Anoa EX User manual

Revolutionizing Your Personal Mobility
User Manual

Brand Introduction Contents
As with all our skutis, the Anoa got its brand name from an animal. The
Anoa is the smallest species of buffalo in the world and weighs anything
from 150 to 300 kg. It inhabits mainly the mountains and lowland rainforest
of Sulawesi, Indonesia. We believe it matches the power, colour, and
uniqueness of our Anoa skutis.
“Please read this manual carefully before using the product. Failure to follow these instructions
may result in property damage and serious injury. If you have any problems with your Anoa EX /
EX+, please contact our head office for technical support ([e-mail]).”
Warning Indicates a potentially hazardous situation that could result in injury or damage.
1. General safety guidelines and restrictions ········································
04
2. Safety precautions for Lithium-ion battery ·······································
06
3. Product components ·············································································
08
4. Name of each part ·················································································
09
5. How to use the product ··········································································
10
1) How to assemble ························································································
10
2) How to unfold your skutis ···········································································
11
3) How to fold ···································································································
12
4) How to charge ····························································································
13
5) Memo ···········································································································
15
6) Checklist before using ················································································
16
7) How to start ································································································
18
8) How to stop ·································································································
19
9) How to control dashboard ·········································································
20
6. Maintenance ···························································································
22
7. Technical specifications ·········································································
26
8. Maintenance record ················································································
27
Company Introduction
“Skutis Corporation Pte. Ltd. is one of the leading distributors for
e-scooters (skutis) and accessories in Indonesia, Singapore, and Timor-
Leste.
Based in Singapore, Skutis Corporation (SC) embodies the latest technical innovation,
offering an efficient, practical and environmentally friendly way of transportation. SC
is determined to provide its customers a complete range
of service, which includes maintenance and provision of
various modern accessories. Sustainability and social
responsibilitycount to SC’s highest values, which is why
SC is also engaged in social and environmental projects in
Indonesia.”

04 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 05
General safety guidelines and restrictions
5. For safety reasons, beginners should practice in a wide area and in slow mode first.
6. This product is for one person and it is prohibited by law to ride with an infant or ride
with two passengers. It can cause accidents and break the product.
7. Replace sentence with “Keep both hands on the steering handle at all times
8. Change sentence to “Check the operating condition of the brakes regularly and do not
use your skutis, when you are noticing any abnormality.
9. Do not stop the scooter with your foot without using the brakes. Always use the rear
brakes. Be careful as there is a risk of overturning when the front brake is applied
suddenly while riding.
1. Be careful of water!
The Anoa EX / EX+ is not waterproof. Never use it, when it rains or snows or
if the road is wet or icy. Electric devices, motor or battery could get damaged,
which can result in malfunction or fire. Water damages will not be reimbursed;
even during the warranty period.
2. Beware of folding and spinning parts!
If parts of the body, as a finger or hair, get caught in the spinning or folding
parts of the product, this may lead to severe injuries. Before riding, insure
that no loose clothing or shoe lace will be caught in the wheels to prevent
accidents.
3. Don’t tune by yourself. Electric shocks can occur!
Do not open or tune the electric parts (battery, controller or motor system).
This can cause malfunction or fire. In such a case, damages will not be
reimbursed; even during the warranty period.
4. Wear safety equipment and abide by the local road traffic law
All vehicles involve risks and require certain safety measures. Make sure to
wear a helmet and further protective gear (e.g. knee and elbow protection)
and follow the local road traffic law.
10. Remember that the braking distance prolongs in relation to speed.
11. Never ride your skutis in a crowded area, on a steep slope, or on uneven or slippery
surfaces.
12. Slow down before speed bumps or other obstacles to prevent accidents or damaging
the product.
13. The handlebar is designed to change direction and balance. Do not push or pull it with
excessive force. If the handle bar feels loose, stop riding and check the head bearing.
Fasten the bolt or nut if needed, before you continue riding your skutis.
14. Please, only charge your skutis with the dedicated charger provided. A non-compliant
charger will damage the circuit or battery. Such damages will not be reimbursed;
even during warranty period.
15. If your skutis was flooded, disconnect it from the power supply inside the battery box
and do not try to charge it. Your maintenance provider will need to check the skutis for
you. Note that water damage is not covered by any warranty.
16. Do not apply excessive force to the kickstand. Only ride with the kickstand folded up.
17. Children under the age of 14 are prohibited from using the AnoaEX / EX+.
18. Make sure to keep the tire pressure high, as it may get punctured otherwise while
riding. We recommend a pressure of 45 PSI.
19. Do not do stunts or jumps on the product. Exposing the battery to excessive shock
may result in fire. In case of a crash, remove the battery from the product to check
whether it is still undamaged and working well.
Warning

