Amplicom Cl100 User manual

User Guide

CL100

Contents

Analog Alarm Clock Features........3

Cordless Vibration Pad Features ..4

Important Safety Instructions ......5

Included Equipment.......................6

Set Up..............................................6

LED Display Notication................8

Clock Functions ..............................9

Help and Support ......................... 12

Troubleshooting Guide ................ 12

Maintenance and Warranty......... 13

Technical Details...........................15

Instructions available in other languages at www.amplicomusa.com.

The FCC requires that you will be advised of certain requirements involving the use of this telephone.

1. This equipment complies with Part 68 of the FCC rules. A label on the base unit of this equipment contains, among other information, the ACTA Registration Number

(US:AAAEQ##TXXXX) and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.

2. An applicable certication jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e., RJ11C) in the packaging with each piece of approved

terminal equipment.

3. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements

adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is

also compliant. See installation instructions for details.

4. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your number is called.

In most, but not all areas, the sum of the REN of all devices should not exceed ve (5.0). To be certain of the number of devices you may connect to your line, as

determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area.

NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualied installer.

5. If your telephone causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in

advance. But if advance notice is not practical, you will be notied as soon as possible. You will be advised of your right to le a complaint with the FCC.

6. Your telephone company may make changes to its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If they

do, you will be given advance notice so as to give you an opportunity to maintain uninterrupted service.

7. If you experience trouble with the telephone, please contact the Amplicom Service Center at 1-866-AMPLICOM (267-5426) for repair/warranty information. The

telephone company may ask you to disconnect this equipment from the network until the problem have been corrected or you are sure that the equipment is not

malfunctioning.

8. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public

utility commission or corporation commission for information.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using

this phone. Changes or modications not expressly approved in writing by Amplicom may void the user’s authority to operate this equipment.

Some cordless phones operate at frequencies that may cause interference to nearby TVs and VCRs; to minimize or prevent such interference, the base of the cordless

phone should not be placed near or on top of a TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will

often reduce or eliminate the interference.

FCC Compliance

Clock Features

1Snooze button/

Alarm light/

incoming call

light/Stop alarm

2LED: Power ON/

OFF/Battery

ON/OFF

3Alarm ON/OFF

CL100 Analog Alarm Clock Features

4Volume control

5Set one of 5

acoustic signals

6Pitch

7Vibration and

Acoustics

8Flashing lamp

ON/OFF

9Snooze delay

10 Clock

illumination

11 Telephone line

socket

12 Power adapter

socket

13 Vibration pad

socket

14 Set alarm time

15 Set time

16 Battery

compartment

(on underside)

Service Center

Clock Features

CL100 Cordless Vibration Pad Features

1LED: Alarm ON/

OFF/Battery

charge low

2Vibration pad

ON/OFF

3Battery

compartment

4Screws

for battery

compartment

5Connection

cable socket

1-866-AMPLICOM (267-5426) 5

Important Safety Instructions

Read this operating manual thoroughly.

SAVE THESE INSTRUCTIONS

Intended use

This alarm clock is designed to provide an acoustic alarm or alert signal at a set

time or on receipt of a telephone call. Any other use is considered unintended

use. Unauthorized modication or reconstruction is not permitted. Do not open

the device and attempt any repair work yourself.

Installation location

Prevent excessive exposure to smoke, dust, vibration, chemicals, moisture, heat

and direct sunlight.

Heart pacemaker

Always maintain a distance of at least 6 inches to implanted heart pacemakers

to prevent any possible interference.

Safety

Service Center

Getting Started — Included Equipment

Set up

1. Connecting the alarm clock

i. Insert the supplied batteries in the clock’s battery compartment.

Getting started

Important: Pay attention to correct polarity when inserting the batteries.

• 1 Analog Alarm Clock

• 1 Power Adapter

• 1 Vibration Pad

• 1 Connector Cable for Vibration Pad

• 2XAAA, 500mA Ni-MH Rechargable

Battery for Alarm Clock

• 3XAAA, 800mA Ni-MH

Rechargeable Battery Pack for

Vibration Pad

• Telephone Cord

• Operating Instructions

• Battery Compartment Cover

1-866-AMPLICOM (267-5426) 7

Getting started

ii. Replace the battery compartment cover on the underside of the alarm clock.

iii. Screw the battery compartment cover to the alarm clock housing.

