Anolis ArcLine 6 User manual

1
User instructions
ArcLine 6
The module generate colored light by means of Luxeon LEDs.The product was designed to use with the
ArcPower drivers and for indoor use only.
1.Attention
Do not install the module near high inammable liquids or materials
Do not allow anything to rest on the module
Do not use the module near high humidity or water or expose to the rain
Do not install the module near the naked ames
Do not install the module in dirty,dusty or badly ventilated location
2.Installation
The ArcLine unit should be connected to the ArcPower driver according to the LED colour
variants (RGB,WW,CW...).
See the ArcPower 36/72/144/360/384 R.M./16x6/16x12 (or their smartwhite variants) user manuals for full
details of mains power requirements and DMX operation.
ArcLine units are supplied with 1.5 m of cable for direct connection to the ArcPower drivers.
CAUTION!
Avoid looking directly into the LED light beam at close range!
Maximum possible number of LED modules connected to the one ArcPower 36 (or one LED output of the
ArcPower 72/144/360) is mentioned in the table below.
Module
(colour variant)
Total
LEDs
Red
LEDs
Green
LEDs
Blue
LEDs
Amber
LEDs
Cool
white
LEDs
Warm
white
LEDs
Max.number
of connected
modules
Compatible power
supplies
ArcLine 6 RGB 6 2 2 2 - - - 6 ArcPower 36/72/144/360/
/384 R.M./16x6/16x12
ArcLine 6 CW 6 - - - - 6 - 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360
ArcLine 6 WW 6 - - - - 6 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360

Module
(colour variant)
Total
LEDs
Red
LEDs
Green
LEDs
Blue
LEDs
Amber
LEDs
Cool
white
LEDs
Warm
white
LEDs
Max.number
of connected
modules
Compatible power
supplies
ArcLine 6 R 6 6 - - - - - 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360
ArcLine 6 G 6 - 6 - - - - 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360
ArcLine 6 B 6 - - 6 - - - 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360
ArcLine 6A 6 - - - 6 - - 6 ArcPower SmartWhite 36/72
ArcPower SmartWhite 144/360
3.RJ45 pin connection
Colour variants
4.Technical specications
Max input current: 350 mA
Maximum power consumption: 6.8 watts
Compatible power supplies
for RGB,RAB variants: ArcPower 36/72/144/360/384 Rack Mount/16x6/16x12/
Compatible power supplies for
single colour variants: ArcPower SmartWhite 36/72/144/360
Operating ambient temp. range: -20°C/+40°C
Operating temperature: +50°C@ambient 25°C
Cooling : convection
Beam angle: 170°
LED device: 1Watt Luxeon
LED colour Variants *: RGB,R,G,B,A,CW,WW
Warm white LEDs (WW): 3300 K
Cool white LEDs (CW): 6500 K
Typical lumen maintenance: 70%@ 50,000 hours
Led life expectancy: minimum 50,000 hours
Construction: precision extruded alluminium
Weight: 0.48 kg
Installation method: Integral univers. mount. system
Ingress protection: IP 2X
Flammability: 94HB ame class rating
Power/data plug: RJ45
Power/data cable 24 AWG x 4P,category 5e
* RGB - red&green&blue;R- red;B-blue;G-green,A-Amber,CW-cool white;WW-warm white;
The above-mentioned model is avalaible with the side power supply connection or rear power supply connection.
2
Pin Colour of wire RGB Single colour
1 white/orange Red LED + LED 1+
2 orange Green LED + LED 2+
3 white/green Blue LED + LED 3+
4 blue Not used Not used
5 white blue Red LED - LED 1-
6 green Green LED - LED 2-
7 white/brown Blue LED - LED 3-
8 brown Not used Not used
RJ45 plug
(View facing pins)

5.Dimensions
(All dimensions are in mm)
6. Accessories
- Allen key............1 pcs
- Splitter (P/N 13050690)................1 pcs
7. Maintenance
- Keep the module dry.
- Operate only in places where the su󰀩cient airow to cool the module is present
- Periodically clean the front transparent cover.Use a moist, lint-free cloth. Never use alcohol or
solvents!
3
Version 1.0 November 29, 2016
Specications are subject to change without notice.