06 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 07
Safety precautions for Lithium-ion battery
Li-Ion
1. Only use the charger that was supplied with your skutis to charge the
lithium-ion battery. Using an unauthorized charger could cause fire or
serious damage to the battery.
2. Charge lithium-ion battery within 0-45˚C and discharge within -20-60˚C.
Charging and discharging the battery not within the appropriate temperature may
damage the lithium-ion battery.
3. Do not leave lithium-ion battery in any place exposed to direct sunlight or high
temperature. Always store it in dry places.
4. Charge the lithium-ion battery in a dry open, and well-ventilated place. Do not charge
the battery near inflammable goods.
5. If you bring your skutis in winter from outside to inside, the change of temperature
may cause dew condensation. In this case, do not charge immediately but wait for the
battery to cool down. Otherwise, the battery’s lifetime and capacity might get reduced.
6 . If the battery protection circuit is damaged, the battery emits an unusual smell, or
the battery leaks, contact an authorized service centre immediately and get technical
support.
7. Keep the lithium-ion battery in a safe place out of the reach of children and pets.
8. Do not reverse the polarity of the battery. This may lead to a short-circuit.
9. Connecting the charger while the skutis is waterlogged creates a very high risk of fire
or electric shocks. In this case, the battery should get checked by an expert, before it
gets charged again.
10. Do not disassemble or incinerate the lithium-ion battery. Dispose the battery as
industrial waste and be careful that no short-circuit occurs in the terminals.
11. If the battery requires replacement after long-term use, replace it with a new one
through an authorized dealer. The discharge capacity of the lithium-ion battery
normally decreases more than 15% after 300 times of cycle use.
12. You can increase the lifetime of your lithium ion-battery by up to 50% if you
only charge it after it is about 50% empty and if you charge or discharge it in
temperatures between 18 and 25 Celsius.
13. External temperature has great impact on the battery. The performance of the
battery degrades with lower temperature, which leads to decreased power and riding
distance. However, the battery usually returns to its original state, when the weather
or surrounding temperature gets warmer again.
14. When the product needs to be stored for a longtime without using, have the battery
charged around 70-80%.
15. If a lithium-ion battery product overheats, smokes, or burns, you must stop charging
and using the product immediately. In such a case, move the product outdoors as
quick as possible, and use a fire extinguisher to extinguish any fire. Do not use water
to extinguish fire on the product, since this can create additional danger!
How to manage your lithium battery
(1) Battery maintenance in summer
1. Avoid rain or wet roads. Battery and
core components may be damaged
by flooding, which can result in
malfunction or fire.
2. Avoid direct sunlight in summer and do
not store or charge it in a car trunk or
hot room.
(2) Battery maintenance in winter
1. Avoid snowy, frozen or wet roads.
Battery and core components may be
damaged by flooding, which can result
in malfunction or fire.
2. Store the battery in a dry place at room
temperature (10-20°C).
3. In winter, after riding wait for 2 hours
to let the battery cool down before
charging.
Warning

08 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 09
Product Components Name of each part
Please check if the contents of your box are complete immediately. If you need
assistance assembling the product, please contact your authorized service centre.
After opening the box, note the
serial number and keep it to easily
recognize your personal Anoa
EX / EX+. In case your Anoa gets
stolen, the serial number might
help you to get it back.
Check the components inside the box
1) LCD dashboard
2) Finger
throttle
3) Front wheel
disk brake lever 7) Handle extension
10) Handle,bottom pole
9) Adjustment lever
(QR lever)
13) One touch
folding lever
17) Front 10”
wide tube tire
22) Rear suspension
18) Controller
23) Rear fender /
rear drum brake
25) Rear 10”
wide tube tire
24) Taillight
(Brake light)
20) Charging port
26) Kickstand
14) Headlight
11) Folding lock
12) Fork
19)Lithium-
ion battery
21) Deck
(footrest)
8) Mounting part
5) Rear wheel servo brake lever (electric brake)
6) Light button
4) Handle grip
Skutis (lithium battery already installed inside the skutis board), charger (2A), charging
cable, manual (if no manual is included, ask your service centre for a soft copy).
*To start riding, turn on the 1) LCD dashboard. As a short time anti-theft function, the power
dashboard will not switch on, if the light button is activated.
How to check the product serial
number
After your skutis was assembled 15) Delete (Front
mud cover)
16) Front suspension
Important

