Anritsu MT1100A Network Master Flex User manual

MT1100AMT1100A
Network Master FlexNetwork Master Flex
Operation ManualOperation Manual
22nd Edition22nd Edition
For safety and warning information, please read thisFor safety and warning information, please read this
manual manual before attempting to use the equipment. before attempting to use the equipment.
Keep this manual with the equipment.Keep this manual with the equipment.
ANRITSU CORPORATIONANRITSU CORPORATION
Document No. M-W3735AE-22.0

MT1100A
Network Master Flex
Operation Manual
1 October 2014 (First Edition)
14 September 2018 (22nd Edition)
Copyright © 2014-2018, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior
written permission of the publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
22

About This ManualAbout This Manual
The documentation for MT1100A Network Master Flex applies to the instrument
with the MU110010A, MU110011A, MU110012A, MU110013A Module and the
MU110001A, MU110002A Power supply Module installed. This operation manual
describes both the basic operation of the instrument as well as the operations
available via interface options and predefined applications/tests.
MT1100A Network Master Flex Operation Manual (this manual)MT1100A Network Master Flex Operation Manual (this manual)
Operations for the MT1100A Network Master Flex mainframe with Multirate
Modules, Power Supply Modules are described.
MT1100A Network Master Flex Quick Reference GuideMT1100A Network Master Flex Quick Reference Guide
A printed quick user's guide that introduces the basic operation of the
instrument.
MT1000A Network Master Pro MT1100A Network Master Flex MT1000A Network Master Pro MT1100A Network Master Flex
Remote Scripting Operation ManualRemote Scripting Operation Manual
Operations of the command-based Remote Control function are described.
Manual structureManual structure
The contents of the manual is structured in the following way:
Chapter 1 - IntroductionChapter 1 - Introduction
Chapter 2 - ConfigurationChapter 2 - Configuration
Chapter 3 - Human-Machine-InterfaceChapter 3 - Human-Machine-Interface
Chapter 4 - Graphical User InterfaceChapter 4 - Graphical User Interface
Chapter 5 - SDH/SONET/PDH/DSn ApplicationsChapter 5 - SDH/SONET/PDH/DSn Applications
Chapter 6 - Ethernet ApplicationChapter 6 - Ethernet Application
Chapter 7 - OTN ApplicationsChapter 7 - OTN Applications
Chapter 8 - CPRI/OBSAI ApplicationsChapter 8 - CPRI/OBSAI Applications
Chapter 9 - Fibre Channel (FC) ApplicationsChapter 9 - Fibre Channel (FC) Applications
Chapter 10 - Device Test ApplicationsChapter 10 - Device Test Applications
Chapter 11 - Utility ApplicationsChapter 11 - Utility Applications
Chapter 12 - SpecificationsChapter 12 - Specifications
Chapter 13 - SupportChapter 13 - Support
Chapter 4 consists of a general introduction to the GUI. Chapters 5-11 contain
descriptions of each screen, sub-screen and major dialog. The descriptions are
provided in the following order:
Setup and result screens for each application. The applications are described
in the same order as they appear on the application selector screen.
Ports setup screens and status information for each interface type.
Sub-screens and dialog boxes are described under the main screen from which they
are activated/launched.
This operation manual assumes the reader has the following basic knowledge:
Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling
optical parts
33

