Anolis ArcSource Outdoor 48 MC User manual

1
User instructions
ArcSource Outdoor 48 MC (Spot, Medium, Flood)
The product generates colored light by means of high power LEDs.The product was designed for exterior use
and it is ideal for locations where signaling,directional or e󰀨ect lighting is required.
1.Attention
Consider the respective national norms during the installation!
Do not install the unit near naked ames.
Avoid using the unit in locations subject to possible impacts.
Do not attempt to dismantle or modify the unit.
Do not install the module in badly ventilated location
Avoid looking directly into the LED light beam at close range.
2.Installation
The ArcSource Outdoor unit should be connected to the ArcPower 384Rack Mount, See its user manual for
full details of mains power requirements and DMX operation.
Only one ArcSource Outdoor unit can be connected to the LED output of the driver.
Connections:
1. ArcSource Outdoor 48 MC

2
2. Adapter cable Chogori/ RJ45 (it is not a standard part of delivery)
3. Adapter cable Chogori -Chogori (it is not a standard part of delivery)
The ArcSource Outdoor unit can be arranged in any position orientation. LED module body is mounted on a steel
“U” bracket for “ tilt” adjustment, after adjusting desired inclination, secure the LED module bode by means of
the Allen key 8. For fastening the unit on the wall (truss etc) serves 3 apertures in the U-bracket .
Top hat (half top hat) installation
3.Technical specications
Max input current (per colour ): 700 mA
Maximum power consumption: 120 Watts
Comp. power supplies: ArcPower 384RackMount, ArcPower 48 Outdoor
Surface temperature: 75°C@+40°C
Operating ambient temp.range: -20°C/+40°C
Cooling system: convection
LED device: Cree MC-E
Number of RGBW multichips: 12
Beam angle: 11°, 26°, 36°
Projected Lumen maintenance: 120,000 hrs ( L70@ 25°C / 77°F)
Protection factor: IP 67
Construction:
Body+ "U" bracket High-pressure die cast aluminium
transparent cover tempered glass
Weight: 8.3 kg
LED connection plug: Chogori 08BMMA-SL8001 (male)
LED connection cable: LiYY 8xAWG22 UL Style 2517/CSA O.D. 6,70mm
Unscrew the four socket head bolts 6x10 (1) in ArcSou-
rce Outdoor 48 MC housing and slide the top hat (2)
onto ArcSource outdoor 48 MC and secure it with four
socket head bolts 6x10 through holes (3) in the top head.

3
Dimensions (mm)
Top hat
Half top hat

4
Version 1.7, October 9, 2017
Specications are subject to change without notice
Floor stand
4. Accessories
1x Connector Chogori CGRBDU-08BFFA , IP68
5. Optional Accessories
(P/N. 13051960) Adapter cable CGRBDU-08BFFA/ CGRBDU-08BMMA, L=3m, IP68
(P/N. 13051966) Adapter cable CGRBDU-08BFFA/RJ4 RJ45, L=0.25m
(P/N. 10980173) Top Hat ArcSource Outdoor 48 MC
(P/N. 10980174) Half Top Hat ArcSource Outdoor 48 MC
(P/N. 1098 0176) Floor stand for ArcSource Outdoor 48 MC
(P/N 10980327) Pole Clamp for ASO 16/24/48MC, 63-80mm
(P/N 10980328) Pole Clamp for ASO 16/24/48MC, 80-105mm
(P/N 10980331) Tenon Adaptor for ASO 16/24/48MC 64-80mm
(P/N 10980332) Tenon Adaptor for ASO 16/24/48MC 80-106mm
(P/N 10980334) Land Spike for ASO 16/24/48MC