AMX AXC-EM User manual

axcess mini-cardframe
The AXF-MINI Mini-CardFrame accepts an AXC-EM Enhanced System
Master cardand up to three device-specific control cards. It’san ideal solu-
tion for adding a focused amount of control—expanding an Axcess control
system or acting as a specialized Axcess Central Controller.
The Mini-CardFrame can also extend control from an Axcess system to a
remote location. The AXLink data/power bus can tie the Mini-CardFrame
to an Axcess Central Controller up to 3,000 feet away.This application pro-
vides a distributed control architecture with simplified, localized installation
and operation.

AXF-MINI
axcess mini-cardframe
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • SINGAPORE • SPAIN • SWITZERLAND • THAILAND • TURKEY • USA
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • PORTLAND • SPOKANE • TAMPA
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com
©2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
AXF-MINI (FG731)
•Includes built-in Server processor
•Provides three AXC-series control card slots
•Links to other Axcess devices over the AXLink four-wire
data/power bus
•Acts as a Server CardFrame with any AMX Central Controller
•Operates as a Central Controller with an optional AXC-EM
Enhanced System Master card
•Installs easily into rack or shelf, or onto wall using supplied
mounting brackets
•Accepts optional CSB bracket for cable support and wire man-
agement
FRONT PANEL
M1: AXLink LED from optional Enhanced System Master card
1–3: Shows LED status indicators from optional AXC control cards
REAR PANEL
Slots 1–3:Three 16-pin control jacks
Device: 8-position DIP switch sets AXLink device number
AXLink: One 4-pin jack for AXLink data/power bus
PWR: 2-pin jack for +12 VDC power input
ENCLOSURE
Metal with black matte finish
MOUNTING OPTIONS
Rack, wall, or shelf mount
DIMENSIONS (HWD)
1.8" x 17.0" x 13.6"
(45 mm x 432 mm x 347 mm)
(width does not include mounting ears)
WEIGHT
5.5 lbs (2.5 kg)
POWER
12 VDC, 25 mA minimum
Additional power required as cards and accessories added
Includes
•Two mounting brackets
•One 4-pin AXLink connector
•One 2-pin PWR connector
•Other control connectors supplied as required
OPTIONS
AXC-EM Enhanced System Master card
CSB Cable Support Bracket
PS 2.8 12 VDC Power Supply
110/220 VAC, 2.8 A
PS 4.2 12 VDC Power Supply 110 VAC, 4.2 A
CC Series Control Cables