AMX NXR-ZGW-PRO Parts list manual

Operation/Reference Guide
Control System Accessories
NXR-ZGW-PRO
NetLinx ZigBee Pro Gateway
NXR-ZRP-PRO
NetLinx ZigBee Pro Repeater
Last updated: 2/14/2012

Overview
1
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Overview
The NXR-ZGW-PRO NetLinx ZigBee Pro Gateway (FG5791-11) is an Ethernet to ZigBee wireless gateway,
designed as the center of a ZigBee Pro network. The NXR-ZGW-PRO features a 10/100BaseT, auto-
negotiating Ethernet port capable of Power over Ethernet (PoE), 16 Mbytes of Flash, 16 Mbytes of SDRAM,
and a ZigBee Pro transceiver, and is controlled via a web server interface.
The NXR-ZRP-PRO NetLinx ZigBee Pro Repeater (FG5791-03) is a ZigBee wireless repeater that features
one megabit of external memory and a ZigBee Pro transceiver. Both use the 2007 ZigBee Pro standards.
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway
The NetLinx ZigBee Pro Gateway and Repeater are already enabled for ZigBee Pro
wireless communication. Neither device can be used with a standard ZigBee 2004 or
2006 wireless network; either the other devices in the network will need to be
updated to ZigBee Pro or the NXR-ZGW NetLinx Gateway (FG5791-01) and

NXR-ZRP Repeater (FG5971-02) should be used instead.
FIG. 1 NXR-ZGW-PRO, front and rear
NXR-ZGW-PRO Specifications
Dimensions (HWD): • 4.50" x 2.50" x 0.94" (114.30 mm x 63.50 mm x 23.81 mm)
• Depth does not include antenna
Weight: • 0.35 lbs (158.76 g) without antenna
• 0.40 lbs (181.44 g) with antenna
Power: 10.5 - 18 VDC; 13.5 (nominal operation voltage), or PoE Class 2
Memory: • 16 Mbytes of Flash memory
• 16 Mbytes of SDRAM
• 128K of microcontroller Flash memory
LEDs
Antenna
ID Button 10/100BaseT modular 2-pin 3.5mm
PWR connector
(RJ-45) Connector
Front Rear
Antenna
Antenna Mount

Overview
2NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
NXR-ZGW-PRO Specifications (Cont.)
Radio Specifications: • Frequency: IEEE 802.15.4
• Operating channels: 1 - 26
• Modulation technique: DSS
• Output power: Region/country specific
• Coverage area (N America): 165 feet (50.2m)
IP Configuration: Static IP or DHCP client
•DHCP default: DHCP/ZeroConf
•Static IP default: 169.254.1.2
Communications: The NXR-ZGW-PRO communicates with a NetLinx master over TCP/IP 
encapsulating the ICSP protocol via a physical Ethernet connection.
The ICSP device number can be set via the browser-based configuration
pages (page 17).
Front Compone nt s:
LEDs • PWR/STATUS - A green LED that blinks every 5 seconds to indicate the
device is installed and communicating properly with the Master. Power ON,
but no Master connection, is indicated with a solid light; Power OFF is
indicated with no light.
•LAN - A green LED indicates an Ethernet connection is established. The LED
blinks to indicate both sending and receiving information via Ethernet.
•RF - The LED is solid when devices are connected; devices not connected is
indicated with no LED light; the LED blinks to indicate activity.
Antenna Mount A reverse SMA connection that supports a 2.4GHz antenna.
ID Button When used in conjunction with NetLinx Studio, sets the device and system
numbers for the NXR-ZGW-PRO.
Press and hold for approximately 30 seconds to return the NXR-ZGW-PRO to
factory default settings.
Re ar Com pone nt s:
Power connector Two power options are available:
• 2-pin 3.5mm captive-wire PWR connector
• Power Over Ethernet (PoE) - powers the device through the CAT5 cable.
Both Power and Data can be transmitted simultaneously through the CAT5
cable when using the appropriate equipment.
Ethernet port 10/100BaseT modular (RJ-45) connector - used to connect the 
NXR-ZGW-PRO to your LAN and/or to connect your third party device to the
LAN when the NXR-ZGW-PRO is used as a gateway.
Certifications: • FCC ID: CWU-NXRZGWPRO
• IC: 5078B-ZGWPRO
•CE
• IEC-60950-1
• Japan Approval
• ZigBee Certified
Operating/Storage
Environments:
• Operating Temperature: -30°C (-22°F) to 70°C (158°F)
• Relative Humidity: 5% to 85% non-condensing
• Intended for indoor use only
Included Accessories: • NXR-ZGW Installation Guide (93-5791-11)
• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)
• Rubber feet
• Velcro mounting strip
• Power Supply (24-5791-SA)
Other AMX Products: • Mio Modero R-3 Remote (FG148-03)
• Mio Modero R-4 Remote (FG148-04)
• NXR-ZRP-PRO NetLinx ZigBee Repeater (FG5791-03)

Overview
3
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
FIG. 2 NXR-ZRP-PRO, front and rear
NXR-ZRP-PRO Specifications
Dimensions (HWD): • 906 x 2.500 x 3.424 (23.01 mm x 63.50 mm x 86.96 mm)
• Depth does not include antenna
Weight: • 0.25 lbs (113.39g)
Power: 10.5 - 18 VDC; 13.5 (nominal operation voltage)
Memory: • 1 Megabit external memory
• 128K microprocessor Flash memory
Radio Specifications: • Frequency: IEEE 802.15.4
• Operating channels: 11 - 26
• Modulation technique: DSS
• Output power: Region/country specific
• Coverage area (N America): 165 feet (50.2m)
Communications The NXR-ZRP-PRO communicates with a Netlinx master via a NXR-ZGW-
PRO. The NXR-ZGW-PRO communicates with a Netlinx master over TCP/IP
encapsulating the ICSP protocol via a physical Ethernet connection. The ICSP
device number can be set via the browser-based management interface.
Front Compone nt s:
LEDs • PWR/STATUS - A green LED that blinks to indicate the device is powered but
not commissioned to a network. A solid light indicates a device powered up
and commissioned; Power OFF is indicated with no light.
•ICSP - The LED is on when the device is connected to the gateway and off
when not connected.
•RF - The LED blinks when RF is active and is off when RF is inactive.
Antenna Mount A reverse SMA connection that supports a 2.4GHz antenna.
Reset Button Press and hold for approximately 10 seconds to return the NXR-ZRP-PRO to
factory default settings.
LEDs
Antenna
RESET Button 2-pin 3.5mm
PWR connector
Front Rear
Antenna
Antenna Mount

2/12 ©2012 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
It’s Your World - Take Control™
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.com