TurboWheel Dart User manual

Turbowheel Dart: Dashboard Settings
Enable the Settings Mode: Pressing the Power + Mode
simultaneously will enter the Dashboard setting mode.
Short pressing the power button will toggle through the 10
available settings for the scooter
Toggling through
the Settings
Changing the
P Value
Once you have the P setting you wish to change, press the mode
button will increase value, the power button to decrease it
Setting the
Change
Holding the mode button will set the value & return you to the P
menu. Also, after 5 seconds the Dash will return to the main screen.
2
P01: Backlight. Range 1-3, 3 = Brightest
P02: Units. 1 = MPH, 2= KPH
P03: Battery Voltage. 24, 36, 48, 52, 60.
Default = 48V
P04: Dash Timeout. Range 1-60 minutes
Default = 10 minutes
P06: Tire Diameter. Default = 8.5
P07: Motor Poles. Default = 30
P08: Power Output. Default = 100
P11: Regenerative braking. Range 0-5
Default = 0 off, 5 = strongest
P09: Kick-off Start. Default = 0
1 = Push to start
P15: Low voltage cut-off. Default = 39
P12: Acceleration Power. Range 1-5
Default = 3
P17: Cruise Control. Default = 0, Off
1 = Enabled

Turbowheel Dart
LG 12.8Ah 48V, 614Wh
Front disc, rear drum + regenerative
Front disc, rear drum + regenerative
500W rear-hub motor
Twin front & rear lights, with braking mode
Front spring & dual-rear shock absorbers
39.5 lb
~25 MPH
~30 Miles
Turbowheel Dart: Technical Specifications
3

Turbowheel Dart: Unfolding
4

Turbowheel Dart: Folding
5

6

7

8

9