2. Connect vibration pad and phone cord

Connect the equipment as illustrated below:

Power Supply Telephone Line

Vibration Pad

Important: To connect the alarm clock to a telephone connection for use as a signal

amplier, you may need an appropriate adapter.

Important: Only use the rechargeable battery pack model GPHCH73N07, NPI

dened 800mAh NiMH supplied by GPI INTERNATIONAL LIMITED and the

telephone cord provided.

Your CL100 is now ready for use!

Service Center

LED Display Notication

Alarm Clock Face

The following functions are on the alarm clock face:

Red: Alarm function is activated.

Flashing Orange: Alarm function is activated, and battery charge is low.

Vibration Pad

The following functions are on the vibration pad:

Flashing Green Every 2 Seconds: Vibration pad is on.

Red: Vibration pad is charging.

Flashing Red: Battery charge is low.

Getting startedGetting started

Getting started

1-866-AMPLICOM (267-5426) 9

Clock Functions

Setting the clock

Turn the set time rotary knob until the clock shows the correct

time.

Setting the alarm

Turn the alarm time rotary knob until the clock shows the correct

time for the alarm to trigger.

Turning the alarm on/off

Turn the alarm on/off rotary knob clockwise for On.

Counterclockwise for Off.

Setting the volume

Caution: The volume/acoustic signal/pitch can only be modied if the alarm

is on. If the alarm is off, those settings cannot be adjusted.

Caution: The alarm and telephone ringer begin sounding at a low volume.

The volume will then increase to the set maximum until the alarm is turned

off or the telephone is answered.

Turn the volume rotary knob to set the maximum volume for the

alarm and telephone ringer. Set the volume to a quiet setting to

start and increase it slowly to the desired maximum volume.

Clock functions

Service Center

Clock functions

Caution: Exposure to the alarm at full volume for a long period could cause

ear damage.

Selecting the acoustic signal

Turn the acoustic signal rotary knob to required acoustic signal.

Setting the pitch

Turn the pitch rotary knob to set the pitch. It may be possible to

detect higher or lower pitch tones even at low volumes.

Setting the clock face illumination

Slide the illumination switch to set clock face illumination. The

following settings are available: (From left to right) bright,

medium or off.

Selecting the alarm mode

MODE

Slide the alarm mode switch to set the type of alarm. There are

three settings available: (from left to right) vibration only, acoustic

signal only or acoustic signal and vibration.

1-866-AMPLICOM (267-5426) 11

Setting the ashing light

ON OFF

Slide the switch to set the light in the snooze button to ash

during an alarm. There are two settings available: (from left to

right) On and Off.

Setting the snooze delay

SNOOZE

0m 5m 15m

Slide the snooze delay switch to set the snooze delay. There are

three settings available: (from left to right) 0 min, 5 min, or 15 min.

Activating the snooze delay

Important: if the Snooze button is pressed when the light is switched off,

the clock face will illuminate for 30 seconds to allow the user to see the

time. After 30 seconds the illumination will go out.

SNOOZE

Press the snooze button to stop the alarm for a specied time

before it resumes. To activate the snooze function, see “Setting

the snooze delay”.

Activating the vibration pad

After connecting the vibration pad, use the switch on the vibration

pad to turn the vibration function on and off. There are two

settings available: (from left to right) On and Off.

Clock functions

Service Center

Help and support

If you have problems with your device, please refer to the following information

before calling for support. If you continue to have problems, please call the

Service Center at 1-866-AMPLICOM (267-5426) for further assistance.

Troubleshooting guide

My clock does not work

1. The battery charge may be too low or no batteries have been inserted.

2. The clock may not be plugged in.

My vibration pad does not work

1. The battery charge may be too low or the battery is defective (additional

Battery packs are available from Amplicom).

2. The vibration pad may not be switched on.

3. The vibration pad is too far away from the alarm clock.

The alarm does not go off

The alarm function is not switched on; turn the knob to “On”.

