, and the
Amped Wireless logo are registered trademarks or trademarks of Newo Corporation. All non-Amped Wireless
trademarks, logos, brands and products are trademarks or registered trademarks of their respective owners.
Amped Wireless does not claim any relation. Mention of non-Amped Wireless products and brands are for
information purposes only and does not constitute an endorsement or affiliation.
Amped Wireless authorizes you to copy materials published by Amped Wireless solely for non-commercial use
within your organization in support of Amped Wireless products. No other use of this information is
authorized. Any copy of these materials which you make shall retain all copyright and other proprietary notices
in the same form and manner as on the original. Except as specified above, nothing contained herein shall be
construed as conferring by implication, estoppel or otherwise any license or right under any patent, trademark
or copyright of Amped Wireless or any third party.
All contents of this product, including Software, are protected by copyright, except as permitted herein. No
portion of the information may be reproduced without prior written permission from Amped Wireless. The

12
distribution, modification, publication and transmission of any content of this product for public or commercial
purposes is strictly prohibited.
The Amped Wireless logo requires permission for use. For use of the Amped Wireless logo, please email
[e-mail] of Amped Wireless' trademarks require the use of the proper trademark
symbol in all usage cases.
The guidelines for trademark usage apply to all Amped Wireless customers, employees, vendors, consultants,
licensees and any other third party.
Disclaimers
Amped Wireless makes all attempts in providing accurate information on all media. However, Amped Wireless
makes no warranty as to the accuracy of the information, including representations and warranties about the
accuracy of product specifications, marketing material, product availability, new product launch dates and all
other content herein. Amped Wireless reserves the right to update and change information without prior
notice. All information provided is provided "AS IS" with all faults without warranty of any kind. Either
expressed or implied. Amped Wireless and its suppliers disclaim all warranties, expressed or implied including,
without limitation. Amped Wireless and its suppliers shall not be liable for any indirect, special, consequential,
or incidental damages including, without limitation, lost profits or revenues, cost of replacement goods, loss or

13
damage to data arising out of the use or inability to use any Amped Wireless product, damages resulting from
use of or reliance on information present, even with prior notice to Amped Wireless.
All non-Amped Wireless trademarks, logos, brands and products are trademarks or registered trademarks of
their respective owners. Amped Wireless does not claim any relation. Mention of non-Amped Wireless
products and brands are for information purposes only and does not constitute an endorsement or affiliation.
Product wireless range specifications are based on performance test results. Actual performance may vary due
to differences in operating environments, building materials and wireless obstructions. Performance may
increase or decrease over the stated specification. Wireless coverage claims are used only as a reference and
are not guaranteed as each wireless network is uniquely different.
Maximum wireless signal rates are derived from IEEE 802.11 standard specifications. Actual data throughput
may vary as a result of network conditions and environmental factors.
Wi-Fi Range Extenders may not work with non-standard Wi-Fi routers or routers with altered firmware or
proprietary firmware, such as those from third party sources or some Internet service providers. May not work
with routers that do not comply with IEEE or Wi-Fi standards.

14
Software Licenses / Disclaimers
This product contains Software (including firmware), licensed to you, the purchaser, by Amped Wireless. This
also includes Software downloaded from an authorized website, such as www.ampedwireless.com or from an
authoized appliatio aket suh as Google Pla o Apple’s App “toe.
This liese allos ou to opeate the “oftae i the ae desied i the use’s aual fo the
purchased product. You can make as many copies of the Software as needed for your personal use. Modifying
of or tampering of the Software, including but not limited to any Open Source Software, is solely at your own
risk. Amped Wireless is not responsible for any such modification or tampering. Amped Wireless will not
support or warrant any product in which you have or have attempted to modify the Software provided by
Amped Wireless. You may not lease, sublicense, resell, redistribute or otherwise transfer the Software
without written consent from Amped Wireless.
The “oftae is poided to ou as is ith all faults ad ithout aaties of a kid. In particular, Amped
Wireless does not guarantee that the Software will be error-free or that the Software will be free from system
threats or attacks from viruses. Amped Wireless does not warrant that the Software will meet your
expectations or that the software will be suitable for your particular situation. Amped Wireless warrants that
any media (such as an included CD) on which the Software is provided to be free from defects. If you have an
eligible warranty claim for defective media, Amped Wireless will replace the Software media.

