Anritsu MT8820C User manual

Application Note
Revision History
Ver.
No
Date
Contents
Related product
software version
1.00
May 2015
MT8820C/21C LTE Application Note (Ver. 1.00) is based on
MT8820C LTE Application Note (Ver. 15.00).
Overall: Added MT8821C option model names to MT8820C option
model names
Overall: Added DL CA and UL CA test procedures for MT8821C
Added MT8821C software specification.
MX882012C/42C
Ver. 23.20
MX882112C/42C
Ver. 30.00
2.00
Sep 2015
・1.5.2 Added FDD-TDD 2,3DL/1UL CA, SISO and MIMO to
Supported CA Combination of MT8821C.
・2.4 / 3.6 / 5.3Added MT8821C connection/RX-measurement/
IP-data-transfer-test procedures for 4DL CA.
・3.3 Added MT8821C measurement procedures for Inter-band UL
CA.
・3.7 Added MT8821C UL Throughput measurement procedure for
SCC.
・7 Added MT8821C VoLTE Echoback test procedure.
・Annex B.2 Added mention of Carrier Leakage Frequency for
measurements on MT8821C intra-band contiguous CC.
・Annex B.3 Added description about optimization of TCP Throughput
by Iperf.
・AnnexB.4 Added maximum rate setting for DL 256QAM.
MX882012C/42C
Ver23.20
MX882112C/42C
Ver30.10
LTE Measurement
Radio Communication Analyzer MT8820C/MT8821C

2
Contents
LTE Measurement Software..........................................................................................61.
SPECIFICATIONS...................................................................................................................................... 61.1. MT8820C ........................................................................................................................................ 61.1.1.
MT8821C ...................................................................................................................................... 131.1.2.
3GPPMEASUREMENT SPECIFICATION (3GPPTS 36.521-1 V12.5.0(2015-03)) TABLE ..........................221.2.
OPERATION BANDS................................................................................................................................311.3.
BAND 13 SUPPLEMENTARYRF CONFORMANCE MEASUREMENT SPECIFICATION TABLE ...............331.4.
SUPPORTED CACOMBINATION ..............................................................................................................331.5. MT8820C ......................................................................................................................................331.5.1.
MT8821C ...................................................................................................................................... 351.5.2.
The Basic Operations...................................................................................................382.
LTE NON CA......................................................................................................................................... 382.1. Connection Diagram ...................................................................................................................382.1.1.
Initial Condition Setting .............................................................................................................. 392.1.2.
Location Registration ..................................................................................................................392.1.3.
Test Mode Connection and Disconnection ...............................................................................392.1.4.
Broadcast Information Update ..................................................................................................402.1.5.
2DLCAWITHOUT ULCA/2DLCAWITH ULCA......................................................................................412.2.
Connection Diagram ...................................................................................................................412.2.1.
Synchronizing Frame Timing between 2 Cells..........................................................................472.2.2.
Initial Condition Setting .............................................................................................................. 482.2.3.
Location Registration ..................................................................................................................522.2.4.
Test Mode Connection and Disconnection ...............................................................................522.2.5.
Inter-Frequency Handover .........................................................................................................522.2.6.
Bandwidth Handover ..................................................................................................................532.2.7.
Changing DL/UL RB Allocation and MCS Index of each CCs....................................................542.2.8.
3DLCA ................................................................................................................................................ 562.3.
Connection Diagram ...................................................................................................................562.3.1.
Synchronizing Frame Timing among 3 Cells............................................................................. 602.3.2.
Initial Condition Setting .............................................................................................................. 622.3.3.
Location Registration ..................................................................................................................642.3.4.
Test Mode Connection and Disconnection ...............................................................................642.3.5.
Inter-Frequency Handover .........................................................................................................652.3.6.
Bandwidth Handover ..................................................................................................................662.3.7.
Changing DL/UL RB Allocation and MCS Index of Each CCs....................................................672.3.8.
4DLCA ................................................................................................................................................ 682.4.
Connection Diagram ...................................................................................................................682.4.1.
Initial Condition Setting .............................................................................................................. 712.4.2.
Location Registration ..................................................................................................................722.4.3.
Test Mode Connection and Disconnection ...............................................................................722.4.4.
Inter-Frequency Handover .........................................................................................................732.4.5.
Bandwidth Handover ..................................................................................................................74
2.4.6.
Changing DL/UL RB Allocation and MCS Index of Each CCs....................................................752.4.7.