Help and support

1-866-AMPLICOM (267-5426) 13

Maintenance and Warranty

Maintenance

• Please clean your equipment’s surfaces with a soft, lint-free cloth.

• Never use cleaning agents or solvents.

Warranty

AMPLICOM equipment is produced and tested according to the latest

production methods. The implementation of carefully chosen materials and

highly developed technologies ensure trouble free functioning and a long

service life. The terms of the warranty do not apply where the cause of the

equipment malfunction is the fault of the telephone network operator or any

interposed private branch extension system. The terms of the warranty do not

apply to the rechargeable battery pack or power packs used in the products.

The period of warranty is 24 months from the date of purchase.

All deciencies resulting from material of production faults which occur during

the period of warranty will be eliminated free of charge. Rights to claims under

the terms of warranty are annulled following intervention by the purchaser or

third parties. Damage caused as a result of improper handling or operation,

incorrect positioning or storing, improper connection or installation, Acts of

God or other external inuence are not covered by the terms of warranty.

In the case of complaints, we reserve the right to repair or replace defect

parts or provide a replacement device. Replacement parts or devices become

our property.

Rights to compensation in the case of damage are excluded where there is no

evidence of intent or gross negligence by the manufacturer.

Maintenance and warranty

Service Center

Maintenance and warranty

If your equipment shows signs of defect during the period of warranty, please

return to the sales outlet in which you purchased the AMPLICOM equipment

together with the purchase receipt. All rights to claims under the terms of

warranty in accordance with this agreement must be asserted exclusively with

regard to your sales outlet.

Two years after the purchase of our products, claims under the terms of

warranty can no longer be asserted.

Declaration of conformity

The ETL Listed Mark is an alternative to the CSA and UL marks. ETL

Testing Laboratories owned by Intertek Testing Services (ITS) is

recognized by OSHA as a Nationally Recognized Testing Laboratory

(NRTL). ITS tests products according to nearly 200 safety and

performance standards. The ETL Listed Mark is accepted throughout the United

States when denoting compliance with nationally recognized standards such as

ANSI, IEC, UL, and CSA.

This certication mark indicates that the product has been tested to and has

met the minimum requirements of a widely recognized (consensus) U.S.

product safety standard, that the manufacturing site has been audited, and that

the applicant has agreed to a program of periodic factory follow-up inspections

to verify continued conformance.

1-866-AMPLICOM (267-5426) 15

Technical details

Alarm Clock

Frequency 422 MHz

Power supply Input: 210-240 VAC, 50/60Hz

Output: 12VDC, 670mA

Telephone plug BS 6312

Batteries 2 x AAA 1.2 V, 500 mAh, NiMH

Initial charging time Up to 16 hrs

Optimum ambient temperature 32˚F to 104˚F (0˚C to 40˚C)

Optimum storage temperature -4˚F to 140˚F (-20˚C to 60˚C)

Transmission power 10 dBm

Dimensions L / W / H 5.2 x 5.8 x 3.3 in (132 x 146 x 84.6 mm)

Weight 12.3 - 13.4 oz (350 - 380 g)

Vibration pad

Range Approx. 328 ft (clear space)

Batteries 3 x AAA 3.6 V, 800 mAh, NiMH

Initial charging time Up to 16 hrs

Optimum ambient temperature 32˚F to 104˚F (0˚C to 40˚C)

Optimum storage temperature -4˚F to 140˚F (-20˚C to 60˚C)

Dimensions W / H 4.5 x 1.4 in (113.3 x 36.6 mm)

Weight 6.3 - 7 oz (180 - 200 g)

Technical details

THIS PAGE LEFT INTENTIONALLY BLANK

Guía del

usuario

CL100

Índice

Funciones del reloj despertador

analógico ..........................................3

Funciones de la base vibratoria

inalámbrica .......................................4

Instrucciones importantes de

seguridad..........................................5

Equipo incluido...............................6

Instalación.......................................6

Noticación por LED ......................8

Funciones del reloj .........................9

Ayuda y asistencia técnica.......... 12

Guía para la solución de problemas....12

Mantenimiento y garantía........... 13

Mantenimiento y garantía........... 15

Instrucciones disponibles en otros idiomas en www.amplicomusa.com.