44
1111
1212
1313
13
13
13
13
13
14
1515
15
15
15
15
16
1717
17
17
18
19
2020
20
20
21
21
22
23
2525
2626
26
26
2727
27
28
29
3030
30
3131
31
31
3232
3535
3636
3737
37
3939
4040
40
42
4343
43
43
44
Table of ContentsTable of Contents
00 Table of ContentsTable of Contents
11 IntroductionIntroduction
1.11.1 MainframeMainframe
1.21.2 ModulesModules
1.2.1 10G Multirate Module (MU110010A)
1.2.2 100G Multirate Module (MU110011A)
1.2.3 40/100G Module CFP2 (MU110012A)
1.2.4 40/100G Advanced Module (MU110013A)
1.2.5 Battery and AC Power Supply Module (MU110001A)
1.2.6 AC only High Power Supply Module (MU110002A)
1.31.3 Symbols and ConventionsSymbols and Conventions
1.3.1 Symbols Used in Manual
1.3.2 Safety Symbols Used on Equipment
1.3.3 Notes
1.3.4 Hints
1.3.5 Option
1.41.4 For SafetyFor Safety
1.4.1 Dangers
1.4.2 Warnings
1.4.3 Cautions
1.4.4 Cautions Against Computer Virus Infection
1.51.5 PrecautionsPrecautions
1.5.1 Installation
1.5.2 Ventilation
1.5.3 ESD (Electrostatic Discharge)
1.5.4 Optical Surfaces
1.5.5 Cautions on Handling Optical Fiber Cables
1.5.6 Countries and Regions Permitting WLAN Use
22 ConfigurationConfiguration
2.12.1 Delivered AccessoriesDelivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.22.2 Rechargeable BatteryRechargeable Battery
2.2.1 Installing or Replacing Battery
2.2.2 Charging Battery
2.2.3 Battery Status Information
2.32.3 Measurement CablesMeasurement Cables
2.3.1 Connecting Measurement Cables
2.42.4 Support Stand and Carrying StrapSupport Stand and Carrying Strap
2.4.1 Support Stand
2.4.2 Carrying Strap and Handle
2.52.5 Replacing the ModulesReplacing the Modules
33 Human-Machine-InterfaceHuman-Machine-Interface
3.13.1 Touch Screen DisplayTouch Screen Display
3.23.2 Key OperationKey Operation
3.2.1 Power Button
3.33.3 Head SetHead Set
3.43.4 Connector PanelConnector Panel
3.4.1 Test Interfaces
3.4.2 Service Interfaces
3.53.5 Remote OperationRemote Operation
3.5.1 Installation of Control Software
3.5.2 Connection and Setup
3.5.3 Communication Ports
Table of ContentsTable of Contents
44

45
47
47
47
48
5050
5151
5252
52
52
5454
54
54
5555
5757
5858
58
59
60
67
69
70
70
7171
71
83
8989
89
89
90
90
91
9393
9494
94
100
102
109
113113
113
119
121
124
125125
125
131
136
142
144144
144
149
152
155
156156
156
158
3.5.4 Starting Control Software
3.5.5 Remote Upgrade
3.5.6 Remote Wake Up
3.5.7 Remote Reset
3.5.8 Stand-alone Editor
3.63.6 Command-Based Remote ControlCommand-Based Remote Control
3.73.7 File Access via USB InterfaceFile Access via USB Interface
3.83.8 File Access via Ethernet InterfaceFile Access via Ethernet Interface
3.8.1 Accessing files in Network Master from the PC
3.8.2 Mounting the Shared Folder of Networked PC to the Network
Master
3.93.9 GPS ReceiverGPS Receiver
3.9.1 G0325A GPS Receiver
3.9.2 Operating GPS Receiver
3.103.10 Remote Control via GPIBRemote Control via GPIB
44 Graphical User InterfaceGraphical User Interface
4.14.1 General Handling of the GUIGeneral Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.4 Lamp Indication of Alarm/Error Status
4.1.5 Keypads for Entering Text in Fields
4.1.6 User Pattern Editor
4.1.7 Prompts to Confirm Dependencies
4.24.2 ToolbarsToolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.34.3 Startup and Switch-off SequencesStartup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
55 SDH/SONET/PDH/DSn ApplicationsSDH/SONET/PDH/DSn Applications
5.15.1 SDH Setup and StatusSDH Setup and Status
5.1.1 Transmitter Setup
5.1.2 Receiver Setup
5.1.3 Status Information
5.1.4 Errors/Alarms Insertion
5.25.2 SONET Setup and StatusSONET Setup and Status
5.2.1 Transmitter Setup
5.2.2 Receiver Setup
5.2.3 Status Information
5.2.4 Errors/Alarms Insertion
5.35.3 E1 Setup and StatusE1 Setup and Status
5.3.1 Transmitter Setup
5.3.2 Receiver Setup
5.3.3 Status Information
5.3.4 Errors/Alarms Insertion
5.45.4 DS1/J1 Setup and StatusDS1/J1 Setup and Status
5.4.1 Transmitter Setup
5.4.2 Receiver Setup
5.4.3 Status Information
5.4.4 Errors/Alarms Insertion
5.55.5 E3 Setup and StatusE3 Setup and Status
5.5.1 Transmitter Setup
5.5.2 Receiver Setup
55