3
TRX Measurements (Fundamental Measurements) ...............................................763.
TX MEASUREMENTS.............................................................................................................................. 763.1.
UE Maximum Output Power (6.2.2) ...........................................................................................763.1.1.
UE Maximum Output Power for HPUE (6.2.2_1) .......................................................................773.1.2.
Maximum Power Reduction (MPR) (6.2.3).................................................................................783.1.3.
Maximum Power Reduction (MPR) for HPUE (6.2.3_1)............................................................. 793.1.4.
Maximum Power Reduction (MPR) for Multi-Cluster PUSCH (6.2.3_2) ...................................803.1.5.
Configured UE transmitted Output Power (6.2.5) ....................................................................813.1.6.
Configured UE transmitted Output Power for HPUE (6.2.5_1)................................................823.1.7.
Minimum Output Power (6.3.2)..................................................................................................823.1.8.
General ON/OFF time mask (6.3.4.1) .........................................................................................833.1.9.
PRACH time mask (6.3.4.2.1) ....................................................................................................843.1.10.
SRS time mask (6.3.4.2.2).......................................................................................................... 85
3.1.11.
Power Control Absolute power tolerance (6.3.5.1) ................................................................863.1.12.
Power Control Relative power tolerance (6.3.5.2) ..................................................................873.1.13.
Aggregate Power Control tolerance (6.3.5.3) .........................................................................883.1.14.
Power Control Absolute power tolerance for HPUE (6.3.5.1_1.1) ......................................... 883.1.15.
Power Control Relative power tolerance for HPUE (6.3.5.2_1.2)...........................................883.1.16.
Aggregate power control tolerance for HPUE (6.3.5_1.3)......................................................883.1.17.
Frequency Error (6.5.1) .............................................................................................................893.1.18.
Error Vector Magnitude (EVM) - PUSCH (6.5.2.1) ....................................................................903.1.19.
Error Vector Magnitude (EVM) - PUCCH (6.5.2.1).................................................................... 913.1.20.
Error Vector Magnitude (EVM) - PRACH (6.5.2.1) ....................................................................923.1.21.
PUSCH-EVM with exclusion period (6.5.2.1A)..........................................................................933.1.22.
Carrier leakage (6.5.2.2)............................................................................................................943.1.23.
In-band emissions for non allocated RB - PUSCH (6.5.2.3)....................................................943.1.24.
In-band emissions for non allocated RB - PUCCH (6.5.2.3)....................................................963.1.25.
EVM equalizer spectrum flatness (6.5.2.4) ..............................................................................983.1.26.
Occupied bandwidth (6.6.1)....................................................................................................1003.1.27.
Spectrum Emission Mask (6.6.2.1) .........................................................................................1013.1.28.
Spectrum Emission Mask for Multi-Cluster PUSCH (6.6.2.1_1)............................................1033.1.29.
Adjacent Channel Leakage Power Ratio (6.6.2.3) .................................................................1043.1.30.
Adjacent Channel Leakage Power Ratio for HPUE (6.6.2.3_1) .............................................1063.1.31.
Adjacent Channel Leakage Power Ratio for Multi-Cluster PUSCH (6.6.2.3_2)....................1063.1.32.
Additional Maximum Power Reduction (A-MPR) (6.2.4).......................................................1073.1.33.
Additional Maximum Power Reduction (A-MPR) for HPUE (6.2.4_1)...................................108
3.1.34.
Additional Spectrum Emission Mask (6.6.2.2)....................................................................... 1093.1.35.
RX MEASUREMENTS ............................................................................................................................1103.2.
Reference sensitivity level (7.3) .................................................................................................1103.2.1.
Maximum input level (7.4) .........................................................................................................1113.2.2.
3.2.3. Spurious emissions (7.9) ............................................................................................................112
TX MEASUREMENTS FOR CA................................................................................................................1133.3.
TX Measurements for Inter-band CA........................................................................................1133.3.1.
TX Measurements for Intra-band Contiguous CA ..................................................................1293.3.2.
RX MEASUREMENTS FOR CA...............................................................................................................1483.4.
Reference sensitivity level for CA (intra-band contiguous DL CA and UL CA) (7.3A.1) ........1483.4.1.
Reference sensitivity level for CA (intra-band contiguous DL CA without UL CA) (7.3A.2)..148
3.4.2.
Reference sensitivity level for CA (inter-band DL CA without UL CA) (7.3A.3)......................1493.4.3.
Reference sensitivity level for CA (intra-band non-contiguous DL CA without UL CA)3.4.4.

