Amperes VP7810 User manual

VP7810
Introduction
Instruction Manual
Precision Design,Absolute Confidence
8 Ohm Speaker Patch
www.ampereselectronics.com
VP7810 is normally used in hotel room, which is used to override the speaker audio inside
bathroom / foyer (BGM ted from TV or other audio player), to central paging audio.
It operates only doing emergency cases, which the central PA is required to send audio to the
speaker with 8 Ohm impedance. ie. VP7810’s function in to match the impedance of the said
speaker.
Technical Specification:
Amperes Electronics reserves the rights to change the above specifications without prior notice. All rights reserved.
VP7810
10W 8 Ohm
Hardwired
Power rating
Overriding voltage
Patch connection
Cablings
Size (front panel)
Weight (excl. enclosure)
Concealed (W x H x D)
Surface (W x H x D)
24V DC
4 wire system
86 x 86 x 40 mm
70 x 120 mm face plate available upon request
215 gms
77 x 77 x 60 mm
85 x 85 x 60 mm
Suitable for 4 wire system : 2 x audio, 2 x 24V DC overriding
Built in overriding relay for emergency bypass with LED indicator
Also available with 70 x 120 mm front panel
Features:
Application Schematic:
PA - TV BGM
OVERRIDE
EM OVERRIDE MODULE
OVERRIDE
2
SPEAKER VOLUME
OFF
1
5
4
3
8 OHM OUT
MINI AMP VC7805 / 7810
VP7810
100V output
From central PA system
4 / 8 OHM
SPEAKER
24V DC Override
Line audio from TV
VP7810 application schematic
Back enclosure ( optional items )

VP7810: 8 Ohm Speaker Patch
www.ampereselectronics.com
ISO 9001: 2015
Design & Manufacture of Public Address Equipment and Systems
Certicate No. 16895 / A / 0001 / UK / En
Instruction Manual
Warranty Conditions
Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of
Amperes Electronics Service Centres may be asked for by the purchaser or send directly to
Amperes Electronics Sdn Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar
Puchong, 47100, Puchong, Selangor, Malaysia or its authorized dealers. This warranty is
not valid if repairs are performed by unauthorized personnel or service centres.
This warranty covers only repairs and replacement of defective parts ; cost and risks of
transportation as well as removal and installation of the product from the main system are
for the account of the purchaser. This warranty shall not extend to the replacement of the
unit.
This warranty does not cover damages caused by misuse, neglect, accident of the product
as well as using the product with power supply voltage other than shown on the product, or
any other power supply source / adaptor not recommended by the manufacturer.
This warranty does not cover damages caused by fire, earthquakes, floods, lightning and
every cause not directly related to the unit.
This warranty does not include any indemnity in favor of the purchaser or the dealer for the
period out of use of the unit; moreover the warranty does not cover any damages which may
be caused to people and things when using the product.
This warranty certificate is valid only for the described product, and is not valid if
modifications are made on this certificate or on the identification label applied on the
product.
This warranty covers all the material and manufacturing defects and is valid for a period of
36 months from the date of purchase or for a specified period in countries where this is
stated by a national law. In this case, the extension is valid only in the country where the
product is purchased.
Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products
under warranty if the design changes or improvements are made.
Disclaimer
Information contained in this manual is subject to change without prior notice and does not
represent a commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD
shall not be liable for any loss or damages whatsoever arising from the use of information or
any error contained in this manual.
It is recommended that all services and repairs on this product be carried out by AMPERES
ELECTRONICS SDN BHD or its authorized service agents.
AMPERES series must only be used for the purpose they were intended by the
manufacturer and in conjunction with this operating manual.
AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or
damages caused by service, maintenance or repair by unauthorized personnel, or by use
other than that intended by the manufacturer.
2 : Install VP7810 to Back Enclosure
Locking Slots
Locking Slots
Installation Guide:
Speaker
24V overriding cable to loop to next unit if required.
Please cut these cable and insulate them if not used.
24V DC Overriding
From Central PA
100V Line
From Central
PA System
White
Blue
Black
Red
1 : Cable Connection
Terminate the incoming cables for Amplifier 100V, TV speaker out and DC
overriding signal to the terminal. Output cable to 8 Ohm speaker are Blue and
White.
-
+
-
+
-
+
+
+
--
TV speaker output /Mini Amp through
VC7810 / VC7805 vol. control
Mount the VP module to back enclosure (surface / conceal), thereafter clip
the frame to the back as shown.
Back Enclosure
VP Module
Frame
Ver 1 / 17