10 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 11
How to use the product
1) How to assemble 2) How to unfold your skutis
1. Raise the handlebar first, then lift the
body (deck part) with both hands and lift
it slowly to prevent damaging the folding
part.
2. Caution: The inner shaft may be damaged
due to the heavy load, when only lifted by
the handlebar.
To unfold the handlebar, raise it in
the direction of the arrow until it is
locked automatically. After unfolding,
make sure that the folding lock of the
handlebar is properly inserted in the
direction of the arrow as shown in the
picture below.
To unfold, push the folding lever down
and pull the handlebar up. After the
handlebar is unfolded, raise the folding
lock in the direction of the arrow and fix
it firmly.
Unlock the height adjustment lever
(QR lever) and adjust the height
of the handlebar. You can choose
between three different heights. After
adjustment, the QR lever must be
locked again.
1. The dashboard is not attached to the
product at first.
2. Use an Allen key inside the dotted circle
to release the screws.
3. Adjust the position of the dashboard as
shown in the picture. Make sure that
there is sufficient space between the
finger throttle and the front wheel disc
brake lever so that you can use both
quickly and conveniently. Then tighten the
screws again with the Allen key to finish.
(1) Unp acking the produc t
(3) Unfold the handlebar
(1) Raise the front bar
(2) Adjusting height of handlebar
(2) Assembling dashboard
❸
Folding lock
height adjustment
lever (QR lever)
Fit to the height
adjust hole
Folding lever
Warning
Warning

12 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 13
3) How to fold 4) How to charge
After releasing the QR lever as shown
in the picture, push the small golden
coloured ball stopper inside, while
pushing the handlebar down.
1. Open the charging port cap and connect the charger to the charging
port. Afterwards, connect the charger into a standard household
power socket.
2. If the charger’s LED light is red, your skutis is getting charged, but not
fully charged yet. If the light is green, your skutis is either already fully
charged or your charger is only connected to the power socket, but not to the skutis.
3. Make sure to close the charging port cap before riding or storing your skutis. Only
open it for charging purposes. Never let the charging port get in touch with any kind of
liquid!
4. When connecting the charger to the charging port, metallic sparks due to the voltage
difference may occur, but this is normal.
5. Make sure to only use the genuine 2A charger. If you are using a non-standard
charger, it can cause electrical malfunctions and serious damage to the battery.
You can fold the front bar by pushing it
towards the deck while pressing down
the folding lever.
Pull the handlebar lock in the direction
of the arrow to release it.
(2) Push the handlebar
(3) Folding the front bar
(1) Folding handle
Charging port
How to use the product
Folding lock
height adjust fixing
lever(QR lever)
QR lever releasing
status
(1) Standard charging method.

14 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 15
How to use the product
1. Do not use the charger and contact your authorized service centre if the lamp of the
charger is not turning on, if an external shock occurred, or if the cable or cable cover of
the charger is damaged.
2. Charging terminals should be firmly contacted when charging. Do not use if terminals
are corroded.
3. Do not remove the terminal while charging. This can cause considerable stress on the
charger's internal circuitry.
4. While charging, do not put any drink or other liquids that can be easily spilled next to
the charger.
5. While charging, do not operate the motor of the skutis or any other electric devices that
are connected to the battery.
6. Do not use the charger in places with high humidity, hear, or flammable materials.
7. Do not modify the charger.
8. A charger failure may cause fire, while charging. Hence, you should disconnect the
charger before you are leaving the charging place for a long time.
9. If the charging process is not completed after a long time, do not continue using the
charger and contact an authorized service centre.
10. Children may only use the charger under the supervision of a guardian.
11. Do not insert metal into the charging hole.
12. After unplugging the charger, do not touch the plug for about 10 seconds.
13. Do not attempt to disassemble, open, crush, bend, deform, perforate, shred or
submerge the charger.
14. Avoid dropping the charger or exposing it to any other kind of excessive shocks.
(2) Advice for beginners, pregnant women, and elderly people MEMO