4
(7.3A.4) 149
Maximum input level for CA (intra-band contiguous DL CA and UL CA) (7.4A.1) ................1503.4.5.
Maximum input level for CA (intra-band contiguous DL CA without UL CA) (7.4A.2)..........1513.4.6.
Maximum input level for CA (inter-band DL CA without UL CA) (7.4A.3)..............................1513.4.7.
Maximum input level for CA (intra-band non-contiguous DL CA without UL CA) (7.4A.4)..1513.4.8.
RX MEASUREMENTS FOR 3DLCA.......................................................................................................1523.5.
Throughput Measurement Example .......................................................................................1523.5.1.
RX MEASUREMENTS FOR 4DLCA.......................................................................................................1543.6.
Throughput Measurement Example .......................................................................................1543.6.1.
RX MEASUREMENTS FOR MT8821C ULCA2CCS..............................................................................1553.7. Restrictions .................................................................................................................................1553.7.1. Required options.........................................................................................................................1553.7.2. Connection Diagram...................................................................................................................156
3.7.3. UL Throughput Measurement.....................................................................................................1563.7.4.
TEST PARAMETERS SUPPORTING 3GPPTEST ITEMS............................................................................1593.8.
REMOTE COMMANDS LIST LIMITING PASS/FAIL JUDGMENT....................................................................1643.9.
BAND 13 SUPPLEMENTARY RF CONFORMANCE MEASUREMENT .........................1704.
PUCCH OVER-PROVISIONING FUNCTIONALTEST(2.7) ............................................................1704.1.
SPURIOUS EMISSIONS WITHTX GATING (2.9)............................................................................1704.2.
IP Data Transfer Test .................................................................................................1725.
IPDATA TRANSFER TEST FOR NON CA(SINGLE CELL)..........................................................................1725.1. Connection Diagram .................................................................................................................1725.1.1.
Application Server Connection and Setting ............................................................................1755.1.2.
Client PC Connection and Setting ............................................................................................1835.1.3.
Initial Condition Setting ............................................................................................................ 1845.1.4.
Location Registration and Packet Connection........................................................................1895.1.5.
TCP/UDP Throughput................................................................................................................1945.1.6.
IP Data Transfer Test with Connected DRX.............................................................................1965.1.7.
RRC State Transition Test..........................................................................................................1975.1.8.
IPDATA TRANSFER TEST FOR 2DLCA.................................................................................................1985.2. Connection Diagram .................................................................................................................2005.2.1.
Application Server Connection and Setting ............................................................................2035.2.2.
Client PC Connection and Setting ............................................................................................2065.2.3.
Synchronizing Frame Timing Between 2 Cells........................................................................2065.2.4.
Initial Condition Settings ..........................................................................................................2075.2.5.
Location Registration and Packet Connection........................................................................2155.2.6.
TCP/UDP Throughput................................................................................................................2165.2.7.
IPDATA TRANSFER TEST FOR 3/4DLCA..............................................................................................2175.3. Connection Diagram .................................................................................................................2185.3.1.
Application Server Connection and Setting ............................................................................2205.3.2.
Client PC Connection and Setting ............................................................................................2205.3.3.
Initial Condition Settings ..........................................................................................................2215.3.4.
Location Registration and Packet Connection........................................................................2285.3.5.
TCP/UDP Throughput................................................................................................................229
5.3.6.
RRM ..............................................................................................................................2306.

5
1PORT CS FALLBACK/REDIRECTION ....................................................................................................2306.1.
CS Fallback to W-CDMA/Redirection to W-CDMA ...................................................................230
6.1.1.
CS Fallback to TD-SCDMA/Redirection to TD-SCDMA............................................................. 2316.1.2.
CS Fallback to GSM/Redirection to GSM..................................................................................2326.1.3.
CS Fallback to CDMA2000/Redirection to CDMA2000............................................................2336.1.4.
Redirection to 1xEV-DO.............................................................................................................2346.1.5.
CELL RESELECTION.............................................................................................................................2356.2. Cell Selection Criterion..............................................................................................................2356.2.1.
Measurement Rules for Cell Reselection.................................................................................2376.2.2.
Inter-RAT Cell Reselection Criteria ...........................................................................................2386.2.3.
Intra-Frequency and Equal Inter-Frequency Cell Reselection Criteria..................................2386.2.4.
Cell ReselectionProcedure........................................................................................................2396.2.5.
MEASUREMENT REPORT......................................................................................................................242
6.3.
Initial Condition Setting ............................................................................................................ 2426.3.1.
Measurement Report Procedure .............................................................................................2426.3.2.
LTE VoLTE Echoback Test (MT8821C Only) ..............................................................2467.
LTE VOLTE ECHOBACK TEST..............................................................................................................2467.1.
Connection Diagram .................................................................................................................2467.1.1.
Application Server Connection and Setting ............................................................................2477.1.2.
Initial Condition Setting ............................................................................................................ 2537.1.3.
Registration and IMS Registration...........................................................................................2557.1.4.
Echoback Test ............................................................................................................................2557.1.5.
Downlink Fixed Data Test .........................................................................................................2567.1.6.
Downlink SID Data Test ............................................................................................................2567.1.7.
Annex A: ARB Waveform List........................................................................................258
A.1.ARBWAVEFORM INSTALLER VERSION:Q007 ......................................................................................258
A.2.ARBWAVEFORM INSTALLER VERSION:Q008 ......................................................................................258
Annex B: Informative ....................................................................................................260
B.1. UE DL-SCH RX.................................................................................................................................260
B.1.1. UE Category............................................................................................................................... 260
B.1.2. Code Rate...................................................................................................................................260
B.1.3. Error Free Setting......................................................................................................................263
B.2. CARRIER LEAKAGE FREQUENCY..........................................................................................................264
B.2.1. Transmitter LO Configuration..................................................................................................264
B.2.2. TX Measurement Parameter....................................................................................................265
B.3.ABOUT OPTIMIZATION OF THE TCPTHROUGHPUT USING IPERF.............................................................266
B.3.1. Setting of TCP Window Size......................................................................................................266
B.4. SETTING FOR DL256QAM MAXIMUM THROGHPUT RATE.....................................................................267