160
161
162162
162
166
168
171
172172
172
174
175
176
177177
177
177
178
182182
182
182
187
198198
198
198
199
203203
204204
204
210
262
282
286286
286
286
298
308308
309
310310
310
310
311
314314
314
314
320
325325
325
326
327
328328
328
328
329
331331
331
332
333
334334
5.5.3 Status Information
5.5.4 Errors/Alarms Insertion
5.65.6 DS3 Setup and StatusDS3 Setup and Status
5.6.1 Transmitter Setup
5.6.2 Receiver Setup
5.6.3 Status Information
5.6.4 Errors/Alarms Insertion
5.75.7 E4 Setup and StatusE4 Setup and Status
5.7.1 Transmitter Setup
5.7.2 Receiver Setup
5.7.3 Status Information
5.7.4 Errors/Alarms Insertion
5.85.8 APSAPS
5.8.1 Ports Setup and Status
5.8.2 Test Setup
5.8.3 Test Results
5.95.9 BERTBERT
5.9.1 Ports Setup and Status
5.9.2 Test Setup
5.9.3 Test Results
5.105.10 RTDRTD
5.10.1 Ports Setup and Status
5.10.2 Test Setup
5.10.3 Test Results
66 Ethernet ApplicationsEthernet Applications
6.16.1 Ethernet Setup and StatusEthernet Setup and Status
6.1.1 Physical Port Setup
6.1.2 Ethernet Frame Setup
6.1.3 Status Information
6.1.4 Errors/Alarms Insertion
6.26.2 BERTBERT
6.2.1 Ports Setup and Status
6.2.2 Test Setup
6.2.3 Test Results
6.36.3 CableCable
6.3.1 Test Setup
6.46.4 Channel StatisticsChannel Statistics
6.4.1 Ports Setup and Status
6.4.2 Test Setup
6.4.3 Test Results
6.56.5 Mon/GenMon/Gen
6.5.1 Ports Setup and Status
6.5.2 Test Setup
6.5.3 Test Results
6.66.6 Pass ThroughPass Through
6.6.1 Ports Setup and Status
6.6.2 Test Setup
6.6.3 Test Results
6.76.7 PingPing
6.7.1 Ports Setup and Status
6.7.2 Test Setup
6.7.3 Test Results
6.86.8 ReflectorReflector
6.8.1 Ports Setup and Status
6.8.2 Test Setup
6.8.3 Test Results
6.96.9 RFC 2544RFC 2544
Table of ContentsTable of Contents
66

334
335
348
352
354354
354
355
360
365365
365
365
375
379379
379
380
381
382382
383
383
384
386
391391
392392
392
409
414
422
426
427427
427
427
428
431431
431
431
435
441441
441
441
442
445445
446446
447
448
452
455
457457
457
457
460
465465
465
465
465
467467
467
473
6.9.1 Ports Setup and Status
6.9.2 Test Setup
6.9.3 Test Results
6.9.4 Throughput Calculation
6.106.10 RFC 6349RFC 6349
6.10.1 Ports Setup and Status
6.10.2 Test Setup
6.10.3 Test Results
6.116.11 SAT 1564SAT 1564
6.11.1 Ports Setup and Status
6.11.2 Test Setup
6.11.3 Test Results
6.126.12 TracerouteTraceroute
6.12.1 Ports Setup and Status
6.12.2 Test Setup
6.12.3 Test Results
6.136.13 DiscoveryDiscovery
6.13.1 Ports Setup and Status
6.13.2 Test Setup
6.13.3 Test Results
6.13.4 Procedure
77 OTN ApplicationsOTN Applications
7.17.1 OTN Setup and StatusOTN Setup and Status
7.1.1 Transmitter Setup
7.1.2 Receiver Setup
7.1.3 Status Information
7.1.4 Error/Alarm Insertion
7.1.5 Restrictions for using two ports
7.27.2 APSAPS
7.2.1 Ports Setup and Status
7.2.2 Test Setup
7.2.3 Test Results
7.37.3 BERTBERT
7.3.1 Ports Setup and Status
7.3.2 Test Setup
7.3.3 Test Results
7.47.4 RTDRTD
7.4.1 Ports Setup and Status
7.4.2 Test Setup
7.4.3 Test Results
88 Mobile xHaul ApplicationsMobile xHaul Applications
8.18.1 CPRI/OBSAI Setup and StatusCPRI/OBSAI Setup and Status
8.1.1 Physical Port Setup
8.1.2 CPRI/OBSAI Frame Setup
8.1.3 Status Information
8.1.4 Error/Alarm Insertion
8.28.2 CPRI/OBSAI BERTCPRI/OBSAI BERT
8.2.1 Ports Setup and Status
8.2.2 Test Setup
8.2.3 Test Results
8.38.3 CPRI P. ThroughCPRI P. Through
8.3.1 Ports Setup and Status
8.3.2 Test Setup
8.3.3 Test Results
8.48.4 eCPRI/RoE BERTeCPRI/RoE BERT
8.4.1 Ports Setup and Status
8.4.2 Test Setup
77

