Amprobe PM-60 User manual

Users Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’Uso
• Manual de uso
PM-60
Pocket Meter

PM-60
Pocket Meter
Users Manual
©2009 Amprobe Test Tools.
All rights reserved. Printed in China
English

Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material
and workmanship for 1 year from the date of purchase. This
warranty does not cover fuses, disposable batteries or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on Amprobe’s behalf.
To obtain service during the warranty period, return the product
with proof of purchase to an authorized Amprobe Test Tools
Service Center or to an Amprobe dealer or distributor. See Repair
Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.
ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR
STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY
DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of an
implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or
for calibration should be accompanied by the following: your
name, company’s name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the
problem or the service requested and include the test leads with
the meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with
expiration date, or a purchase order made payable to Amprobe®
Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before
requesting repair. During the warranty period any defective test
tool can be returned to your Amprobe® Test Tools distributor
for an exchange for the same or like product. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you. Additionally, in the United States and
Canada In-Warranty repair and replacement units can also be
sent to a Amprobe® Test Tools Service Center (see next page for
address).

Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be
sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test
Tools or inquire at your point of purchase for current repair and
replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: [phone] Tel: [phone]
Fax: [phone] Fax: [phone]
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe®
Test Tools distributor for a nominal charge. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you.
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
tel: [phone] - 0
*(Correspondence only – no repair or replacement available from
this address. European customers please contact your distributor.)

1). LCD Display
2). Hold function key
3). Function selection key
4). Range key
5). Function Selector
6). Test Leads
6
1
2
3
4
5
PM-60 Pocket Meter

1
CONTENTS
SYMBOLS.......................................................................... 2
UNPACKING AND INSPECTION ........................................ 3
INTRODUCTION ................................................................ 3
OPERATION....................................................................... 4
SPECIFICATION ................................................................. 8
MAINTENACE.................................................................... 13
TROUBLE SHOOTING........................................................ 13
Battery Replacement ................................................... 14

2
SYMBOLS
Warning! Dangerous Voltage (Risk of electric
shock).
Caution ! Refer to the user’s manual before
using this Meter.
Double Insulation or Reinforced insulation
Alternating Current (AC).
Direct Current (DC).
Low battery indicator
Ground (maximum permitted voltage
between terminal and ground).

Please remove all the test leads before
preforming maintenance, cleaning, battery
replacement, fuse replacement, etc
Complies with European Directives
Conforms to relevant Australian standards
Do not dispose of this pruduct as unsorted
municipal waste.
Contact a qualified recycler for disposal
 Warning!
To ensure safe operation and service of the Meter, follow
these instructions.
Failure to observe warnings can result in severe injury or
death.
• Do not operate this meter in explosive gas
(material), combustible gas (material) steam or
filled with dust.
• When using test leads or probes, keep your ngers
behind the finger guards.

3
• Use the Meter only as specied in this manual or
the protection by the Meter might be impaired.
• Always use proper terminals, switch position and
range for measurements.
• Do not apply more than the rated voltage, as
marked on Meter, between terminals or between
any terminal and earth ground.
• To avoid false readings that can lead to electric
shock and injury, replace battery as soon as low
battery indicator appears.
• Disconnect circuit power and discharge all high-
voltage capacitors before testing resistance,
continuity, diodes, or capacitance.
• To reduce the risk of re or electric shock; do not
expose this product to rain or moisture.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 PM-60 Meter
2 Battery (GPA76P, 1.5V)
1 User’s Manual
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
INTRODUCTION
This meter PM-60 can be measured voltage, resistance,
frequency, capacitance, diode, current (uA) and
continuity; It is an electronic measuring instrument that
combines several measurement functions in one unit.
PM-60 multimeter is portable hand-held devices useful
for basic fault finding and field service work. It can be
used to troubleshoot electrical problems.

4
OPERATION
Auto Power Off
Display Hold
The internal sounder will operate continuously with LCD
display flashing in two situations in the Data Hold mode:
1. The Meter measure a signal different from the
LCD reading.
2. The measured signal is the same unit as the LCD
reading and is larger 50 counts than the LCD
reading.