anko 43161973 User manual

The product picture is indicative only.
Appearance specifications please in kind prevail.
BodyMonitor
43161973
Software doesn’t obtain reading from the scale
• Check the connection with app
• Check Bluetooth is switched on. Switch on and off, bridge the Bluetooth connection between
scale and smart phone again
• Check battery status
• Relaunch application
Failure to connect to device
• Ensure only one device is connecting to the smart scale
• Make sure the device is equipped with Bluetooth 4.0 or higher.
LCD shows no response
• Check battery status
NOTE: Repairs should not be carried out by unauthorized people.

Thank you for purchasing our smart body fat scales.
Please read and keep the instruction manual for future reference
SAFETY WARNING
1. People with the following conditions should not use this device:
a. Pregnant Women
b. Those with symptoms of edema
c. Those on dialysis treatment
d. Those who use heart pacemakers or other implantable devices
2. Keep area free of water to reduce slip hazards.
3. Children under 10, adults over 70 and body building athletes may show deviation
therefore the scale should only be used in weighing mode.
4. The fat percentage and hydration content evaluation by the Smart Body Fat scale
is only for reference and not for medical purposes. If the readings are higher or
lower than normal and you are worried, consult your doctor for more advice.
1. Scales are to be used on a solid, flat surface.
2. The scales are designed to allow auto step on, ignore the first reading. Correct
readings are from 2nd weighing.
3. Weighing should be done in bare feet.
4. Step on the weighing platform gently, do not kick or drop the scales.
5. For consistency, weigh at the same time each day.
6. Keep away from strong electro-magnetic fields.
7. Measuring after intensive exercise, excessive dieting and when dehydrated can
give incorrect readings.
8. If scales fail to start, check battery and replace if required.
• Bluetooth wireless technology
• Connect with different smart devices.
• Auto on function
• Low battery and overload indicator
• High precision readings
• Records body weight, fat, hydration, muscle and bone percentages and
suggests calorie intake.
Note: Remove batteries when not using for extended periods of time.

Remove shoes and socks before weighing and ensure that feet are in contact
with electrodes on scale.
1. Open App and ensure that Bluetooth is on, step on the scale.
2. Weight is shown on both scale and app. After several seconds, the app will
show body fat, hydration, bone and kcal.
3. Data will be saved.
1.Install batteries and place
scale on a hard, flat floor.
Do not use on carpet or mats.
2.Step on scale to turn on.
Ensure Bluetooth is connected
and screen shows 0.
Connect your smart phone
to measure body fat.
1.Install batteries and place scale on a hard, flat floor. Do not use on carpet or mats.
2.Step on scale to turn on, weight reading will appear on display and will flash after
weight has stabilized.
The scale can display metric unit.
The switch is located on the back of the scale.
AUTOMATIC SWITCH OFF
The scales will automatically switch off.

Warning indication Statement
Maximum weight
has been reached
Replace batteries
Remeasure required
Meaning
1. Avoid extreme temperature
2. Use on an even hard floor
3. Do not drop or kick scales as they can break
4. Do not use abrasive cleaners
Connect to