473
473
477477
478478
479
480
484
486
488488
488
488
493
498498
498
499
506
511511
511
511
512
517517
518518
518
519
521
522522
522
522
523
527527
528528
528
530
532532
532
532
535535
536536
536
536
537
540
542542
545545
546546
546
547
547
548
548
549549
549
549
549
550550
550
8.4.2 Test Setup
8.4.3 Test Results
99 Fibre Channel (FC) ApplicationsFibre Channel (FC) Applications
9.19.1 Fibre Channel Setup and StatusFibre Channel Setup and Status
9.1.1 Physical Port Setup
9.1.2 Fibre Channel Frame Setup
9.1.3 Status Information
9.1.4 Errors/Alarms Insertion
9.29.2 BERTBERT
9.2.1 Ports Setup and Status
9.2.2 Test Setup
9.2.3 Test Results
9.39.3 PerformancePerformance
9.3.1 Ports Setup and Status
9.3.2 Test Setup
9.3.3 Test Results
9.49.4 ReflectorReflector
9.4.1 Ports Setup and Status
9.4.2 Test Setup
9.4.3 Test Results
1010 Device Test ApplicationsDevice Test Applications
10.110.1 Device Test Setup and StatusDevice Test Setup and Status
10.1.1 Physical Port Setup
10.1.2 Status Information
10.1.3 Errors/Alarms Insertion
10.210.2 No Frame TestNo Frame Test
10.2.1 Ports Setup and Status
10.2.2 Test Setup
10.2.3 Test Results
1111 Utility ApplicationsUtility Applications
11.111.1 ScenarioScenario
11.1.1 Scenario Manager
11.1.2 Running the Scenario
11.211.2 GPSGPS
11.2.1 Test Setup
11.2.2 Test Results
11.311.3 PDF ViewerPDF Viewer
11.411.4 VIPVIP
11.4.1 Application Toolbar
11.4.2 Connecting the Video Inspection Probe
11.4.3 Test Setup
11.4.4 Test Results
11.511.5 WiresharkWireshark
1212 SpecificationsSpecifications
12.112.1 MT1100AMT1100A
12.1.1 Configuration
12.1.2 External Interfaces
12.1.3 Other Interfaces
12.1.4 Environment Performance
12.1.5 Mechanical Performance
12.212.2 MU110001A, Battery and AC Power Supply ModuleMU110001A, Battery and AC Power Supply Module
12.2.1 Configuration
12.2.2 Environment Performance
12.2.3 Mechanical Performance
12.312.3 MU110002A, AC only High Power Supply ModuleMU110002A, AC only High Power Supply Module
12.3.1 Configuration
Table of ContentsTable of Contents
88