6
LTE Measurement Software1.
Specifications1.1.
MT8820C1.1.1.
1.1.1.1. MX882012C/13C (Call Processing)
Table 1.1.1.1-1 LTE Measurement Software Specifications (MX882012C/13C)
Measurement Item
Specifications
Electrical
Typical values (typ.) are only for reference and are not guaranteed.
Modulation Analysis
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –40 to +35 dBm (Main1)
Carrier frequency
accuracy ±(Set frequency × Reference oscillator accuracy
+15 Hz)
Modulation accuracy
Residual vector error ≤2.5% (400 to 2700 MHz)
(3400 to 3800 MHz, 18° to 28°C)
(When measurement count is 20)
≤3.0% (3400 to 3800 MHz, 20 measurements)
In-band Emissions ≤–40 dB
(≥–10 dBm, Allocated RB≤18)
Measurement object PUSCH, PRACH, PUCCH
Amplitude
Measurement
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –60 to +35 dBm (Main1)
Measurement accuracy ±0.5 dB (–20 to +35 dBm),
typ. ±0.3 dB (–20 to +35 dBm)
±0.7 dB (–50 to –20 dBm)
±0.9 dB (–60 to –50 dBm)
400 to 2700 MHz, 10° to 40°C after calibration
±0.5 dB (–20 to +35 dBm, 18° to 28°C),
typ. ±0.3 dB (–20 to +35 dBm, 18° to 28°C),
±0.7 dB (–50 to –20 dBm),
±0.9 dB (–60 to –50 dBm),
3400 to 3800 MHz, 10° to 40°C after calibration
Linearity ±0.2 dB (–40 to 0 dB, ≥–50 dBm)
±0.4 dB (–40 to 0 dB, ≥–60 dBm)
400 to 2700 MHz
±0.2 dB (–40 to 0 dB, ≥–50 dBm, 18° to 28°C),
±0.3 dB (–40 to 0 dB, ≥–50 dBm)
±0.4 dB (–40 to 0 dB, ≥–60 dBm)
3400 to 3800 MHz, 10° to 40°C after calibration
Relative measurement error
<2 dB
typ. ±0.10 dB (–40 to 0 dB, ≥–50 dBm)

7
Measurement Item
Specifications
Measurement object PUSCH, PRACH, PUCCH
Occupied Bandwidth
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Adjacent Channel
Leakage Power
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Measurement point E-UTRA ACLR1
UTRA ACLR1
UTRA ACLR2
Measurement range ≥45 dB (E-UTRA ACLR1)
≥50 dB (UTRA ACLR1)
≥55 dB (UTRA ACLR2)
Spectrum Emission
Mask
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
RF Signal Generator
Output frequency 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz (1-Hz steps)
(Can be used when installing MT8820C-018 option)
AWGN level Off, –20 to +5 dB (0.1-dB steps,
Relative level with Ior (Total power))
AWGN level accuracy ±0.2 dB (Relative level accuracy with Ior)
Throughput
Measurement
Function Measures throughput using RMC
Measurement object ACK and NACK reported from UE
Call Processing
Call control Position registration, Call processing using RMC
(Executes each processing in 3GPP standards and performs Pass/Fail evaluation)
UE Control Output level
(Executes each UE control in 3GPP standards)

