anko 43115785 User manual

DIGITAL
BATHROOM SCALES
INSTRUCTIONS FOR USE
9. If there is error on display or can not turn off the scale for a long time,
please take off the battery for about 3seconds, then install it again to
remove soft-fault. If you can not resolve the problem, please contact
your dealer for consultation.
10. Do not use it for commercial purpose.
MODEL NO.:43115785

ADVICE FOR USE & CARE
1. The platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. DO NOT strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale.
DO NOT use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery
powerislow. Insert or replace new battery.
LOW BATTERY INDICATION
Battery power is low. Please install new battery.
Scale overload. (max. weight capacity is
indicated on the scale).
Please step off to avoid damage.
OVERLOAD INDICATION
RE-TEST
Display " " when you step off the scale, means
this weight reading with error. Please re-test.
TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric(kilograms) and
Imperial (pounds, stones), you can convert weight unit as follow:
BATTERY
TO REPLACE BATTERY
kg
kg
Step2:
Gentlysteponthescale,thenthescale
will be automatically turned on. Stand
evenly on the scalewithoutmovingand
wait until yourweight shownondisplay
is stable and locked.
picture
Openbatterycasecoveronthe
backofscale,ifbatterycaseisthe
typeshowninpicture,
A. Takeouttheusedbatteries.
B. Installnewbatterybyputtingonesideofthe
batteryandthenpressingdowntheotherside.
Please take note to the polarity.
OPERATION
1.5V AAA batteries (Not included)
Step1: To makesureaccuracy, placethe
scale on a hard, flat floor and avoid
carpet or soft surface.
Remark: If the scale is one of our "slim" series
(indicated on package), make sure to put it on
hard surface such as marble, floor tile etc., and
make sure no foreign bodies beneath the scale
before weighing.
AUTOMATIC SWITCH OFF
Whenyoustep off the scale,itwillautomatically
switch off. Auto shut-off occursifdisplay shows
stableweightreading for approximate 8 seconds.
Unit button
iftheunitswitchisonthebackof
the scale,
A. Find unit switch on the back of scale.
B. Press the unit conversion button when scale
is power on, LCD shows current weight unit.
Press the button again to convert weight unit.