550
550
551551
551
552
556
556
557557
557
558
561
561
562562
562
563
565
565
566566
566
567
569
569
570570
570
582
593
604
605
607
609609
613613
614614
614
614
614
616616
617617
618618
618
618
619619
619
619
619
620620
620
620
620
621621
621
621
622
622
622
623623
627627
629629
12.3.2 Environment Performance
12.3.3 Mechanical Performance
12.412.4 MU110010A, 10G Multirate ModuleMU110010A, 10G Multirate Module
12.4.1 Configuration
12.4.2 External Interfaces
12.4.3 Environment Performance
12.4.4 Mechanical Performance
12.512.5 MU110011A, 100G Multirate ModuleMU110011A, 100G Multirate Module
12.5.1 Configuration
12.5.2 External Interfaces
12.5.3 Environment Performance
12.5.4 Mechanical Performance
12.612.6 MU110012A, 40/100G Module CFP2MU110012A, 40/100G Module CFP2
12.6.1 Configuration
12.6.2 External Interfaces
12.6.3 Environment Performance
12.6.4 Mechanical Performance
12.712.7 MU110013A, 40/100G Advanced ModuleMU110013A, 40/100G Advanced Module
12.7.1 Configuration
12.7.2 External Interfaces
12.7.3 Environment Performance
12.7.4 Mechanical Performance
12.812.8 Measurement FunctionalityMeasurement Functionality
12.8.1 Ethernet Measurements
12.8.2 SDH/SONET/PDH/DSn
12.8.3 OTN
12.8.4 Fibre Channel
12.8.5 CPRI/OBSAI
12.8.6 Device Test
12.912.9 Optical ModulesOptical Modules
1313 SupportSupport
13.113.1 Maintenance and CleaningMaintenance and Cleaning
13.1.1 Maintenance
13.1.2 Cleaning
13.1.3 Storage
13.213.2 CalibrationCalibration
13.313.3 Formatting the data area in the Network MasterFormatting the data area in the Network Master
13.413.4 Upgrading the SoftwareUpgrading the Software
13.4.1 Installation by using USB memory stick
13.4.2 Installation via Network
13.513.5 Support and Service AssistanceSupport and Service Assistance
13.5.1 Before you obtain assistance
13.5.2 Data Backup
13.5.3 Obtaining Support or Service Assistance
13.613.6 Transporting and DisposalTransporting and Disposal
13.6.1 Repackaging
13.6.2 Transporting
13.6.3 Disposal
13.713.7 Special InformationSpecial Information
13.7.1 Equipment Certificate
13.7.2 Anritsu Warranty
13.7.3 Anritsu Corporation Contact
13.7.4 Licensing Information
13.7.5 Availability of Source Code
13.813.8 Software License DocumentSoftware License Document
13.913.9 EULA License DocumentEULA License Document
13.1013.10 CE Conformity MarkingCE Conformity Marking
99

629
629
629
630
631
632632
632
632
633633
633
636
636
638638
638
638
638
638
639
640640
640
640
640
641
13.10.1 Product Model
13.10.2 Applied Directive
13.10.3 Applied Standards
13.10.4 Authorized Representative
13.10.5 CE Declaration
13.1113.11 RCM Conformity MarkingRCM Conformity Marking
13.11.1 Product Model
13.11.2 Applied Standards
13.1213.12 Laser SafetyLaser Safety
13.12.1 Laser Safety Classifications
13.12.2 Indication Labels on Product
13.12.3 Laser Radiation Markings
13.1313.13 Wireless CertificationWireless Certification
13.13.1 Japan MIC
13.13.2 North America (USA FCC and Canada IC)
13.13.3 Europe CE
13.13.4 Mexico IFETEL
13.13.5 Singapore IMDA
13.1413.14 DeclarationsDeclarations
13.14.1 Notes on Export Management
13.14.2 Information for EU and EFTA Customers Only
13.14.3 Information for U.S. Customers Only
13.14.4 Information for the Chinese Market Only
Table of ContentsTable of Contents
1010

11 IntroductionIntroduction
This chapter provides a general introduction to the MT1100A Network Master
Flex, and explains the symbols and conventions used in this manual.
1111

11..11 MainframeMainframe
The MT1100A Network Master Flex (hereafter called the Network Master and
sometimes the instrument ) is a multipurpose telecommunications test
instrument up to 100 Gbit/s interfaces for field use. It is a tool for a wide range
of applications from fast first-aid troubleshooting to comprehensive, in-depth
analysis of transmission problems. The installed options enable the Network
Master to be used both as a full-featured transmission line quality tester and as
an advanced signaling analyzer.
The Network Master features a wide TFT LCD display with touch screen
interface, where results are easily read and color coding and graphical symbols
aid the users in system setup and results analysis. The Network Master also
allows users to store applications settings to reduce time for future
configurations. For fast and efficient data transfer and external communication,
the Network Master houses LAN interface, Bluetooth
® and three USB ports.
Fault location is greatly facilitated by the high degree of portability of the
robust Network Master, allowing measurements to be taken at any suitable
measuring point. Accordingly, the Network Master can be powered either by a
rechargeable and replaceable intelligent high-capacity Li-Ion battery, or via
mains adapter for long-term measurements
Altogether, these features guarantee the supreme functionality of the Network
Master, allowing both convenience and optimal user-friendly operation.
For latest information, refer to the homepage below.
http://www.anritsu.com/en-us/test-measurement/products/mt1100a
IntroductionIntroduction
1212