8
1.1.1.2. MX882012C/13C-006
Table 1.1.1.2-1 LTE FDD/TDD IP Data Transfer
Item
Specifications
Function
The Ethernet port of the LTE measurement hardware can be used to transfer
data to external devices.
1.1.1.3. MX882012C/13C-011
Table 1.1.1.3-1 LTE FDD/TDD 2x2 MIMO DL
Item
Specifications
Function
This can be used to measure the Rx performance of 2x2 MIMO mobile wireless
terminals.
RF Signal Generator
Output frequency: 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.1.4. MX882012C/13C-016
Table 1.1.1.4-1 LTE FDD/TDD CS Fallback to W-CDMA/GSM
Item
Specification
Function
Supports CS fallback to W-CDMA or GSM using MT8820Cs
1.1.1.5. MX882012C/13C-017
Table 1.1.1.5-1 LTE FDD/ TDD CS Fallback to CDMA2000
Item
Specification
Function
Supports CS fallback to CDMA2000 using MT8820Cs
1.1.1.6. MX882013C-018
Table 1.1.1.6-1 LTE TDD CS Fallback to TD-SCDMA/GSM
Item
Specification
Function
Supports CS fallback to TD-SCDMA or GSM using MT8820Cs

9
1.1.1.7. MX882012C/13C-021
Table 1.1.1.7-1 LTE-Advanced FDD/TDD DL CA Measurement Software
Item
Specification
Function
The reception measurements of DL 2CCs and UL 1CC described in Chapter 7 of
3GPP TS 36.521-1 and the maximum throughput tests are supported.
The maximum throughput test for DL CA 2x2 MIMO is supported by using with
the MX882012C/13C -011 2x2 MIMO DL option.
RF Signal Generator
Output frequency: 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.1.8. MX882012C/13C-022
Table 1.1.1.8-1 LTE-Advanced FDD/TDD UL CA Measurement Software
Item
Specification
Function
When this option is installed with the LTE Advanced FDD/TDD DL CA
measurement software (MX882012C/13C-021) it supports a function to operate
as a Mobile Wireless Device and measurements for RF Transition and
Reception on UL CA.
Intra-Band Contiguous DL CA and UL CA is NOT supported.
Modulation Analysis
Equivalent to MX882012C/13C in respective CC measurements
RF Power
Equivalent to MX882012C/13C in respective CC measurements
Occupied Bandwidth
Equivalent to MX882012C/13C in respective CC measurements
Adjacent Channel
Leakage Power
Equivalent to MX882012C/13C in respective CC measurements
Spectrum Emission
Mask
Equivalent to MX882012C/13C in respective CC measurements
RF Signal Generator
Output frequency: 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.1.9. MX882012C/13C-026
Table 1.1.1.9-1 LTE-Advanced FDD/TDD DL CA IP Data Transfer
Item
Specifications
Function
IP data transfer with external devices by using Ethernet port of LTE
measurement hardware is supported in DL CA.

10
1.1.1.10. MX882012C/13C-031
Table 1.1.1.10-1 LTE-Advanced FDD/TDD DL CA 3CCs Measurement Software
Item
Specifications
Function
The reception measurements for DL 3CCs and UL 1CC, and maximum
throughput tests are supported.
The maximum throughput test for DL CA 2x2 MIMO is supported by using with
the MX882012C/13C-011 LTE FDD/TDD 2x2 MIMO DL option.
RF Signal Generator
Output frequency: 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE

11
1.1.1.11. MX882042C/43C (Non-Call Processing)
Table 1.1.1.11-1 Measurement Software Specifications (MX882042C/43C) (1/2)
Measurement Item
Specifications
Electrical
Typical values (typ.) are only for reference and are not guaranteed.
Frequency/Modulation
Measurement
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –40 to +35 dBm (Main1)
Carrier frequency
accuracy ±(Set frequency × Reference oscillator accuracy
+15 Hz)
Modulation accuracy
Residual vector error ≤2.5% (400 to 2700 MHz)
(3400 to 3800 MHz, 18° to 28°C)
(When measurement count is 20)
≤3.0% (3400 to 3800 MHz, 20 measurements)
In-band Emissions ≤–40 dB
(≥–10 dBm, Allocated RB≤18)
Measurement object PUSCH
Amplitude
Measurement
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –60 to +35 dBm (Main1)
Measurement accuracy ±0.5 dB (–20 to +35 dBm)
typ. ±0.3 dB (–20 to +35 dBm)
±0.7 dB (–50 to –20 dBm)
±0.9 dB (–60 to –50 dBm)
400 to 2700 MHz, 10° to 40°C after calibration
±0.5 dB (–20 to +35 dBm, 18° to 28°C),
typ. ±0.3 dB (–20 to +35 dBm, 18 to 28°C),
±0.7 dB (–50 to –20 dBm),
±0.9 dB (–60 to –50 dBmv
3400 to 3800 MHz, 10° to 40°C after calibration
Linearity ±0.2 dB (–40 to 0 dB, ≥–50 dBm),
±0.4 dBv–40 to 0 dB, ≥–60 dBm),
400 to 2700 MHz
±0.2 dB (–40 to 0 dB, ≥–50 dBm, 18° to 28°C),
±0.3 dB (–40 to 0 dB, ≥–50 dBm),
±0.4 dB (–40 to 0 dB, ≥–60 dBm),
3400 to 3800 MHz, 10° to 40°C after calibration
Relative measurement error
<2 dB
typ. ±0.10 dB (–40 to 0 dB, ≥–50 dBm)
Measurement object PUSCH

