anko KM43074815 User manual

Bluetooth®
Speakers
Operating instructions
KM43074815
includes:
•Bluetooth speakers
•Charging cable
WARNING Do not dispose of unit in fire or water. • Never attempt to disassemble and reassemble. • Waste
electrical products should not be disposed of with household waste, please recycle where facilities exist. • Check
with your local authority for recycle advice. • Keep your device and all accessories out of the reach of children
and animals. • Small parts may cause choking or serious injury if swallowed. • Avoid exposing your device to
very cold or very hot temperatures (below 0˚C or above 35˚C). • Extreme temperatures can cause deforming of
the device and reduce the charging capacity and life of your device. • Do not allow your device to get
wet—liquids can cause serious damage. • Do not handle your device with wet hands.

Pairing the speaker with
Bluetooth devices
• Once the speaker is powered on,
it is in pairing mode (LED flashes ) and
will pair to the last paired device
(if available).
• Pair the speaker in Bluetooth menu in
mobile phone and once it is paired, you
can hear a pairing tone and the LED
will o.
Bluetooth Name: KM43074815
Phone calls
• Press button to pick up/hang up
phone calls.
• Double press the button to call the
previous number dialed.
Playing music
When the speaker connects with the
mobile phone via Bluetooth you can
enjoy music through the headset
wirelessly.
Battery Charging
This Bluetooth speaker is powered by
rechargeable Li-ion battery.
Please use the accessory USB cable
to recharge the battery.
•Insert USB charging cable into a
suitable USB port.
•Connect charging cable with the
headset USB port .
•Indicator LED turns RED to show
battery is charging.
•Indicator LED turns OFF when
battery is fully charged.
•It takes about 2 hours to fully
charge the battery.
Model No:
KM43074815
Version:
V5.0
Support profiles:
A 2 D P, AV R C P, H F P
Working Distance:
10 meters
Music Time:
>3 Hours
Talk time:
>3 Hours
Standby time:
>100 Hours
Charging voltage:
5V d.c.
Charge time:
2 Hours
Pairing window time:
5 minutes
Function overview:
Function Operation
Pause Short press button
Play Short press button
Next Song Short press button
Previous Song Short press button
Volume Up Long press button – when
the volume is adjusted to maximum you
will hear a voice indication tone
Volume Down Long press button
Power ON / OFF
Power ON
Press and hold power button 3s.You will
hear a voice indication tone
Power OFF
Press and hold power button 3s.You will
hear a voice indication tone
How to use these speakers:
Statement
•High or low extreme temperatures that a battery cannot be subjected to during use, storage
or transportation and low air pressure at high altitude.
•Replacement of battery with an incorrect type that can defeat a safeguard
•Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
that can result in an explosion.
•Leaving battery in an extremely high temperature surrounding environment that can result in
an explosion or the leakage of flammable liquid of or gas
•A battery subjected to in an extremely low air pressure that can result in an explosion or the
leakage of flammable liquid of or gas
•CAUTION: Risk of explosion if the battery is replaced by an incorrect type
Next song / Volume up
Power on/o Previous song /
Volume down
Charge port
Specifications:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.,
and any use of such marks by KMART AUSTRALIA is under licence.
Play / Pause / Phone
Answer call/Hang up
/Redial