La FCC (Comisión Federal de Comunicaciones) exige que usted conozca ciertos requisitos con relación al uso de este teléfono.

1. Este equipo cumple con la Parte 68 de las normas de la FCC. En la parte inferior de este equipo se encuentra una etiqueta que contiene información que detalla, entre

otras cosas, el número de registro del ACTA (Comité Administrativo para Accesorios Terminales) (US:AAAEQ##TXXXX) y el REN (número de equivalencia de timbre)

correspondientes a este equipo. Si se le solicita, deberá proporcionar esta información a su compañía de teléfono.

2. En el embalaje, con cada artículo del equipo terminal aprobado se incluyen clavijas de conexión certicadas aplicables en conformidad con los Códigos Universales

de Órdenes de Servicio (USOC), por ejemplo RJ11C.

3. El enchufe y las clavijas de conexión utilizados para conectar este equipo al cableado de las instalaciones y a la red telefónica deben cumplir con las normas y los requisitos

aplicables de la Parte 68 de la FCC adoptados por el ACTA. Con este producto se provee un cable de teléfono y un enchufe modular que cumplen con las normas. Está

diseñado para poder conectarse a un conector modular compatible que también esté autorizado. Para más información, consulte las instrucciones de instalación.

4. El REN ayuda a determinar la cantidad de dispositivos que puede conectar a su línea telefónica sin que dichos dispositivos dejen de sonar al recibir llamadas. En la

mayoría de las áreas, pero no en todas, la suma del REN de todos los dispositivos no debe ser mayor que cinco (5,0). Para cerciorarse de la cantidad de dispositivos que

puede conectar a la línea, según el total de los números REN, comuníquese con su compañía de teléfono local para determinar el máximo de REN para su área de llamada.

AVISO: Si su hogar cuenta con un equipo de alarma con cableado especial conectado a la línea telefónica, asegúrese de que la instalación de este equipo no desactive el

equipo de alarma. Si tiene dudas sobre los factores que desactivan el equipo de alarma, consulte a la compañía de teléfono o a personal de instalación calicado.

5. Si su teléfono ocasiona daños a la red de telefonía, la compañía de teléfono podría interrumpir el servicio temporalmente. Si es posible, le noticarán con anticipación. Sin

embargo, si la noticación anticipada no es viable, le noticarán tan pronto como sea posible. Asimismo, le informarán sobre su derecho a presentar una queja ante la FCC.

6. La compañía de teléfono puede efectuar cambios en las instalaciones, los equipos, la manera de operar o los procedimientos que podrían afectar el funcionamiento

adecuado de su equipo. En ese caso, recibirá un aviso previo para permitirle hacer los cambios necesarios para tener servicio sin interrupción.

7. Si tiene problemas con el teléfono, comuníquese con el Centro de Atención al Cliente de Amplicom al número 1-866-AMPLICOM (267-5426) para obtener información

sobre la garantía o reparaciones. La compañía de teléfono puede pedirle que desconecte el equipo de la red hasta que el problema se haya solucionado o hasta que

esté seguro de que el equipo funciona correctamente.

8. Este equipo no puede ser usado con el servicio de monedas provisto por la compañía de teléfono. La conexión a una línea compartida está sujeta a las tarifas del

estado. (Para obtener más información, comuníquese con la comisión de servicios públicos estatal o la comisión de corporaciones).

Este dispositivo cumple con la Parte 15 de las normas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no debe causar

interferencias perjudiciales, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluidas aquellas que puedan provocar un mal funcionamiento. Al

usar este teléfono, no se puede garantizar la privacidad de las comunicaciones. Los cambios o las modicaciones realizadas a este equipo que no estén expresamente

aprobados por escrito por Amplicom pueden invalidar el derecho del usuario a utilizar el equipo.

Algunos teléfonos inalámbricos funcionan en frecuencias que pueden causar interferencia con televisores o videocaseteras que se encuentren cerca. Para minimizar

o evitar dicha interferencia, la base del teléfono inalámbrico no debe colocarse cerca o encima del televisor o la videocasetera. Si se produce interferencia, alejar el