12
Table 1.1.1.11-2 Measurement Software Specifications (MX882042C/43C) (2/2)
Measurement Item
Specifications
Occupied Bandwidth
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Adjacent Channel
Leakage Power
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Measurement point E-UTRA ACLR1
UTRA ACLR1
UTRA ACLR2
Measurement range ≥45 dB (E-UTRA ACLR1)
≥50 dB (UTRA ACLR1)
≥55 dB (UTRA ACLR2)
Spectrum Emission
Mask
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)

13
MT8821C1.1.2.
1.1.2.1. MX882112C/13C (Call Processing)
Table 1.1.2.1-1 LTE Measurement Software Specifications (MX882112C/13C) (1/3)
Measurement Item
Specifications
Electrical
Typical values (typ.) are only for reference and are not guaranteed.
Frequency/Modulation
measurement
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
For frequencies below 500 MHz, only the following
range meets the specifications:
452.5 to 457.5 MHz (LTE OperatingBand31)
Input level –40 to +35 dBm (Main1/2)
Carrier frequency
accuracy ±(Set frequency × Reference oscillator accuracy +15 Hz)
Modulation accuracy
Residual vector error ≤ 2.5% (400 MHz ≤ Freq. ≤ 3800 MHz)
(When measurement count is 20)
≤ 3.5% (3800 MHz < Freq. ≤ 5000 MHz)
(When measurement count is 20)
In-band Emissions ≤–40 dB
(≥–10 dBm, Allocated RB ≤ 18)
Measurement object PUSCH, PRACH, PUCCH
Amplitude
Measurement
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
For frequencies below 500 MHz, only the following
range meets the specifications:
452.5 to 457.5 MHz (LTE OperatingBand31)
Input level –60 to +35 dBm (Main1/2)
Measurement accuracy ±0.5 dB (–20 to +35 dBm)
typ. ±0.3 dB (–20 to +35 dBm)
±0.7 dB (–50 to –20 dBm)
±0.9 dB (–60 to –50 dBm)
400 MHz ≤ Freq. ≤ 3800 MHz
10° to 40°C after calibration
±0.7 dB (–20 to +35 dBm)
±0.9 dB (–50 to –20 dBm)
±1.1 dB (–60 to –50 dBm)
3800 MHz <freq.≤ 5000 MHz
20° to 30°C after calibration
Linearity ±0.2 dB (–40 to 0 dB, ≥–50 dBm)
±0.4 dB (–40 to 0 dB, ≥–60 dBm)
400 to 5000 MHz
Measurement object PUSCH, PRACH, PUCCH

14
Table 1.1.2.1-1: LTE Measurement Software Specifications (MX882112C/13C) (2/3)
Measurement Item
Specifications
Occupied Bandwidth
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
For frequencies below 500 MHz, only the following
range meets the specifications:
452.5 to 457.5 MHz (LTE OperatingBand31)
Input level –10 to +35 dBm (Main1/2)
Channel bandwidth 1.4 MHz, 3 MHz, 5 MHz
(452.5 MHz ≤ UL frequency ≤ 457.5 MHz)
1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz,
20 MHz (500 MHz ≤ UL frequency)
Adjacent Channel
Leakage Power
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
For frequencies below 500 MHz, only the following
range meets the specifications:
452.5 to 457.5 MHz (LTE OperatingBand31)
Input level –10 to +35 dBm (Main1/2)
Measurement point E-UTRA ACLR1
UTRA ACLR1
UTRA ACLR2
Measurement range ≥ 45 dB (E-UTRA ACLR1)
≥ 50 dB (UTRA ACLR1)
≥ 55 dB (UTRA ACLR2)
Channel bandwidth 1.4 MHz, 3 MHz, 5 MHz
(452.5 MHz ≤ UL frequency ≤ 457.5 MHz)
1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz
20 MHz (500 MHz ≤ UL frequency)
Spectrum Emission
Mask
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
For frequencies below 500 MHz, only the following
range meets the specifications:
452.5 to 457.5 MHz (LTE OperatingBand31)
Input level –10 to +35 dBm (Main1/2)
Channel bandwidth 1.4 MHz, 3 MHz, 5 MHz
(452.5 MHz ≤ UL frequency ≤ 457.5 MHz)
1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz,
20 MHz (500 MHz ≤ UL frequency)

