Amperes RP1104 User manual

INSTRUCTION MANUAL
RP1104
Matrix Remote Zone Controller
VER 3 / 2022
Thank you for choosing Amperes Matrix paging system.
RP1104 is a remote zone control panel which is to be located
away from matrix controller for easy control of music source,
tone and volume at particular zone.
Amperes Matrix System is most suitable for installations in
clubhouse, hotels, restaurants, etc., where each zone shall
have flexibility of selecting required music and volume.
Amperes RP1104 is a touch screen panel, made for the above
purpose with screen lock feature to avoid unnecessary chang-
es to the setting.
Power source 24V DC via MxP2288
Power consumption 100 mA
LCD panel 3.5” resistive touch screen
Communication RS485 ; 19.2 Kbps
Controls Volume / BGM source / tone controls / channel select
Cabling Cat 5e / 6
Distance Up to 500m
Dimensions (WxH) 86 x 86 mm
Color White
Weight 100 g
Technical Specifications

General Schematic
PAGE 2
Guide to Installation
RP1104 MATRIX REMOTE ZONE CONTROL
1 : Cut the wall hole or using Back Enclosure
2 : Cable Connection - Connect the cable to the jack located at the rear of the controller
WALL
72 mm
72 mm
RP1104 can be installed directly to the
partitioned wall, with the hole size as
shown.
3 : Install RP1104 to Back Enclosure
Back enclosure - surface or wall concealed
WALL
AB (RS485)
24V DC
Back Enclosure
REMOTE
PAGING MIC
M P 2288
12 x 8 ETHERNET MATRIX CONTROLLER
x
EP1200
CONNECTION
24V DC IN ; 1 A
+ -
REMOTE
PANEL 1
REMOTE
PANEL 2
CH4CH1 CH2 CH3
COM
NO
COM
NO
COM
NO
COM
NO
CONFIGURABLE REMOTE TRIGGER
EM / AC
CONT (NO)
RS485
A B
ETHERNET
PORT
MESSAGE PLAYER
IN ( LINE BAL )
+V -V A+ B-
24V DC RS485
RP1104
Remote Zone Control Panel
Made In Malaysia
2 pair screen cable
24V DC
AB (RS485)
If it is to be installed at brick
wall, use the specially designed
back enclosure. Surface or
concealed versions are
available.
Ensure current capacity is sufficient to drive
multiple units of RP1104
REMOTE
PAGING MIC
M P 2288
12 x 8 ETHERNET MATRIX CONTROLLER
x
BALANCED CHANNEL OUTPUTS
BALANCED INPUTS ( XLR - MIC LEVEL / PHONE JACK - LINE LEVEL )
CH 6CH 5CH 4CH 3CH 2CH 1 CH 8CH 7
CH 8CH 7
CH 6CH 5CH 4
CH 3CH 2
CH 1
CASCADE OUT
EP1200
CONNECTION
24V DC IN ; 1 A
+ -
REMOTE
PANEL 1
REMOTE
PANEL 2
CH4CH1 CH2 CH3
COM
NO
COM
NO
COM
NO
COM
NO
CONFIGURABLE REMOTE TRIGGER
EM / AC
CONT (NO)
RS485
A B
MATRIX CASCADING TERMINALS
( MAX STACKS : 12 UNITS )
CASCADE IN
ETHERNET
PORT
MESSAGE PLAYER
IN ( LINE BAL )
Speakers
RP1104
RP1104
RP1104
MxP2288
Speakers
Speakers
Power Amplifier
Power Amplifier
Power Amplifier
24V
AB
Out 1
Out 8
Max number of RP1104 is 8. Ensure power supply is sufficient using
external PSU if required for more RP1104 to be installed.

Operating the Unit
PAGE 3
RP1104 MATRIX REMOTE ZONE CONTROL
Upon powering up the unit, a welcome screen with logo
shall appear. Touch the screen and the next page shall
appear which enables the user to select the audio
source and the output volume. The connected zone of
the panel is indicated at the box at the right side.
Some settings that can be made are :
- Zone output of the panel
- Brightness
- Bass and Treble controls
- Screen lock with password
amperes
MATRIX REMOTE PANEL
1
IN
30
VOL%
OUT
6
Audio source
selection at Matrix
Output volume
Setting
Current
output
channel
To change a setting, press the
Setting button and a Setting
screen shall appear as shown :
SETTING
IN
2
OUT
BACK
5
ADD
Screen brightness (1)
Bass and Treble (2)
Screen lock (3)
Select the correponding
Matrix controller
Select the output channel of
the controller
The output channel of matrix
controller’s link to this remote
panel can be set directly from
this page
SETTING PAGE / RP1104 LINK
Select the button (1) for screen brightness and adjust
the level at this page
SET SCREEN BRIGHTNESS
Bass and Treble setting for the output channel are adjust-
able at this page by selecting button (2)
TONE SET FOR THE CHANNEL
SETTING
BRI%
6
OUT
BACK
7
ADD
10
Use the Up and
Down keys to adjust
the brightness
TONE CONTROL
BASS
6
VOL%
BACK
0dB
TRE
+2dB
Use the Up and Down
keys to adjust the Bass,
Treble and Volume
The screen lock feature can be set with simple passwords to avoid unnecessary medding of the audio output. Default password
is 1234. To enable this feature with new password, press screen lock button ( 3 ).
SET SCREEN LOCK
LOCK SCREEN
BACK
Enter New Password To Activate
****
7 8 9 0 Enter
456.Esc
1 2 3+/- Del
XLOCK SCREEN
BACK
Password Set
Press this to go to
next screen
Enter a new 4 digit
password
Screen lock is activated. To
deactivate screen lock,
repeat the steps.
SELECT AUDIO SOURCE / ADJUST VOLUME

AMPERES ELECTRONICS SDN BHD
MADE IN MALAYSIA
Updated : Mar 22
ISO 9001: 2015
Design & Manufacture of Public Address Equipment and Systems
Warranty Conditions
Disclaimer
Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes
Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn
Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor,
Malaysia or its authorized dealers. This warranty is not valid if repairs are performed by unauthorized
personnel or service centres.
This warranty covers only repairs and replacement of defective parts ; cost and risks of transportation as
well as removal and installation of the product from the main system are for the account of the purchaser.
This warranty shall not extend to the replacement of the unit.
This warranty does not cover damages caused by misuse, neglect, accident of the product as well as using
the product with power supply voltage other than shown on the product, or any other power supply source /
adaptor not recommended by the manufacturer.
This warranty does not cover damages caused by fire, earthquakes, floods, lightning and every cause not
directly related to the unit.
This warranty does not include any indemnity in favor of the purchaser or the dealer for the period out of use
of the unit; moreover the warranty does not cover any damages which may be caused to people and things
when using the product.
This warranty certificate is valid only for the described product, and is not valid if modifications are made on
this certificate or on the identification label applied on the product.
This warranty covers all the material and manufacturing defects and is valid for a period of 36 months from
the date of purchase or for a specified period in countries where this is stated by a national law. In this case,
the extension is valid only in the country where the product is purchased.
Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products under warranty if
the design changes or improvements are made.
Information contained in this manual is subject to change without prior notice and does not represent a
commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD shall not be liable for any loss
or damages whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all services and repairs on this product be carried out by AMPERES ELECTRONICS
SDN BHD or its authorized service agents.
AMPERES series must only be used for the purpose they were intended by the manufacturer and in
conjunction with this operating manual.
AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or damages
caused by service, maintenance or repair by unauthorized personnel, or by use other than that intended by
the manufacturer.