11..22 ModulesModules
11..22..11 10G Multirate Module (MU110010A)10G Multirate Module (MU110010A)
The 10G Multirate module (MU110010A) allows the Network Master to test a
large variety of interfaces and systems up to 10 Gbps, like OTN interfaces,
Ethernet interfaces, SDH/SONET interfaces, Fibre Channel interfaces and
PDH/DSn interfaces. The MU110010A can be configured to have two ports at
all rates and interfaces. The instrument is thus ideal for both in-service and out-
of-service transmission-quality measurement.
11..22..22 100G Multirate Module (MU110011A)100G Multirate Module (MU110011A)
The 100G Multirate module (MU110011A) has RJ-45 electrical interface and
optical interfaces using SFP/SFP+, QSFP+ and CFP optical transceivers. These
interfaces allow users to test wide bit rates from 10Mbit/s to 100Gbit/s. With
the exception of the CFP interface which has 1 port, MU110011A can be
configured to have 2 ports.
11..22..33 40/100G Module CFP2 (MU110012A)40/100G Module CFP2 (MU110012A)
The 40/100G Module CFP2 (MU110012A) has connectors for QSFP+, CXP,
and CFP2 optical transceivers. These interfaces allow users to test bit rates of
40Gbit/s and 100Gbit/s. The MU110012A can be configured to have two ports
at all rates and interfaces.
11..22..44 40/100G Advanced Module (MU110013A)40/100G Advanced Module (MU110013A)
The 40/100G Advanced Module (MU110013A) has connectors for QSFP+,
CXP, and CFP2 optical transceivers as same as MU110012A. The MU110013A
also has Sync output connectors.
11..22..55 Battery and AC Power Supply Module (MU110001A)Battery and AC Power Supply Module (MU110001A)
The Battery and AC Power Supply Module (MU110001A) provides the power
to the Network Master and allows battery operation. The combination of the
Multirate modules is shown in the following table.
Module1Module1
NoneNone MU110010AMU110010A MU110011AMU110011A MU110012AMU110012A MU110013AMU110013A
ModuleModule
22
NoneNone N/A ✓ * * *
MU110010AMU110010A ✓ ✓ * * *
MU110011AMU110011A * * - - -
MU110012AMU110012A * * - - -
MU110013AMU110013A * * - - -
✓: Operable
* : Operable when AC power is supplied or two batteries are installed
- : Inoperable
ModulesModules
1313

11..22..66 AC only High Power Supply Module (MU110002A)AC only High Power Supply Module (MU110002A)
The AC only High Power Supply Module (MU110002A) provides the power to
the Network Master. Battery operation, however, is not allowed.
IntroductionIntroduction
1414

11..33 Symbols and ConventionsSymbols and Conventions
11..33..11 Symbols Used in ManualSymbols Used in Manual
To prevent the risk of personal injury or loss related to equipment malfunction,
Anritsu Corporation uses the following safety symbols to indicate safety-related
information. Ensure that you clearly understand the meanings of the symbols
BEFORE using the equipment. Some or all of the following symbols may be
used on all Anritsu equipment. In addition, there may be other labels attached
to products that are not shown in the diagrams in this manual.
DANGERDANGER This indicates a very dangerous procedure that could result in serious injury or
death if not performed properly.
WARNINGWARNING This indicates a hazardous procedure that could result in serious injury or death
if not performed properly.
CAUTIONCAUTION This indicates a hazardous procedure or danger that could result in light-to-
severe injury, or loss related to equipment malfunction, if proper precautions are
not taken.
11..33..22 Safety Symbols Used on EquipmentSafety Symbols Used on Equipment
The following safety symbols are used on Anritsu equipment near operation
locations to provide information about safety items and operation precautions.
Ensure that you clearly understand the meanings of the symbols and take the
necessary precautions BEFORE using the equipment.
This indicates a prohibited operation. The prohibited operation is indicated symbolically
in or near the barred circle.
This indicates an obligatory safety precaution. The obligatory operation is indicated
symbolically in or near the circle.
This indicates a warning or caution. The contents are indicated symbolically in or near
the triangle.
This indicates a note. The contents are described in the box.
These indicate that the marked part should be recycled.
A number of typographical conventions are used for easy spotting of
information. Examples below are shown in grey boxes in this section only to
indicate that they are 'examples'.
11..33..33 NotesNotes
The Note symbol indicates information, procedures or recommendations that need to be
followed to make correct measurements etc. Note text is written in italics to separate the
information from the other text elements on a page.
11..33..44 HintsHints
Symbols and ConventionsSymbols and Conventions
1515