16 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 17
5) Checklist before using
Before each ride, you have to check, whether your front and rear brake is
operating normally. If you notice any problems, adjust the brake(s) first. If a
brake is damaged or worn, bring it to an authorized service centre.
(2) For beginners, pregnant women, and elderly people
Beginners and elderly people should only use slow mode as
there is a high risk of causing accidents, when using high speed.
Pregnant women should not ride skutis.
(3) Do not accelerate downhill
If you accelerate while riding downhill, the braking distance might
become too long, which causes danger. If you are riding downhill
for a very long distance, the brakes may overheat and stop working
properly. For these reasons, you should not accelerate, while riding
downhill.
(1) Wear safety equipment
This product bears the risk of danger due to high speed. Safety
equipment must be put on before use. All users must wear a
helmet, additional protectors (knee, elbow, palm), and closed
shoes.
(4) Caution: Motor and brakes may cause fire
The motor and brakes (especially the disc rotor)
increase in temperature when running which may
result in fire.
Important
notice
(7) Check whether the QR levers are fixed before riding
Make sure that the QR levers are
correctly fixed (as shown in the
picture) before riding. If any QR
lever is loose, the front bar may
suddenly fold while riding, which
may lead to an accident.
(6) Check all parts are fixed before riding
Before riding, always check that the bolts and nuts
are tightened, especially the steering bolt at the
bottom of the front fenders, where the front bar is
connected to the front wheel. Parts may loosen due to
vibration from continuous riding. If you lost any part,
stop riding immediately and replace the part or visit
the nearest authorized service centre.
(5) Always lift with two hands
Always lift your skutis from the body (deck) with both hands. The
folding part may get damaged if the product is only lifted by the
handle or front bar.
* Stop riding immediately, if…
1. ... the skutis creates an unusual noise. Consult the nearest authorized service centre
in this case.
2. ... you feel there is a problem with the operation of the skutis. This may include an
error message on the dashboard, an extraordinary hot motor, malfunction of the brakes,
etc. Please, consult the nearest authorized service centre in this case.
Warning
Warning
How to use the product

18 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 19
6) How to start
Press the power button on the
dashboard for two seconds to turn it
on. The speed mode can be altered
by pressing the power button once
and then using the MODE-button. To
confirm, press the power button again.
(2) Turning on the dashboard
If the light button is pressed before
the skutis is turned on, the dashboard
cannot be switched on. Hence, before
turning on the power, check that the
light button is not pressed.
(1) Turning on the main switch
Accelerate by using the throttle of the
dashboard. Decelerate and stop by
using the brakes on both handles.
(4) Acceleration and deceleration
(3) Stance for riding
After pivoting the kickstand up, find a
stable position on the deck and hold
the handle grip comfortably.
7) How to stop
Use the rear brake to decelerate
slowly. Be careful as there is a risk of
overturning when only the front brake
is applied while riding. The safest way
of decelerating is to use both brakes
simultaneously.
Always use the front and rear brake
levers together to stop smoothly and
safely after decelerating with the rear
brake.
Set whether to use the electric brake
and decide on the strength among
the detail functions of the dashboard
before use. The electric brake works
together with the brake lever of rear
brake, which increases the braking
power.
Be sure to check for any external
deterioration on the brake cables
(bending, disconnection, etc.) before
riding. Do not use your skutis if the
braking force drops considerably
and let the brakes be inspected and
repaired immediately.
(1) Decelerate with rear brake
(2) Stop safely
(3) Electric brake
(4) Check brakes regularly
How to use the product

