annke DN41R User manual

DN41R/DN81R/DT41Y/DT81Y
How to add IP camera I21AE to DVR DT81Y?
1. Use phone to connect camera to network and make sure phone is able to see
camera's image.
Here is instruction.
http://support.annke.com/kb/index.php?action=artikel&cat=26&id=373&artlang=e
n
2. Connect DVR to router with cable.
Please make sure the router is the one which sends wifi to connect IP camera.
3. Go to camera management of DVR on TV to search camera's IP and add it to DVR
system.
4 Click + icon to add camera. The device Status will change to yellow triangle
(indicating user name and password wrong),
5.Click Edit to input the right password of the IP camera.
If you did not set a password for the camera, the default user name
is admin default password is admin+Verification code at bottom of camera.
Page 1 / 3
(c) 2020 Annke KB Team <[email protected]> | 2020-07-11 14:21
URL: http://support.annke.com/kb/content/28/374/how-to-add-ip-camera-i21ae-to-dvr-dt81y.html

DN41R/DN81R/DT41Y/DT81Y
6. Return to the main interface, move the mouse to the top on the main interface to
switch to Multi channels display and get the additional IP camera channel(I21AE)
If you want to disable alarm push function, here is instruction.
1 Run Annke Vision to refresh the device list. Tap I21AE and enter settings.
2 Select Alarm Notification and turn the Notification Sound Mode to Mute or just
turn the Alarm Notification off.
Page 2 / 3
(c) 2020 Annke KB Team <[email protected]> | 2020-07-11 14:21
URL: http://support.annke.com/kb/content/28/374/how-to-add-ip-camera-i21ae-to-dvr-dt81y.html

DN41R/DN81R/DT41Y/DT81Y
Unique solution ID: #1376
Author: LeiTian
Last update: 2018-06-16 11:11
PoweredbyTCPDF(www.tcpdf.org)
Page 3 / 3
(c) 2020 Annke KB Team <[email protected]> | 2020-07-11 14:21
URL: http://support.annke.com/kb/content/28/374/how-to-add-ip-camera-i21ae-to-dvr-dt81y.html