The Hint symbol indicates information that should be treated as hints, suggestions,
recommendations etc. Hint text is written in italics to separate the information from the
other text elements on a page.
11..33..55 OptionOption
The Option symbol indicates that the information described covers an option (hardware
and software) and that this option must be installed before use. Text is written in italics
to separate the information from the other text elements on a page.
IntroductionIntroduction
1616

11..44 For SafetyFor Safety
This section contains warnings which should be followed to avoid personal
injury, product damage, as well as damage to the environment.
11..44..11 DangersDangers
DANGERDANGER
Replacing BatteryReplacing Battery When replacing the battery, use the specified battery and insert it with the
correct polarity. If the wrong battery is used, or if the battery is inserted with
reversed polarity, there is a risk of explosion causing severe injury or death.
FOR CALIFORNIA USA ONLYFOR CALIFORNIA USA ONLY
This product contains a CR Coin Lithium Battery which contains Perchlorate Material
- special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate.
Battery DisposalBattery Disposal DO NOT expose batteries to heat or fire. This is dangerous and can result in
explosions or fire. Heating batteries may cause them to leak or explode.
11..44..22 WarningsWarnings
WARNINGWARNING
ALWAYS refer to the operation manual when working near locations at which
the alert mark shown on the left is attached. If the advice in the operation
manual is not followed, there is a risk of personal injury or reduced equipment
performance. The alert mark shown on the left may also be used with other
marks and descriptions to indicate other dangers.
Overvoltage Category
This equipment complies with overvoltage category II defined in IEC 61010.
DO NOT connect this equipment to the power supply of overvoltage category
III or IV.
Laser radiation warning
NEVER look directly into the cable connector on the equipment nor into the
end of a cable connected to the equipment. There is a risk of injury if laser
radiation enters the eye.
The Laser Safety label is attached to the equipment for safety use as indicated
in "Laser Safety".
RepairRepair Only qualified service personnel with a knowledge of electrical fire and shock
hazards should service this equipment. This equipment cannot be repaired by
the operator. DO NOT attempt to remove the equipment covers or unit covers
or to disassemble internal components. In addition, there is a risk of damage
to precision components.
For SafetyFor Safety
1717

CalibrationCalibration The performance-guarantee seal verifies the integrity of the equipment. To
ensure the continued integrity of the equipment, only Anritsu service
personnel, or service personnel of an Anritsu sales representative, should
break this seal to repair or calibrate the equipment. Be careful not to break the
seal by opening the equipment or unit covers. If the performance-guarantee
seal is broken by you or a third party, the performance of the equipment
cannot be guaranteed.
Battery FluidBattery Fluid DO NOT short the battery terminals and never attempt to disassemble the
battery or dispose of it in a fire. If the battery is damaged by any of these
actions, the battery fluid may leak. This fluid is poisonous. DO NOT touch the
battery fluid, ingest it, or get in your eyes. If it is accidentally ingested, spit it
out immediately, rinse your mouth with water and seek medical help. If it
enters your eyes accidentally, do not rub your eyes, rinse them with clean
running water and seek medical help. If the liquid gets on your skin or clothes,
wash it off carefully and thoroughly with clean water.
LCDLCD This equipment uses a Liquid Crystal Display (LCD). DO NOT subject the
equipment to excessive force or drop it. If the LCD is subjected to strong
mechanical shock, it may break and liquid may leak. This liquid is very caustic
and poisonous. DO NOT touch it, ingest it, or get in your eyes. If it is ingested
accidentally, spit it out immediately, rinse your mouth with water and seek
medical help. If it enters your eyes accidentally, do not rub your eyes, rinse
them with clean running water and seek medical help. If the liquid gets on
your skin or clothes, wash it off carefully and thoroughly with soap and water.
11..44..33 CautionsCautions
CAUTIONCAUTION
Replacing MemoryReplacing Memory
Back-up BatteryBack-up Battery
This equipment uses a Poly-carbomonofluoride lithium battery to back up the
memory. This battery must be replaced by service personnel when it has reached the
end of its useful life; contact the Anritsu sales section or your nearest representative.
Note: The battery used in this equipment has a maximum useful life of 8 years. It should
be replaced before this period has elapsed.
The life of the battery will vary depending on the length of equipment usage and the
operating environment.
The following conditions may be observed if the battery has expired:
When power to the equipment is supplied, the time display may no longer
match the actual time.
Parameter and data settings may not be retained when the power to the
equipment is cut.
IntroductionIntroduction
1818