20 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 21
Power button
Battery remaining
Accelerator
Mode button
Speed
Speed unit
Speed mode
Speed mode
8) How to control
the dashboard
Change the speed mode when the dashboard is on. To display the current speed mode,
press . The number for the speed mode will start blinking. Then press multiple
times to set the speed (L1 – low speed, L2 – medium speed, L3 – high speed). Press
to confirm.
(1) Adjusting the speed mode
* Please note, that the slow start setting P7 (start mode) does not work if you selected
speed mode L1.
* When selecting the L3 speed mode (high speed), during full acceleration the speed
displayed on the dashboard may temporarily differ to the actual speed.
Information
Press again to finish all settings and
return to the main screen.
Mode Display values and settings
P0 9 (unalterable)
P1 43.0 (unalterable)
P2 15 (unalterable)
P3 0 (fixed)
P4 Speed display: Km/h(0), mp/h (1)
P5 Start mode: Accelerator start (0),
start after kicking (1)
P6 Cruising mode (auto riding):
Off(0), on (1)
P7 Start speed: Power start (0), slow
start (1)
P8 Max. speed setting: 1 to 100%
P9 Electric brake power: Off (0),
medium (1), hard (2)
(3) Returning to the main screen after setting details
(4) Detail functions
Each time you press the button
briefly, the mode changes to the next
mode.
(2) Mode settings
Mode Description
TRIP Current mileage (Press
and hold the mode button
to set "0")
ODO Total mileage
CHA Not used
VOL Current voltage(Volt)
DST Not used
TIME1 Elapsed time, since dashboard was switched
on
TIME2 Not used
* Note: The voltage displayed in VOL mode
has about 1V to 2V difference from the
actual batter voltage.
(5)
(6) Features of cruise mode (7) Adjusting the intensity of the
electric brake
Press simultaneously for about 2-3 seconds to enter the
P0 mode (detail function settings) > Press to move between
P0 mode and P9 mode >Press to change setting value >
When changing the setting value press button to change the
setting value. > Press the to increase and to decrease
the value > Press simultaneously for about 2-3 seconds
again to confirm all new settings.
P0
09
Ex) P0 default
value setting
The cruise control function allows you to
maintain the riding speed automatically.
This is convenient for the rider for long
distances and has the advantage of
saving battery consumption.
The Anoa EX / EX+ is equipped with a physical
brake for the front and rear wheels, which can
be activated by pulling the physical brake lever
on the handle. Additionally, the electric brake
can be activated in the P9 detail function settings
on the dashboard. If “0” is selected, the electric
brake is off, “1” will assist with medium intensity
and “2” with strong intensity.
* Starting the cruise function
a. Select the cruise mode before riding,
as explained in section (5) above.
b. If the throttle is kept at the same
acceleration for about 7 seconds, the
cruise mode will start automatically.
* Ending the cruise function
When you hold and release the brake
while the cruise mode is running, the
cruise mode is automatically cancelled.
* Precautions when using the cruise function
For your safety, be sure to travel in a
position where the brake can be applied
immediately in order to respond to
any unforeseen incidents. in order to
respond to any unforeseen incidents.
* The electric brake will not operate,
when the battery is fully charged
Do not use the electric brake immediately
after full charging. For your safety and to
enhance the lifetime of your battery, it
is recommended that you do not use the
electric brake with a fully charged battery.
Only use the electric brake, when more
than 5% of the battery capacity was used.
Warning
Warning
How to use the product

22 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 23
Maintenance
(1) Check brake and cables
• Before riding, make sure that your brakes are functioning well.
• Do not use your skutis if the braking power has dropped considerably and
let it be inspected and repaired immediately.
• Before riding, make sure that the brake pad is not worn and that no cables
are loose or damaged.
• The brake cable may wear off depending on the user’s riding style and
environment. If there is an unusual sound or feeling when operating the
brake lever, check if the inner wire of the cable is partially broken, worn
or deformed. This might occur as a result to careless repetitive handle
folding. If the braking cable is broken the braking mechanism might
become ineffective.
• Make sure that the bolts, nuts and the various fixing parts of the brake are
not loose, and the disc is not deformed or damaged.
(2) Check tire pressure and condition
Check the condition of the front and rear tire before each ride. Try to keep the
pressure at 45 PSI (optimum) and make sure there are no signs of wear or
puncture. When the air pressure is insufficient, the travel distance shortens
and the possibility of punctures increases.
• Sudden stopping may lead to uneven wear of the tires which can cause
danger. Therefore, it should be judged according to appearance when a tire needs to be
replaced.
(3) Check whether all parts are tightened and secure
• Always check thoroughly before use that all bolts and nuts are securely
tightened.
• Check that the folding part and handle are properly fastened.
1) Routine checking before and after riding
(4) Check which parts have to be replaced
Spare parts such as tires, tubes, discs, pads, cables, brackets, forks etc.
wear off at different times. Therefore, periodic inspection and maintenance is
required.
(5) Electric products can be damaged by various factors!
As with all machines, this product may fail due to a number of factors. The durability of each
part may differ depending on riding habits. Brake cables and other cables as well as forks
or brackets can be worn off or bent depending on the riding style and environment. As the
deterioration of parts often is not visible, it is highly recommended to visit an authorized service
centre for safety inspections and replacement regularly.
Warning
Warning