15
IT IS YOUR RESPONSIBILITY TO BACK UP YOUR SYSTEM INCLUDING, WITHOUT LIMITATION, ANY DATA THAT
YOU MAY USE OR POSSESS IN CONNECTION WITH THE PRODUCT. ANY MATERIAL, INFORMATION OR DATA
DOWNLOADED OR OTHERWISE OBTAINED IS ACCESSED AT YOUR OWN DISCRETION AND RISK, AND YOU WILL
BE RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR PRODUCT, OR LOSS OF DATA THAT
RESULTS FROM THE DOWNLOAD OF SUCH MATERIAL, INFORMATION OR DATA.
AMPED WIRELE““ I“ NOT RE“PON“IBLE FOR ANY DAMAGE TO THE PURCHA“ER’“ COMPUTER “Y“TEM OR
DATA.
All title and copyrights in and to the Software and any copies thereof are owned by Amped Wireless or its
partners/suppliers. All title and intellectual property rights in and to the content which may be accessed
through use of the Software is the property of the respective content owner and may be protected by
applicable copyright or other intellectual property laws and treaties. This license grants you no rights to use
such content. You may not delete any copyright, trademark or other proprietary notices from the Software or
documentation.

16
Dispute Resolution / Arbitration
This section describes how you agree to resolve any disputes with Amped Wireless regarding these Terms of
Use or your purchase of any product from Amped Wireless and your use of that product. You and Amped
Wireless agree to the following resolution process.
To begin with, you agree that any claim that you might have against us regarding these Terms of Use or your
purchase of any Amped Wireless product or use of that product must be resolved through binding arbitration
before the American Arbitration Association using its Commercial Arbitration Rules. The arbitrator shall have
exclusive authority to the extent permitted by law to resolve all disputes arising out of or relating to the
interpretation, applicability, enforceability, or formation of our agreement, including, but not limited to, any
claim that all or part of this agreement is void or voidable. The arbitrator shall also have exclusive authority to
the extent permitted by law to decide the arbitrability of any claim or dispute between you and Amped
Wireless.
Because we prefer to resolve our issues with you directly, you agree to arbitrate with Amped Wireless only in
your individual capacity, not as a representative or member of a class. As such, your claims may not be joined
with any other claims and there shall be no authority for any dispute to be arbitrated on a class-action basis or
brought by a purported class representative.

17
It is important that you understand that the aitato’s deisio ill e idig ad a e eteed as a
judgment in any court of competent jurisdiction. If the arbitrator rules against Amped Wireless, in addition to
accepting whatever responsibility is ordered by the arbitrator, we will reimburse your reasonable attorneys'
fees and costs.
It's important to us that we address any issues you might have promptly. To help us do that, you agree to
begin any arbitration within one year after your claim arose; otherwise, your claim is waived.
Unless you and Amped Wireless agree otherwise, any arbitration hearings will take place in the county where
you reside. If your claim is for $10,000 or less, you may choose whether the arbitration will be conducted
solely on the basis of documents submitted to the arbitrator, through a telephonic hearing, or by an in-person
hearing as established by the AAA Rules. If your claim exceeds $10,000, the right to a hearing will be
determined by the AAA Rules.
If your claim against Amped Wireless is for less than $10,000, Amped Wireless will pay all arbitration fees. If
your claim against Amped Wireless is for $10,000 or more, you are responsible for paying your own portion of
the fees set foth i the AAA’s fee shedule fo osue disputes, ad Aped Wieless ill pay all remaining
aitatio fees. If ou eliee ou aot affod the AAA’s fee, ou a appl to the AAA fo a aie.