External StorageExternal Storage This equipment uses a USB memory as external storage media for storing data and
programs.
If this media is mishandled or becomes faulty, important data may be lost. It is
recommended to periodically back up all important data and programs to protect
them from being lost accidentally.
Anritsu will not be held responsible for lost data.
Pay careful attention to the following points:
Never remove the USB memory from the equipment while it is being accessed.
The USB memory may be damaged by static electric charges.
Anritsu has thoroughly tested all external storage media shipped with this
equipment. Users should note that external storage media not shipped with
this equipment may not have been tested by Anritsu, thus Anritsu cannot
guarantee the performance or suitability of such media.
Lifetime of PartsLifetime of Parts The life span of certain parts used in this equipment is determined by the operating
time or the power-on time. Due consideration should be given to the life spans of
these parts when performing continuous operation over an extended period. The
safety of the equipment cannot be guaranteed if component parts are used beyond
their life spans. These parts must be replaced at the customer's expense even if
within the guaranteed period described in Warranty at the end of this manual.
For details on life-span, refer to the corresponding section in this manual.
LCD: Brightness at 50% after 40,000hrs
Battery pack Capacity: 70% after 300 charge/discharge cycles
Use in ResidentialUse in Residential
EnvironmentEnvironment
This equipment is designed for an industrial environment. In a residential
environment, this equipment may cause radio interference in which case the user
may be required to take adequate measures.
Use in CorrosiveUse in Corrosive
AtmospheresAtmospheres
Exposure to corrosive gases such as hydrogen sulfide, sulfurous acid, and hydrogen
chloride will cause faults and failures.
Note that some organic solvents release corrosive gases.
11..44..44 Cautions Against Computer Virus InfectionCautions Against Computer Virus Infection
Copying files and dataCopying files and data
Only files that have been provided directly from Anritsu or generated using
Anritsu equipment should be copied to the instrument.
All other required files should be transferred by means of USB media after
undergoing a thorough virus check.
Adding softwareAdding software
Do not download or install software that has not been specifically
recommended or licensed by Anritsu.
Network connectionsNetwork connections
Ensure that the network has sufficient anti-virus security protection in place.
For SafetyFor Safety
1919

11..55 PrecautionsPrecautions
This section contains some precautions which should be followed to avoid
damage or malfunction due to incorrect use, handling and transportation of the
Network Master.
11..55..11 InstallationInstallation
Install MT1100A horizontally in a stable place.
CAUTIONCAUTION
If the MT1100A is not installed in a "good" direction as above, a small shock
may turn it over and harm the user.
11..55..22 VentilationVentilation
The instrument has built-in fans, to prevent the temperature to rise inside the
instrument.
CAUTIONCAUTION
Be sure not to block the ventilation holes.Be sure not to block the ventilation holes.
Install the MT1100A in a location with the vents at least 10 cm away from
walls, peripherals or other obstructions so as not to block the fan perimeter.
In this instrument, cooling air is taken in through the left side panel, and hot air
is exhausted through the right side panel. When using two or more instruments
side-by-side make sure that hot air exhausted from one unit is not taken into
the adjacent unit, otherwise overheating may occur.
IntroductionIntroduction
2020