24 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 25
Maintenance
2) AnoaEX / EX+ self-maintenance
Brake
arm
(1) How to adjust the front brake
Hold the brake wire with the long nose pliers and use a 5mm hexagon
wrench (Allen key) to unscrew the brake arm mounting bolt slightly. Lift
up the brake arm so that the brake space narrows and the brake becomes
stronger.
(2) How to adjust the rear brake
Hold the end of the wire with long nose pliers, as shown in the picture and
turn the brake adjusting nut clockwise with a wrench. Look out: If the nut
is turned too much, the brake pad may touch the tire.
(4) How to adjust folding lock(Fixing lever)
When the (1) 10mm tension adjusting nut is loosened, the (2)folding lock
(locking lever) of the folding part may become loose and the locking of
the lever may be released while riding. To tighten, turn the nut clockwise.
(1)
(2)
* CAUTION: If used in a loose state for a long time, the folding part may be
damaged. This could result in it folding while riding, which can
lead to an accident.
(3) How to adjust the handlebar
Use a hexagon wrench (Allen key) to tighten or loosen the handlebar folding
mechanism, as shown in the picture.

26 Anoa EX / EX+ User Manual Anoa EX / EX+ User Manual 27
Tech nica l specicat ions
Product
Name Anoa EX / EX+ Note
Motor type 52V MAX 1600W(Rated 1000W)
600W BLDC HUB motor
Battery type EX EX+ Li-Ion Battery
Battery
capacity
EX(1077Wh) EX
+
(1398Wh) 52V
Product
weight Around 25kg+ Battery included
Charging
hour 10 hr+ 13 hr+ 2A charger basis
Riding
mileage 45~55km 60~70km 60kg load
25 degrees of outside temperature
Flat road at constant 15 km/h speed (best
condition)
Max speed 15km/h(L1), 35km/h(L2), 50km/h(L3)
Folding
Front bar / handlebar one touch quick
folding (3 steps height adjustment
function
Gradeability Around 27%
Max Load 120kg Under 100kg is recommended
Unfolding
size 112 x 57 x 123cm Length x Width x Height
(Deck width 19cm, Handle width 57cm)
Folding size 112 x 19 x 45cm
Length x Width x Height
(Folded handle width 13.5cm)
Dashboard Finger throttle LCD dashboard
Power ON/OFF(Battery level, voltage,
trip, ODO, riding time, riding speed and
mode change function)
Brake
system
Front: Disc brake; rear: Mechanical
expandable drum brake/electric
brake (can be switched off)
Electric brake charges battery
automatically
Suspension Front and rear dual suspension
Light high brightness headlight, taillight 1600lumen
(taillight includes brake light function)
Tire size 10inch(10x2.5) Wide tube tire
(Proper air pressure 45psi)
Tire width
Around 6.5cm
Product
material Aluminium allow (main frame, front bar), ABS (cover)
* Parts and specifications may change without notice to improve the quality and safety of the product.
* The mileage on the above specifications is measured on 60kg loading, ECO mode(15km / h), and flat road
continuous(nonstop) riding. If the riding environment and riding method are different, riding mileage may
be different.
* The mileage can be greatly affected by the loaded weight, the outside temperature, the wind direction
(wind speed), the road surface condition, the slope, the tire pressure and so on.
To ensure best performance of your skutis and to keep its market value higher, we
recommend recording all maintenance work that was done on your skutis. Please, ask
your qualified maintenance service provider to fill out the maintenance record table
below:
Model Date of 1st Purchase
Serial Nr. Retailer
Skutis Owner 1st Owner 2nd Owner 3rd Owner
Maintenance Data
Date Service Provider Service description or notes in general
Maintenance record

Anoa EX / AnoaEX +
Skutis User Manual
Be Part of the Revolution!
HEADQUARTERS (Singapore)
{No customer service, management only}
SkutisCorporationPteLtd
Reg.No./UEN: 201619761Z (ACRA)
SixBatteryRoad, Level 42
Singapore 049909
[email protected]
OPERATIONAL HEADQUARTERS (Indonesia)
{For customer service and main showroom}
Business Reg. No.: 162634/IU7T/2017 (BKPM)
Canggu Square - Unit 7, Jl. SubakSariNo. 11
Canggu, KutaUtara, Bali,
Indonesia 80361
[email protected]