15
Table 1.1.2.1-1: LTE Measurement Software Specifications (MX882112C/13C) (3/3)
Measurement Item
Specifications
RF Signal Generator
Output frequency 400 to 3800 MHz (1-Hz steps)
3800 to 6000 MHz (1-Hz steps)
(Can be used when installing MT8821C-019 option)
AWGN level Off, –20 to +5 dB (0.1-dB steps,
Relative level with Ior (Total power))
AWGN level accuracy ±0.2 dB (Relative level accuracy with Ior)
Throughput
Measurement
Function Measures throughput using RMC
Measurement object ACK and NACK reported from UE
Call Processing
Call control Position registration, Call processing using RMC
(Executes each processing in 3GPP standards and performs Pass/Fail evaluation)
UE Control Output level
(Executes each UE control in 3GPP standards)

16
1.1.2.2. MX882112C/13C-006
Table 1.1.2.2-1 LTE FDD/TDD IP Data Transfer
Item
Specifications
Function
The Ethernet port of the LTE measurement hardware can be used to transfer
data to external devices.
1.1.2.3. MX882112C/13C-011
Table 1.1.2.3-1 LTE FDD/TDD 2x2 MIMO DL
Item
Specifications
Function
This can be used to measure the Rx performance of 2x2 MIMO mobile wireless
terminals.
RF Signal Generator
Output frequency: 400 to 3800 MHz (1-Hz steps)
400 to 6000 MHz
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.2.4. MX882112C/13C-016
Table 1.1.2.4-1 LTE FDD/TDD CS Fallback to W-CDMA/GSM
Item
Specification
Function
Supports CS fallback to W-CDMA or GSM using MT8821C
1.1.2.5. MX882112C/13C-017
Table 1.1.2.5-1 LTE FDD/ TDD CS Fallback to CDMA2000
Item
Specification
Function
Supports CS fallback to CDMA2000 using MT8821C
1.1.2.6. MX882113C-018
Table 1.1.2.6-1 LTE TDD CS Fallback to TD-SCDMA/GSM
Item
Specification
Function
Supports CS fallback to TD-SCDMA or GSM using MT8821C

17
1.1.2.7. MX882112C/13C-021
Table 1.1.2.7-1 LTE-Advanced FDD/TDD DL CA Measurement Software
Item
Specification
Function
The reception measurements for DL 2CCs and UL 1CC described in Chapter 7
of 3GPP TS 36.521-1 and the maximum throughput tests are supported.
The maximum throughput test for DL CA 2x2 MIMO is supported by using with
the MX882012C/13C -011 2x2 MIMO DL option.
RF Signal Generator
Output frequency: 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz
(Can be used when installing MT8821C-018 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.2.8. MX882112C/13C-022
Table 1.1.2.8-1 LTE-Advanced FDD/TDD UL CA Measurement Software
Item
Specification
Function
This can be used to measure the functions and Tx/Rx performance of UEs at
2CCs UL CA.
Frequency 500 to 3800 MHz
3800 to 4200 MHz
(Can be used when installing MT8821C-019 option)
Modulation Analysis
Same as MX882112C for CC measurements. The measurement target is only
PUSCH.
Amplitude
Measurement
Same as MX882112C except measurement accuracy and linearity in CC
measurements. The measurement target is only PUSCH.
Measurement accuracy ±0.7 dB (–20 to +35 dBm)
±0.9 dB (–50 to –20 dBm)
500 MHz ≤Freq. ≤ 3000 MHz
10° to 40°C after calibration
±1.0 dB (–50 to +35 dBm)
±1.3 dB (–60 to –50 dBm)
3000 MHz < Freq. ≤ 3800 MHz
10° to 40°C after calibration
±1.0 dB (–50 to +35 dBm),
±1.3 dB (–60 to –50 dBm),
3800 MHz < Freq. ≤ 4200 MHz,
20° to 30°C after calibration
(At Intraband Continuous CA SCC, PCC+SCC
measurement)
Linearity ±0.2 dB
(–40 to 0 dB, ≥–50 dBm, 20° to 30°C
after calibration),
±0.4 dB (–40 to 0 dB, ≥–60 dBm, 20° to 30°C
after calibration),
500 to 4200 MHz

18
Table 1.1.2.8-1 LTE-Advanced FDD/TDD UL CA Measurement Software (Cont’d)
Occupied Bandwidth
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
Adjacent Channel
Leakage Power
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
Spectrum Emission
Mask
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
RF Signal Generator
Output frequency 400 to 3800 MHz (1-Hz steps)
3800 to 6000 MHz (1-Hz steps)
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function Throughput measurement using RMC
Measurement target ACK and NACK reported from UE
1.1.2.9. MX882112C/13C-026
Table 1.1.2.9-1 LTE-Advanced FDD/TDD DL CA IP Data Transfer
Item
Specifications
Function
At DL CA, IP data transfer is supported by using the internal server of the
MT8821C, or IP data transfer with external devices is supported by using the
Ethernet port of the LTE measurement hardware.

19
1.1.2.10. MX882112C/13C-031
Table 1.1.2.10-1 LTE-Advanced FDD/TDD DL CA 3CCs Measurement Software
Item
Specifications
Function
The reception measurements for DL 3CCs and UL 1CC, and the maximum
throughput tests are supported.
The maximum throughput test for DL CA 2x2 MIMO is supported by using with
the MX882012C/13C-011 LTE FDD/TDD 2x2 MIMO DL option.
RF Signal Generator
Output frequency: 400 to 3800 MHz (1-Hz steps)
400 to 6000 MHz
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.2.11. MX882112C/13C-036
Table 1.1.2.11-1 LTE-Advanced FDD/TDD DL CA 3CCs IP Data Transfer
Item
Specifications
Function
At DL CA 3CCs, IP data transfer is supported by using the internal server of the
MT8821C, or IP data transfer with external devices is supported by using the
Ethernet port of the LTE measurement hardware.
1.1.2.12. MX882112C/13C-041
Table 1.1.2.12-1 LTE-Advanced FDD/TDD DL CA 4CCs Measurement Software
Item
Specifications
Function
The reception measurements for DL 4CCs and UL 1CC, and the maximum
throughput tests are supported.
The maximum throughput test for DL CA 2x2 MIMO is supported by using with
the MX882012C/13C-011 LTE FDD/TDD 2x2 MIMO DL option.
RF Signal Generator
Output frequency: 400 to 3800 MHz (1-Hz steps)
400 to 6000 MHz
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function: Throughput measurement using RMC
Measurement target: ACK and NACK reported from UE
1.1.2.13. MX882112C/13C-046
Table 1.1.2.13-1 LTE-Advanced FDD/TDD DL CA 4CCs IP Data Transfer
Item
Specifications
Function
At DL CA 4CCs, IP data transfer is supported by using the internal server of the
MT8821C, or IP data transfer with external devices is supported by using the
Ethernet port of the LTE measurement hardware.

20
1.1.2.14. MX882142C/43C (Non-Call Procsssing)
Table 1.1.2.14-1 Measurement Software Specifications (MX882042C/43C) (1/2)
Measurement Item
Specifications
Electrical
Typical values (typ.) are only for reference and are not guaranteed.
Frequency/Modulation
Measurement
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
Input level –40 to +35 dBm (Main1/2)
Carrier frequency
accuracy ±(Set frequency × Reference oscillator accuracy
+15 Hz)
Modulation accuracy
Residual vector error ≤2.5% (400 to 3800 MHz)
(When measurement count is 20)
≤3.5% (3800 to 5000 MHz)
(When measurement count is 20)
In-band Emissions ≤–40 dB
(≥–10 dBm, Allocated RB≤18)
Measurement object PUSCH
Amplitude
Measurement
Frequency 400 to 3800 MHz
3800 to 5000 MHz
(Can be used when installing MT8821C-019 option)
Input level –60 to +35 dBm (Main1/2)
Measurement accuracy ±0.5 dB (–20 to +35 dBm)
typ. ±0.3 dB (–20 to +35 dBm)
±0.7 dB (–50 to –20 dBm)
±0.9 dB (–60 to –50 dBm)
400 to 3800 MHz, 10° to 40°C after calibration
±0.7 dB (–20 to +35 dBm)
±0.9 dB (–50 to –20 dBm)
±1.1 dBv–60 to –50 dBm)
3800 to 5000 MHz, 10° to 40°C after calibration
Linearity ±0.2 dB (–40 to 0 dB, ≥–50 dBm)
±0.4 dB (–40 to 0 dB, ≥–60 dBm)
400 to 5000 MHz
Measurement object PUSCH